Catálogos VX 6000
VX-6000 SERIES
HIGH POWER VHF/UHF Mobile Radios
250 CHANNEL CAPACITY
POWER OUTPUT: 120 W (LOW BAND),
110 W (VHF), 100 W (UHF)
12.5 / 25 kHz BANDWIDTH
PROGRAMMABLE PER CHANNEL
2.5 kHz STEP FOR VHF/UHF
LARGE 8-DIGIT ALPHANUMERIC DISPLAY
7 PROGRAMMABLE BACKLIT KEYS
PRIORITY SCAN / GROUP SCAN
DUAL BAND CAPABILITY
ONE RF DECK TO MULTI HEAD
CAPABILITIES
DTMF SIGNALING & DIALING FEATURES
AUDIO COMPANDER
USER SELECTABLE TONES / CODES
CTCSS / DCS ENCODE + DECODE
EMERGENCY FUNCTIONS
ROLLING CODE ENCRYPTION
RADIO TO RADIO CLONE FEATURE
TALK AROUND
BCLO, BTLO, AND TOT FUNCTIONS
BUILT IN 25 PIN (DB-25) ACCESSORY
CONNECTOR
HEAVY-DUTY PUBLIC SAFETY
MICROPHONE AVAILABLE
MIL- STD 810 C/D/E
VX-6000
SERIES
High Power, High Spec, Reliability, Ruggedness and Versatility: these
are the essential elements in a successful communications system. Vertex
Standard VX-6000 provides the features, performance, and toughness to
get your message through under the most demanding public safety operating
conditions. It’s a perfect blend of rugged design, flexible signaling
options, superb ergonomics, and expandability, making the VX-6000
series an outstanding choice for your future communications needs.
VERSATILITY
MULTI CONFIGURATION SYSTEM
ONE RF DECK TO MULTIPLE HEAD CAPABILITIES
DUAL BAND CAPABILITY
A single VX-6000 RF Deck may be controlled by two
different Control Heads, allowing control of the radio from
more than one location. Depending on the installation
requirements, both Control Heads may be connected
directly to the RF Deck, or the two Control Heads may be
connected in a series "Daisy Chain" configuration.
Two VX-6000 Control Heads and RF Decks, on different
bands, may be networked to allow multi-band operation.
VHF, UHF, or VHF Low Band radios may be combined to
meet complicated communications requirements involving
federal, state, and local government and/or forestry operations.
RF DECK (VHF)
CT-81, CT-82, CT-83 or CT-93
Dual Band,
Single Head Remote
Single Head Remote
CONTROL HEAD
RMK-4000SH
RF DECK (UHF)
CT-81, CT-82, CT-83 or CT-93
RF DECK (VHF or UHF)
RMK-4000DB
RF DECK (VHF or UHF)
CONTROL HEAD
RF DECK (VHF)
RF DECK (UHF)
CT-81, CT-82, CT-83 or CT-93
CNT-6000
CT-81, CT-82, CT-83 or CT-93
Dual Head Remote
CONTROL HEAD
RMK-4000DH
RMK-4000DBH
CONTROL HEAD
CONTROL HEAD
CONTROL HEAD
RF DECK (VHF or UHF)
RF DECK (VHF)
RF DECK (UHF)
CT-81, CT-82, CT-83 or CT-93
RMK-4000DH
CNT-6000
RMK-4000DBH
CT-81, CT-82, CT-83 or CT-93
CONTROL HEAD
CONTROL HEAD
CONTROL HEAD
Dual Band, Dual Head
Remote
CONTROL HEAD
250 CHANNEL CAPACITY
Huge 250-channel capacity may be partitioned into as many
as 20 Memory Groups, with no limit on the number of
channels in each Group. A single radio may therefore be
programmed with channel sets for a number of different
jurisdictions or organizations.
USER SELECTABLE TONES / CODES
PRIORITY SCAN
The VX-6000 includes a built-in standard DB-25 connector, for
ease of integration of the radio into your communications system.
The DB-25 connector includes a number of logic status lines,
Squelch state and level indicators, and
Data I/O connections. Horn Alert and
other accessories also can be connected
through the DB-25 connector.
The VX-6000’s versatile scanning system includes a Priority
Scan function, which provides scanning of all channels (or
channels within a Memory Group) while maintaining a priority
watch on a particularly important channel. Scanning will halt
immediately, and operation will revert to the Priority Channel if
activity is detected on the Priority Channel.
GROUP SCAN
The versatile scanning options allow simple scanning of selected
channels, and scanning with a priority channel. The group scan
feature allows scanning of multiple groups at the same time.
This is critical for those mutual aid and disaster preparedness
situations where communications among many agencies is a must.
DTMF SIGNALING & DIALING FEATURES
When used with the optional MH-53B7A DTMF Microphone,the
VX-6000 may be configured for both manual and Speed Dial
DTMF calling. All versions provide programmable PTT ANI for
business or fleet applications.
CTCSS / DCS ENCODE + DECODE
Field programming of the CTCSS tones or DCS codes is available,
allowing access to multiple systems or quick configuration for multijurisdictional operations.
High-performance Encoder/Decoder circuits for both CTCSS and
Digital Code Squelch are provided for access to tone/code
controlled systems.
BUILT IN 25 PIN (DB-25) ACCESSORY CONNECTOR
INTERNAL ACCESSORY INTERFACING
The VX-6000 Series is easily interfaced to 3rd-party accessories.
The optional CN-6 Interface Unit provides a quick interconnection
platform for signaling, control, and other accessory boards used
in public safety environments.
HIGH PERFORMANCE
POWER OUTPUT: 120 W (LOW BAND), 110 W (VHF), 100 W (UHF)
The VX-6000’s construction includes a massive, die-cast
outer case which doubles as the heatsink. And the Automatic
Power Control (APC) circuit ensures stable power output
over a very wide range of ambient temperatures.
WIDE-BAND COVERAGE
Coverage beyond typical frequency limits allows programming
in "guard band" channel allocations, and ensures compatibility
for programming in a wide variety of locations.
12.5/25 kHz BANDWIDTH PROGRAMMABLE PER CHANNEL
SECURITY
EMERGENCY FUNCTIONS
The VX-6000 may be programmed to transmit an Emergency
DTMF ANI burst, with or without a live microphone engaged,
to alert the dispatcher to an emergency situation requiring
assistance to the user.
The VX-6000 may be programmed with Wide or Narrow operating
bandwidths, channel by channel, to conform to your local channel
ENCRYPTION
environment. Ideal for multi-jurisdiction operations.
The FVP-25 Encryption Unit or FVP-35 Rolling code encryption
2.5 kHz STEP FOR VHF/UHF
Unit provides security for your important public safety and
Ensuring full compatibility with all channel loading requirements,
private security communications, and it also includes a DTMF
the VX-6000’s synthesizer provides 2.5 kHz resolution. Channel
Paging function(FVP-25) for selective calling.
programming therefore is straightforward in all configuration situations.
INTERNAL EMERGENCY MICROPHONE
COMPANDER INCLUDED
In an emergency situation, the VX-6000
For narrow-band channel applications, the built-in Audio
can transmit using an internal microphone
Companding system compresses the voice waveform during
should the regular microphone become
transmission, and expands it during reception, allowing fulldamaged or otherwise unusable.
sounding audio despite the restricted transmission bandwidth.
EASY USER INTERFACE
LARGE 8-DIGIT ALPHANUMERIC DISPLAY
Providing indication of either the channel number or an
Alphanumeric Channel Label of up to 8 characters, the LCD
display utilizes large, bold characters on its high-intensity
backlit amber LED display to provide excellent visibility over
a wide range of viewing angles and in difficult lighting situations.
BUSY/TX LEDs
Alpha-Numeric Display
POWER Switch
Front-Facing Speaker
Channel Group Keys
DURABLE CONSTRUCTION
DIE-CAST CONSTRUCTION ALUMINUM CHASSIS/ENCLOSURE
The one-piece die-cast enclosure for the VX-6000 doubles
as its chassis, yielding extreme strength for resistance against
shock and vibration. This uniquely
rugged construction ensures that
specifications and functionality
will be maintained for many years,
despite the shock, vibration, and
other abuse typically experienced
by radios in public safety use.
HIGH-RELIABILITY CONSTRUCTION
Home Channel Key
Home Channel LED
Emergency Microphone
Volume Control
Programmable Function Keys
Channel Selector
7 PROGRAMMABLE BACKLIT KEYS
The ABS front panel is
sealed by a robust O-ring,
and all switches are covered
by U-shaped silicone rubber
gaskets to protect the internal
circuitry from dust, humidity,
salt fog, and driving rain.
The front panel keys may be programmed by the dealer for a
variety of operating functions, allowing customization of the
front panel functions to your unique requirements. The keys
are illuminated from behind, as well, for easy viewing at night. WATER-SHIELD MICROPHONE CONNECTION
The multi-pin microphone connector on the side of the VX-6000,
LOUD 5W/10W AUDIO OUTPUT
The VX-6000’s high-powered audio (5 Watts standard, 10 Watts sealed for protection against weather, provides a convenient
optional) is coupled to a large, front-facing speaker, producing connection point for the available microphones. Its gold-plated
high-quality, crisp audio that will punch through even in the contacts ensure many years of reliable service.
noisy environments experienced by public safety officers.
STATUS QUICK-CHECK (SQC) FEATURE
The VX-6000 can be programmed to include the Status Quick
Check (SQC) feature, which allows the user to check the
configuration of all controls, keys, and knobs on the radio. This
enables the operator to avoid missing important communications
in the event that a control or switch is set to the wrong position.
RADIO TO RADIO CLONE FEATURE
For quick programming of VX-6000 radios for an emergency
task force, the Clone feature allows copying of all channel
and other configuration data from one VX-6000 to another, OTHER FEATURES:
TALK AROUND BCLO, BTLO, AND TOT FUNCTIONS
using the optional CT-72 Cloning Cable.
•
•
Accessories & Options
MH-25B7A
RMK-4000SH
Remote Kit for
Single Transceiver
Standard
Microphone
MH-53C7A
Heavy Duty
Microphone
MH-53A7A
MH-53B7A
MLS-100
Heavy Duty
Noise Canceling
Microphone
Heavy Duty
Noise Canceling
DTMF Microphone
Mobile Loud Speaker
(12 W Peak Power)
CT-93
Cable for RMK-4000
33 ft (10 m)
RMK-4000DH
2-Tone Decode Unit 5-Tone ENC/DEC Unit
(Requires FIF-7)
(Requires FIF-7)
Remote Kit for
Dual-Head Installations
VTP-50
FVP-25
VX-Trunk Unit
(Requires FIF-7)
Encryption/DTMF Pager
Unit (Requires FIF-7)
FIF-7
CN-6
F5D-14
F2D-8
CT-81
Cable for RMK-4000
20 ft (6 m)
MDC1200
RMK-4000DB
Remote Kit for
Dual Band Installations
CT-82
FVP-35
Digital ANI Encoder Rolling Code Encryption Interface Board for Interface Board for
Unit (Requires FIF-7) Unit (Requires FIF-7) F2D-8,F5D-14,VTP-50,FVP-25 Accessories
Cable for RMK-4000
8 ft (2.5 m)
RMK-4000DBH
CT-83
Remote Kit for Dual Band
plus Dual Head Installations
Cable for RMK-4000
CNT-6000
RF DECK w/ MMB-77
Control Head
RF Deck for Multi Band
Operation
2 ft (0.6 m)
FP-1030A
MMB-79
External Power Supply
(13.8 V, 30 A)
Mobile Mounting
Bracket
CT-70
CT-71
MMB-77
Locking Mobile
Mounting Bracket
CT-72
Radio Programming
Radio to PC
Radio to Radio
Cable (Requires VPL-1) Programming Cable Programming Cable
CE49
Programming
Software
Various accessories listed may not be available in some countries.
Specifications
VX-6000L
VX-6000V
VX-6000U
General Specifications
Frequency Range
29.7-37 MHz (A)
148-174 MHz (C)
450-480 MHz (D)
37-50 MHz (B)
Number of Channels
250 Channels
Channel Spacing
20 kHz
PLL Steps
12.5/25 kHz
5/6.25 kHz
2.5/5/6.25 kHz
13.4 V DC ±15 %
Power Supply Voltage
Current Consumption
LOW
VHF
UHF
TX
22 A
25 A
28 A
RX
2.2 A
2.2 A
2.2 A
STBY
0.6 A
0.6 A
0.6 A
–22° F to +140 ° F (—30° C to +60° C)
Operating Temperature Range
Better than ±5.0 ppm
Frequency Stability
Better than ±2.0 ppm
RF Input-Output Impedance
50 Ohms
Audio Output Impedance
4 Ohms
Dimensions (WHD)
7" x 2.4" x 11.9" (178 x 60 x 301 mm)
Weight
15.4 lb. (6.9 kg)
Receiver Specifications
Measurements made per EIA standard TIA/EIA-603
Circuit Type
Double-conversion Super-heterodyne
0.25 µV
Sensitivity(EIA 12 dB SINAD)
Adjacent Channel Selectivity
85 dB
85 / 80 dB
85 / 77 dB
Intermodulation
80 dB
80 / 75 dB
80 / 75 dB
Spurious and Image Rejection
90 dB
90 dB
90 dB
Audio Output
5 W @ 4 Ohms 3 % THD (10 W @ 4 Ohms 3 % / Optional MLS-100)
Transmitter Specifications
Power Output
Measurements made per EIA standard TIA/EIA-603
120 W/50 W
Modulation
110 W/50 W
16K0F3E
Maximum Deviation
100 W/ 50 W
16K0F3E ,11K0F3E
5 kHz
5.0 / 2.5 kHz
Conducted Spurious Emissions
80 dB Below Carrier
Audio Distortion (@1 kHz)
< 2 % @1kHz
Microphone type
Dynamic
Microphone impedance
600 ohms
Measurements per EIA standards unless noted above. Specifications subject to change without notice or obligation.
Applicable MIL-STD
Standard
Low Pressure
High Temperature
Low Temperature
Temperature Shock
Solar Radiation
Rain*
Humidity
Salt Fog
Dust
Vibration
Shock
MIL 810C Methods/Procedures
501.1/Procedure 1, 2
502.1/Procedure 1
503.1/Procedure 1
505.1/Procedure 1
507.1/Procedure 2
514.2/Procedure 8, 10
516.2/Procedure 1, 5
MIL 810D Methods/Procedures
500.2/Procedure 2
501.2/Procedure 1, 2
502.2/Procedure 1, 2
503.2/Procedure 1
505.2/Procedure 1
506.2/Procedure 1, 2
507.2/Procedure 2
509.2/Procedure 1
510.2/Procedure 1
514.3/Procedure 1 Cat. 10
516.3/Procedure 1, 4
MIL 810E Methods/Procedures
500.3/Procedure 2
501.3/Procedure 1, 2
502.3/Procedure 1, 2
503.3/Procedure 1
505.3/Procedure 1
506.3/Procedure 1, 2
507.3/Procedure 2
509.3/Procedure 1
510.3/Procedure 1
514.4/Procedure 1 Cat. 10
516.4/Procedure 1, 4
Sukagawa Division
Trondule Co., Ltd.
ISO9001 certification
Sukagawa Division
Trondule Co., Ltd.
ISO14001 certification
*Control Head Only
Vertex Standard
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
Phone 714/827-7600; Fax 714/827-8100
http://www.vxstdusa.com
2003.0310NA(U)
B9200392 Printed in Japan
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising