Silencer SR Features Benefits

Silencer SR Features Benefits
Silencer SR is suitable for all Floating laminates, engineered and
hardwood flooring installations. Offers the best support, moisture protection
and sound absorption for your floors.
PRODUCT SPECIFICATIONS
Demand the NALFA Certification Seal. Or roll the dice
on quality. You decide. We say choose the underlayment that is rigorously tested, proven by a third-party
facility and guaranteed to be of the highest quality.
But we don't expect you to take our word for it. That's
why we have the NALFA Certification Seal. The
Certification Seal proves that our underlayment
passed very demanding performance tests. We offer
the industry's best quality laminate underlayment
available. Not because we say so, but because the
NALFA Certification Seal proves it.
The Industry’s Best
Product & Warranty
THE SILENCER SR™
Acoustical Underlayment with Moisture Barrier
• Reduces floor noise by providing excellent sound absorption
• Exceeds Air Quality and Flammability standards
• 100% recyclable and environmentally friendly
• Contains
anti microbial treatment
• Quick and easy installation
(no additional seaming tape needed)
• Eliminates minor subfloor imperfections
• Adds thermal value and suitable for use
with radiant heat flooring
Foam Products Corporation
350 Beamer Road
Calhoun, Georgia 30701
800-526-3626 • fax 706-625-0855
www.foamproducts.com
MADE IN U.S.A.
PRODUCT SPECIFICATIONS
Silencer SR is suitable for all Floating laminates, engineered and hardwood flooring installations.
Offers the best support, moisture protection and sound absorption for your floors.
ADVANTAGES
PACKAGING
• Reduces floor noise by providing excellent sound absorption
• Provides cushioned comfort under laminate and floating
wood floors
• The Silencer SR™ has high density and compression
resistance properties that enable your floor to perform
to its fullest potential and last a lifetime
• The moisture barrier film and tape strip combine to lock
out moisture and allow for quick and easy installation
• Eliminates minor subfloor imperfections
• Contains Ultra-Fresh™ anti-microbial which resists mold,
mildew, and bacteria
• The Silencer SR™ adds insulation value with an R-value
of 2.0
• Suitable for use with radiant heat flooring systems
• 100% recyclable, environmentally friendly, non allergenic
and odorless
• Available in 3' x 33.34' (100 sq. ft.) rolls and
6' x 75' (450 sq. ft.) contractor size rolls
APPROVED SUBSTRATES
• Dry, completely cured concrete
(at least 14 days old with HVAC operating)
• ¾" interior plywood or OSB flooring
• Waterproofing and crack-isolation membranes
• Cement backer units
FLOOR PREPARATION
• Subfloor should be clean and dry
• In geographic areas where concrete subfloors are subject
to excessive moisture, a calcium chloride moisture test is
required. Vapor emission readings in excess of 4 lbs. per
1,000 square feet in 24 hrs will require additional protection
such as concrete sealant or polyethylene sheeting.
INSTALLATION
Quick and easy installation* –
requires no additional seaming tape, cuts with a knife
1. Install The Silencer SR™ with film down against
concrete/subfloor
2. Roll out underlayment with tape strip next to wall.
Roll out next row in same manner butting underlayment
close to first row ( do not overlap ) and covering the
moisture barrier film. Remove the tape strip and secure
the overlapping moisture barrier film.
3. Install flooring according to the manufacturer's
installation instructions
*NOT for glue down installations
TECHNICAL DATA
100% Synthetic SBR Rubber foam underlayment
with attached polypropylene film
Thickness............................................................................. 085"
Density ............................................................................ 16 LBS
Weight .................................................................... 2.24 oz/sq.ft.
Moisture Barrier ............................with lip and tape sealing system
Antimicrobial Treatment ....................................... ULTRA-FRESH™
Thermal Resistance.................................................... R-Value 2.0
Compression Resistance @ 25% ...................................... 8.6 psi
Compression Set @ 25%................................................. 10.3 %
Flammability Rating ................................................Passes Federal
Flammability Standards DOC-FF-1-70
Smoke Density .....................................................Passes, 85 max
Product Emissions.....................................Exceeds VOC emissions
requirements, environmentally friendly
SOUND ABSORPTION PROPERTIES
Impact Insulation Class (IIC) This method is to measure
the impact sound transmission performance of a floor-ceiling
assembly (sound transmission through the floor)
IIC
70
59
Flooring
Laminate
Hardwood
Sub-Floor
6" concrete with ceiling assembly
6" concrete with ceiling assembly
Sound Transmission Class (STC) This method is to measure
the air-borne sound insolating property of a partition element
for effectiveness in blocking sound
STC
71
53
Flooring
Laminate
Hardwood
Sub-Floor
6" concrete with ceiling assembly
6" concrete with ceiling assembly
Delta IIC The db rating
difference between a floor
measured with an underlayment
and with no underlayment
Δ IIC
22
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising