[33] [TIM] Front Suspension

[33] [TIM] Front Suspension
33-1
GROUP 33
FRONT
SUSPENSION
CONTENTS
GENERAL INFORMATION . . . . . . . .
33-2
33-2
FRONT SUSPENSION
GENERAL INFORMATION
GENERAL INFORMATION
The MacPherson strut type suspension is adopted.
.
MAIN FEATURES
• The wheel tread is increased to improve cornering ability.
• The roll center height is modified to improve the
steering ability.
• Increased suspension stroke improves road holding quality, and secures good adhesion even on
bumpy-rough roads to reduce shocks received
when the vehicle negotiates bumps.
M2330000100965
• The fully flattened crossmember improves the
left/right direction rigidity of installation points of
the lower arms for high steering ability.
• Tuning of the lower arm bushes improves the
steering ability and riding comfort.
• The stabilizer bar is joined to the strut for high
efficiency to secure the optimum rolling rigidity,
and improves the steering ability.
• Total tuning of struts, springs, and bump rubbers
improves the steering ability and riding comfort.
CONSTRUCTION DIAGRAM
Coil spring
Stabilizer link
Stabilizer bar
Front suspension strut
Lower arm
Front axle crossmember
AC607283 AB
SPECIFICATIONS
.
SUSPENSION SYSTEM
Item
Specification
Suspension type
MacPherson strut with coil spring
.
WHEEL ALIGNMENT
Item
Specification
Camber
−0° 05'
33-3
FRONT SUSPENSION
GENERAL INFORMATION
Item
Specification
Caster
2° 40'
Kingpin inclination
13° 30'
Toe-in mm (in)
1 (0.04)
.
COIL SPRING
Item
Specification
DE, ES
Wire diameter mm (in)
14 (0.6)
Average outside diameter mm (in)
159 (6.3)
Free length mm (in)
GTS
5MT
331 (13.0)
316 (12.4)
CVT
338 (13.3)
322 (12.7)
NOTES
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising