technical sheet TowerPro harness ref.:

technical sheet TowerPro harness ref.:
technical
sheet
TowerPro harness
ref.:
rev. no.:
date:
page:
T-4638U
3
09/09
1/3
The TowerPro harness from the Versafit family has all the same performance
characteristics with the addition of design features specific to tower, mast, and
aerial climbing industries. This product is intended for technicians and professionals
who spend the majority of their working time climbing up and down vertical
structures.
With a full range of adjustment in legs, shoulders and chest areas the TowerPro is
the embodiment of comfort and function. Padded shoulders, waist, legs, and saddle
(saddle optional) reduces fatigue and greatly increases comfort. Quick connect
chest assembly offers full adjustment accommodating all body shapes and allows
for easy exit and entry into the harness. The waist pad/tool belt combination
accommodates up to three pouches with the belt being removable. The seat support
(saddle) has a rigid internal aluminium stay preventing “pelvic pinch” and is
completely removable from the harness if the user so desires.
For further information, refer to “Use and Maintenance Instructions” for harnesses,
belts and lanyards.
Features
• Tongue and buckle legs and waist
• Work positioning
• Fixed chest strap to prevent riding or creep from the weight of twin arm
lanyards
• Lanyard positioning retainers that control lanyard arm entanglement
• Full floating deluxe back plate
• Fully padded legs, waist and shoulders
• Tool racking capability
• Removable belt accomodates all marks and models of tool pouch
• Fall indicators / inspection tag / serial number
• Two colors: blue shoulder straps and black leg straps
FBBL/SAD
Sizes
• Small:
• Medium:
• Large:
• X-large:
• XX-large:
FBBS
FBBM
FBBL
FBBXL
FBBXXL
Accessory
• XSAD1: Optional Pro-seat saddle
Applications
• Climbing masts, towers, and aerials
• Rope access
• Industrial rigging
• Vertical lifeline
• Ladder climbing
• Ideal for use with ascender and descender devices used within chair work
(window cleaning)
• Fall arrest
Applicable Standards
• ANSI Z359.1-2007 and A10.32-2004
• OSHA fall protection requirements
© 2009 Tractel ®. All rights reserved.
Specifications are subject to change without notice.
Drawings are for illustrative purposes only.
technical
sheet
TowerPro harness
ref.:
rev. no.:
date:
page:
T-4638U
3
09/09
2/3
AVAILABLE MODELS
FBB_ – Tongue and buckle legs
FBB_/SAD – Tongue and buckle legs
• With Pro-seat saddle
Tongue and buckle legs
Pro-seat saddle
Lanyard arm retainer
Thick shoulder pads
Deluxe back plate
Sternum attachment
point (ladder climbing)
Sewn fixed front
attachment assembly
Lanyard clip
Quick-connect
adjustment/front
attachment assembly
Spring loaded
adjuster upper
shoulder adjustment
Removable heavy-duty tool
belt with 3 pouches capacity
Adjustable sub-pelvic strap
Padded tongue
and buckle leg
loops
Large saddle
positioning D-rings
© 2009 Tractel ®. All rights reserved.
Laminated wrap around
foam waist pad
Large front positioning
D-ring compatible with
spreader hook assembly
Removable suspension
saddle with internal
stay for pelvic support
laminated wrap around
foam pad
Specifications are subject to change without notice.
Drawings are for illustrative purposes only.
technical
sheet
ref.:
rev. no.:
date:
page:
TowerPro harness
PARTS
SPECIFICATIONS
APPLICABLE STANDARDS
Standard webbing
High tenacity polyester
Width: 13⁄4 in. (45 mm)
Thickness: 1⁄16 in. (1.4 mm)
Tensile strength: 5,700 lbs. (25.4 kN)
Webbing is heat-cut to prevent fraying.
ANSI Z359.1-2007
CSA Z259.10-06
Tongue and buckle
webbing (legs)
High tenacity Polyester
Width: 13⁄4 in. (45 mm)
Thickness: 1⁄8 in. (3 mm)
Tensile strength: 10,000 lbs. (44.5 kN)
Webbing is heat-cut to prevent fraying.
ANSI Z359.1-2007
CSA Z259.10
Stitching
Thread is lock-stitched. Thread: #138 polyester
CSA Z259.12-01
Back and side D-ring
Plating: zinc dichromate
Proof-loaded 100% at 3,600 lbs. (16 kN)
Tensile strength: 5,000 lbs. (22.2 kN)
ANSI Z359.1-2007
CSA Z259.12-01
Sliding bar adjuster
Plating: zinc dichromate
Tensile strength: 4,000 lbs. (17.8 kN)
ANSI Z359.1-2007
CSA Z259.12-01
Sternal D-ring
Plating: zinc dichromate
Proof load 100% at 3,600 lbs. (16 kN)
Tensile strength: 5,000 lbs. (22.2 kN)
ANSI Z359.1-2007
CSA Z259.12-01
Quick connect buckle
Plating: zinc dichromate
Minimum tensile strength: 4,000 lbs. (17.8 kN)
ANSI Z359.1-2007
CSA Z259.12-01
Tongue and buckle
Plating: zinc dichromate
Minimum tensile strength: 4,000 lbs. (17.8 kN)
ANSI Z359.1-2007
CSA Z259.12-01
Grommets
#2 spur brass
Shoulder pads
Foam: closed cell EVA 80
Outer fabric: polyester
Thickness: 1⁄4 in. (5 mm)
Leg pads
Thermal formed foam laminate EVA 80
Outer fabric: polyester
Thickness: 1⁄4 in. (5 mm)
Back support foam
Closed cell foam laminate
Outer fabric: polyester
Thickness: 1⁄2 in. (12 mm)
Tool belt webbing
High tenacity Polyester
Width: 13⁄4 in. (45 mm)
Thickness: 1⁄8 in. (3 mm)
Tensile strength: 8,500 lbs. (37.8 kN)
Webbing is heat-cut to prevent fraying.
ANSI Z359.1-2007
CSA Z259.10-06
Capacity
310 lbs. (140 kg), one person
ANSI Z359.1-2007
© 2009 Tractel ®. All rights reserved.
T-4638U
3
09/09
3/3
Specifications are subject to change without notice.
Drawings are for illustrative purposes only.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising