INSTRUCTIONS FOR INSTALLATION AND OPERATION MODEL GENERAL

INSTRUCTIONS FOR INSTALLATION AND OPERATION MODEL GENERAL
~7VICON
INSTRUCTIONS FOR
INSTALLATION AND OPERATION
MODEL VllOAWM DESIGNER LIGHT-DUTY INDOOR WALL MOUNT
GENERAL
SCOPE
The information in this instruction manual
covers the installation of Model VI 1OAWM
Designer Light-Duty Indoor Wall Mount.
INTRODUCTION
Model VllOAWM Designer Light-Duty Indoor Wall
Mount, part of the ArchiTech line of mounting
hardware, is designed to support camera/
housing combinations weighing up to 20 pounds
(9.1 kg). This indoor mount includes Model
VlOAH Adjustable Head that allows for full
360-degree rotation and varying tilt angles.
VllOAWM WALL MOUNT WITH
VlOAH ADJUSTABLE HEAD
INSTALLATION
This wall mount should be secured to studs or
beams rather than directly to plaster or
gypsum wallboard. If the mount is to be
attached to a blind structure such as concrete
block, use masonry screws with plugs or other
appropriate hardware. Use steel fasteners in
all installations. (Never use screws in the
end grain of wood.)
To install the die-cast aluminum VllOAWM Wall
Mount, secure the base to the wall with two
l/4-inch screws. See Figure 1.
MAINTENANCE
Model VllOAWM Designer Light-Duty Indoor Wall
Mount requires no maintenance.
Figure 1
VllOAWM Outline Drawing
Vicon part number 8006-8603-00-00
Product speciflcatmns subject to change without notlce
VICON INDUSTRIES INC.
525 BROAD HOLLOW ROAD, MELVILLE, N.Y. 1 1 7 4 7 T E L : (516) 2 9 3 - 2 2 0 0 T E L E X : 1 4 4 5 8 1
TOLL FREE: 600-645-9116
(OUTSIDE OF NEW YORK)
SHIPPING
You must have a Return Authorization (RA) number to
return a unit to Vicon.
If a unit must be returned to the factory:
1. Obtain RA number from one of the following
locations:
VICON INDUSTRIES INC.
525 Broad Hollow Road
Melville, New York 1 1 7 4 7
516-293-2200
600-645-9116
I
VICON INDUSTRIES INC.
Western Regional Office
950 West Central Ave., Unit D
Brea,
California 92621
714-990-3959
600-646-1932133
Copyright
2
1988
Vicon
Industries
INSTRUCTIONS
2. Include the RA number, the name of the person who
issued the number, and your company’s name and
address with your returned unit. The Vicon RA number
MUST appear on any correspondence concerning the
unit being shipped.
3. Include a brief description of the installation.
VICON INDUSTRIES INC.
Southeastern Regional Office
3010 Business Park Dr., Ste. 6
Norcross, Georgia 30071
404-449-0499
600-624-6479
4. Fully describe the problem and the circumstances under
which it occurs.
VICON INDUSTRIES (U.K.1
LTD.
Gunstore R o a d
Hilsea, Portsmouth
Hampshire PO35JP,
England
10705)
665312
7. Pack the unit carefully, using the original shipping
Inc.
All
Rights
5. Indicate the unit’s original date of purchase.
6. Attach all the above information to the unit.
rnrtnn
nr ..itn -~
nnllivnl6nt,
--.
.-.. -.
_..I..
for maximum
protection.
8. Mark the RA number on the outside of the carton,
preferably on the shipping label.
Reserved.
5603-988~
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising