ClearLink Power Dividers 50 Watts General Information

ClearLink Power Dividers 50 Watts General Information
ClearLink® Power Dividers
50 Watts
General Information
Our low power - low PIM dividers are offered with N
connectors and will handle 50 watts of power. These are
ideal for in-building applications that require the dividing of
RF to accommodate multiple antenna locations.
Model Numbers
• ClearLink-SPD2/698-2.7K-LP/N
• ClearLink-SPD3/698-2.7K-LP/N
• ClearLink-SPD4/698-2.7K-LP/N
Frequency Range
• 698-2700 MHz
Features & Benefits
Specifications
• Guaranteed PIM Compliance
Channel
2
3
4
• Available in 2, 3 or 4 Channels
Isolation (dB)
≥20
≥20
≥20
• Low Insertion Loss
Insertion Loss (dB)
≤0.4
≤0.6
≤0.6
Total Loss (dB)
3.0
4.8
6.0
VSWR (:1)
≤1.20
≤1.25
≤1.30
PIM Rating (typ)* (dBc)
-153
-153
-153
• Low VSWR
• Indoor/Outdoor Use
• IP65 Compliant
• RoHS Compliant
Dimensions
2 Way
4.2 x 3.1 x 0.9 in
3 Way
5.3 x 4.4 x 0.9 in
4 Way
4.2 x 3.1 x 0.9 in
Power Rating (Watts)
Type N Female Connectors
50
Operating Temperature
-25° C to +75° C
Specifications subject to change without notice.
*ClearLink® PIM certified passive devices are guaranteed to ≤ -150 dBc
with typical results at -153 dBc. ClearLink® devices are measured with
two tones at +43 dBm.
Copyright © 2015 by Westell, Inc. All Rights Reserved. Westell, ClearLink, Kentrox, and Optima
Management System are registered trademarks of Westell, Inc. All other names are trademarks of their
respective owners. Information is correct at time of printing and is subject to change without notice.
Westell, Inc. is an Equal Opportunity/Affirmative Action employer.
W E S TELL .CO M
030-200211 rB 3/27/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising