PRID_10999_doc_150.527_Beamz_MHL_715WiSpot_7x_15W_QUAD_DMX_2.4Ghz (Öppnas i nytt fönster)

PRID_10999_doc_150.527_Beamz_MHL_715WiSpot_7x_15W_QUAD_DMX_2.4Ghz (Öppnas i nytt fönster)
Ref. No.: 150.527
MHL-715WISPOT 7X 15W QUAD
DMX 2.4GHZ
MANUAL
‐ 1 ‐ Thank you for purchasing our company products.
Please read these instructions carefully to enjoy optimum performance and a longer service life before
you start to use.
CONTENTS
Unpacking Inspections ............................................................................................................. 2
Unpacking instructions ...................................................................................................... 2
Checking the contents of the carton: ................................................................................. 2
Safety Instructions .................................................................................................................... 3
Product Overview ..................................................................................................................... 3
Functions Introductions ............................................................................................................ 3
Main Functions .................................................................................................................. 3
Main Instructions ............................................................................................................... 4
System menu .................................................................................................................... 5
Operating instructions ....................................................................................................... 7
DMX channels ................................................................................................................... 8
Maintenance ........................................................................................................................... 10
Specification ........................................................................................................................... 10
UNPACKING INSPECTIONS
Unpacking instructions


Please unpack the carton and check the goods carefully when you receive it , if discover
packing damage, shortage or quality problem, please notify the shipper and reject the goods.
Before using this product, please read the instructions carefully and keep it in a safe place for
future reference.
Checking the contents of the carton:
The product, Power cord, Instruction Manual, Mounting Bracket
‐ 2 ‐ Safety Instructions
















Safety and regulatory power socket with high quality output should be used .
Always connect the product to a grounded circuit to avoid the risk of electrocution.
Never put tiny metal objects such as a screwdriver, iron wire and coins, etc. into the internal or
stretch into the machine in case of short circuit .
Please make sure to connect the proper voltage and do not higher or lower than that stated on
the decal or rear panel of the product .
Avoid hitting, crashing or squeezing with other objects in transportation. Never carry the
product from the power cord or any moving part . Always use the hanging / mounting bracket
or the handles.
The product is used in door only .
Never pull or tug on the cord and change it for another one , stop using it when it is damaged
or becomes hot .
Stop using the product once there is sparks when connecting with the power plug .
Can not operate product with wet hands and never place it near the water or other liquid.
Make sure there are no flammable materials close to the fixture while operating . Always install
it in a location with adequate ventilation.
Never replace the lighting source with different specification and rating when the original one
is damaged.
Make sure to power off before replacing the light source or the fuse. Never do it while it is on.
The ambient temperature is no more than 40°C(104°F) .
Never clean the fixture by water, thinner or other dissolved agent .
Stop using the product in case of a serious operating problem and send it to our maintenance
agent immediately. Never repair by non-professional workers .
Avoid direct eye exposure to the light source while the product is on.
PRODUCT OVERVIEW
FUNCTIONS INTRODUCTIONS
Main Functions






9 or 13 DMX channels .
Sound active, (wireless) DMX, master/slave mode .
7x 15W high quality QUAD LEDs.
With static colors, strobe, dimmer, color mixing and changing effects.
Pan/Tilt inversion
Electronic dimming 0 – 100%
‐ 3 ‐ System menu
‐ 4 ‐ DMX Address – Set the DMX address
Press the UP or DOWN button until “DMX address” is displayed, press ENTER.
“X” will now be displayed, (“X” represents the displayed address). Press the UP or DOWN button to
find the desired address. Press ENTER to confirm
Channel mode – Select the desired channel mode
Press the UP or DOWN button until “Channel mode” is displayed, press enter.
“X Ch” will now be displayed, (“X” represents the displayed channel mode). Press the UP or DOWN
button to find the desired channel mode. Press ENTER to confirm.
Dimmer curve – Select the desired dimmer curve
Press the UP or DOWN button until “Dimmer Curve” is displayed, press ENTER.
“Mode X” will now be displayed, (“X” represents the displayed dimmer mode).
The modes are:
Dimmer mode 1 (linear): Steady, even increase in dimming
Dimmer mode 2 (Square law): Provides finer dimmer control near full intensity
Dimmer mode 3 (Inverse square law): Provides finer dimming control at lower intensities.
Dimmer mode 4 (S-Curve): Similar to Linear dimming with finer dimming control at mid level
intensities.
Press the UP or DOWN button to find the desired dimmer mode. Press ENTER to confirm.
Operation Mode
Auto mode – This function will run the pre-programmed program
Enter “Operation mode”
Press the UP or DOWN button until “Auto mode” is displayed, press ENTER.
There are 3 auto modes, press the UP or DOWN button to select the desired mode, press ENTER to
confirm.
Music mode – In this mode you can select your desired sound active mode
Enter “Operation mode”
Press the UP or DOWN button until “Music mode” is displayed, press ENTER.
Master mode – In this mode you can select your desired master mode
Enter “Operation mode”
Press the UP or DOWN button until “Master mode” is displayed, press ENTER.
Press the UP or DOWN button to select the desired master mode, press ENTER.
Slave mode – In this mode the unit functions as a slave
Enter “Operation mode”
Press the UP or DOWN button until “Slave mode” is displayed, press ENTER.
DMX mode – In this mode the unit can be controlled by a DMX controller
Enter “Operation mode”
Press the UP or DOWN button until “DMX-512” is displayed, press ENTER.
‐ 5 ‐ System setting
Display time – With this function you can make the backlight automatically turn off after the
time you desire.
Enter “System setting”
Press the UP or DOWN button until “Display Time” is displayed, press ENTER.
Press the UP or DOWN button to select the desired turn off time (5, 10 or 15sec), select “Normally on”
to keep the backlight on at all times.
Press ENTER to confirm.
Pan invert – Pan inversion
Enter “System setting”
Press the UP or DOWN button until “Pan Invert” is displayed, press ENTER.
Press the UP or DOWN button until “Yes” is displayed, press ENTER to confirm.
To deactivate select “NO”, press ENTER to confirm.
Tilt invert – Tilt inversion
Enter “System setting”
Press the UP or DOWN button until “Tilt Invert” is displayed, press ENTER.
Press the UP or DOWN button until “Yes” is displayed, press ENTER to confirm.
To deactivate select “NO”, press ENTER to confirm.
Mic sensitivity – Adjust the sensitivity of the music mode
Enter “System setting”
Press the UP or DOWN button until “Mic sensitivity” is displayed, press ENTER.
Press the UP or DOWN button to adjust the sensitivity level. 0 = lowest, 100 = most sensitive.
Press ENTER to confirm.
Factory defaults – Restore factory defaults
Enter “System setting”
Press the UP or DOWN button until “Factory Defaults” is displayed, press ENTER.
Press the UP or DOWN button until “Yes” is displayed, press ENTER to confirm.
The unit will restore factory default settings.
Wireless control – Wireless DMX control switch
Enter “System setting”
Press the UP or DOWN button until “Wireless control” is displayed, press ENTER.
Press the UP or DOWN button until “Yes” is displayed, press ENTER to confirm.
The wireless control will be available.
Reset – Use this function to reset the unit
Press the UP or DOWN button until “Reset” is displayed, press ENTER.
The unit will reset now.
‐ 6 ‐ Manual test – Use this function to manually test the units individual features
Press the UP or DOWN button until “Manual test” is displayed, press ENTER.
Press the Up or DOWN button to find the function or colors you want to test.
Once you found the function press ENTER. Now you can adjust the values by pressing the UP or
DOWN button.
To finish testing press ENTER.
Information
Temperature – With this function you can display the running temperature of the unit.
Enter “Information menu”
Press the UP or DOWN button until “Temperature” is displayed, press ENTER.
The current running temperature of the unit will be displayed.
Fixture time – With this function you can display the running time of the unit.
Enter “Information menu”
Press the UP or DOWN button until “Fixture time” is displayed, press ENTER.
The current running time of the unit will be displayed.
Version – Will display the software version of the unit.
Enter “Information menu”
Press the UP or DOWN button until “Version” is displayed, press ENTER.
The software version of the unit will be displayed.
Product serial – Will display the product serial of the unit.
Enter “Information menu”
Press the UP or DOWN button until “Product serial” is displayed, press ENTER.
The product serial of the unit will be displayed.
Operation Instructions
DMX connection.
Master / Slave connection.
‐ 7 ‐ DMX Channels:
13 Channel settings:
‐ 8 ‐ 9 Channel settings:
‐ 9 ‐ MAINTENANCE
The unit should be cleaned periodically to ensure the optimum performance, the smudginess can
decrease the life of light and the output of light is affected by the dust which can make the machine
overheating. In general, make the maintenance at least two times a month. Be sure to power off the
unit before cleaning .
Do not clean until the unit recovers normal temperature since high temperature for using, use the lens
tissue or soft cotton cloth with alcohol to wipe gently.
Cleaning frequency depends on the environment in which the fixture operates, damp, smoky or dirty
surrounding can cause greater accumulation of dirt on the optics. Never rub or press strongly on the
panel.
Specification
Head movement:Pan 250°
Head movement:Tilt 540°
Beam angle
13°
Light intensity
20000 lux @ 2m
No. of LEDs
7x 15W Quad LEDs
DMX channels
9 or 13
Connector
3-pin XLR
Power Supply
100-240Vac / 50Hz
Dimensions
273 x 167 x 331mm
Weight
4.5kg
‐ 10 ‐ CE Declaration of Conformity
Importer:
TRONIOS BV
Bedrijvenpark Twente 415
7602 KM - ALMELO
Tel :
0031546589299
Fax :
0031546589298
The Netherlands
Product number:
150.527
Product Description:
MHL-715WiSpot 7x 15W QUAD DMX 2.4Ghz
Regulatory Requirement:
EN 60598-1/-2-17
EN 55015
EN 61547
EN 61000-3-2/-3-3
EN 300 440-1/-2
The product meets the requirements stated in the above mentioned Standards.
13-12-2012
Signature
:
‐ 11 ‐ Specifications and design are subject to change without prior notice.. www.tronios.com Copyright © 2013 by TRONIOS the Netherlands ‐ 12 ‐ 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising