Enabling Devices 3289 Volcano Lamp User's guide

Below you will find brief information for Volcano Lamp 3289. The Volcano Lamp 3289 features a unique design that simulates a volcanic eruption, providing a captivating visual experience. The lamp uses red lava beads that erupt from the volcano when activated, creating a mesmerizing display. The lamp is designed to enhance visual attention and can be used with or without an external switch. The Volcano Lamp includes a built-in motor and LED lights to enhance the eruptions.

PDF Download
Document
Volcano Lamp 3289 User's Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Simulates a volcanic eruption
  • Uses red lava beads
  • Enhances visual attention
  • Can be used with or without an external switch
  • Includes built-in motor and LED lights
  • Requires 3 AA batteries

Frequently asked questions

The Volcano Lamp requires 3 AA batteries. Use alkaline batteries only (e.g. Duracell or Energizer brand). Do not use rechargeable, heavy-duty or any other type of batteries because they supply lower voltage and the unit will not perform properly. Never mix old and new batteries together or different brands or types together.

Plug in your external capability switch into the female 1/8" jack, located in the side of the Volcano Lamp. Make sure the male plug is pressed firmly into the female jack, there should be not gaps. Set the Volcano Lamp’s ON/OFF switch to OFF. You can now activate the flowing Lava with your switch.

Make sure that you press all connections firmly together. Any gaps may interrupt electrical connection. Volcano Lamp’s ON/OFF switch needs to be set to OFF for external switch use. Make sure batteries are fresh. Try a different switch with your Volcano Lamp to rule it out as the source of the problem.
Preparing document for printing…
0%