Defy GEMINI PETIT CHEF MULTIFUNCTION THERMOFAN Owner`s manual

Defy GEMINI PETIT CHEF MULTIFUNCTION THERMOFAN Owner`s manual
Owner’s
Manual
GEMINI PETIT CHEF MULTIFUNCTION
THERMOFAN
EYE LEVEL OVEN
CONTENTS
2
2
2
2
3
3
4
4
6
9
10
10
10
www.defy.co.za
Introduction
Unpacking
Cupboard Design
Safety Advice
Installation
Electrical Installation
The Control Panel
Automatic Oven Timer / Clock
Multi Function Oven (5 Functions)
Maintenance
Problem Check
Owner’s Responsibility
Service
INTRODUCTION
Congratulations on the purchase of this quality appliance.
We, the manufacturer, trust that you will enjoy many years of trouble free use. Please
read these instructions carefully before using the oven. This book will provide you with
information on how to operate and care for your appliance in order that you gain the
maximum benefit from it.
UNPACKING
•
•
•
Please ensure that packaging material is disposed of in a responsible manner. Plastic
bags should be cut up to prevent children playing with them and accidentally
suffocating.
Remove all packing from the oven cavity and position the accessories.
If the appliance is damaged in any way, do not use it. Report the damage to your
dealer, who will take the necessary corrective action.
CUPBOARD DESIGN
•
•
•
•
•
Cooking appliances generate considerable heat. The layout and materials of the
mounting cabinet should take account of the characteristics of the oven.
Surfaces immediately adjacent to the oven should be able to withstand temperatures
of up to 100 C without delaminating or discolouring.
Gemini ovens exhaust through a vent in the upper part of the handle. The vent at the
bottom of the handle is an air intake.
Gemini ovens are designed for installation with cupboard doors which provide at least
100mm. clearance alongside and above the oven. Overhead doors may be subjected to
heat as well as condensation if moist foods are being cooked.
Note that the oven doors are reversible and may hinge from the left or right. Consult
the nearest Defy Service Centre and they will advise the correct procedure.
SAFETY ADVICE
•
•
•
•
•
•
•
•
Only use the appliance for preparing food.
Always keep children away from the appliance when it is in use.
Do not leave hot fat or oil unattended. If overheating occurs, these could catch fire.
Switch off the power at the mains in the event of a fault or when cleaning the oven.
Do not store flammable items in the oven. If the oven is inadvertently switched on,
these could catch fire.
Never cover the bottom oven element with aluminium foil. Cooking times will be
affected and the oven enamel could be damaged.
Avoid spilling fruit juice, particularly citrus, on the appliance as it could damage the
enamel.
Always keep the oven door gasket clean as this will enable the door to seal properly.
INSTALLATION
_3
60 +
0
32 MIN
Aperture
665 H x 700 W x 580 D
_3
665 +
0
Aperture
_3
700 +
0
Aperture
32
MIN
_3
900 +
0
Typical section showing
ventilation requirements
Above floor
level
Floor
•
•
•
•
Support the oven in front of the aperture and make the electrical connection before
installing. This will ensure enough cable length for subsequent servicing.
Lift off the top trim and unscrew the bottom trim. This will expose the fixing holes.
Secure the oven to the cabinet using suitable screws. (Fasteners are not provided.)
Replace the top and bottom trims.
ELECTRICAL INSTALLATION
“This appliance must be earthed and the manufacturer and the seller do
not accept responsibility for any damage due to incorrect installation or
electrical connection.”
Earth leakage
This appliance should not be connected through an earth leakage system.
Refer to S.A.B.S. 0147.
Connection to the power supply must be carried out by a licensed electrician, who will
ensure that the oven is correctly connected and safely earthed. The rated current is printed
on the serial number label attached to the oven bottom trim.
The appliance must be connected to the mains through a double pole isolating switch
which has a minimum clearance between the contacts of 3 mm. in both poles.
A means for disconnection must be provided in the fixed wiring.
THE CONTROL PANEL
MULTIFUNCTION
SELECTOR
AUTOMATIC
OVEN TIMER
AND CLOCK
OVEN THERMOSTAT
AND INDICATOR
LIGHT
VARIABLE
GRILL
THE OVEN THERMOSTAT IS MARKED DOWN TO 70°C.
WHEN SET TO THIS POSITION, THE OVEN MAY BE USED AS A WARMER
AUTOMATIC OVEN TIMER / CLOCK
BUTTON FUNCTIONS
1 = MINUTE MINDER
2 = COOKING PERIOD
3 = STOP TIME
4 = MANUAL CONTROL
5 = SUBTRACT
6 = ADD
- +
1
2
3
4
5
6
SETTING THE TIME OF DAY
•
•
•
•
•
•
When the power is first connected (or after a power failure), the clock display will
flash 00.00.
To set the clock, press buttons 1 and 2 and hold them down.
Press buttons 5 or 6 until the correct time of day is displayed.
Release the buttons. The clock is now set.
Please note that the clock has a 24 hour display.
For example 3.00 PM will be displayed as 15.00.
MINUTE MINDER
•
•
•
•
•
•
Suppose that you wish to time the boiling of a 5 minute egg.
First boil the water
Press and hold button 1. The display will show 00.00
Press button 6 until the display shows 00.05
Release the buttons and place the egg in the boiling water. The display will again
show the time of day.
After 5 minutes the timer will emit an electronic tone which lasts for about one
minute (2 beeps every 2 seconds). To cancel the tone, press any of the buttons.
Note:
• During the operation of the minute minder, the
remaining time may be displayed by pushing
button 1
• The minute minder can be used simultaneously
and independent of any automatic control
program
• The display will always revert to the time of
day after any program has been set.
- +
1
2
3
4
5
6
SWITCHING THE OVEN ON AND OFF AUTOMATICALLY
(AUTOBAKE)
Autobake is intended for dishes such as roasts and casseroles. These are not affected by a
waiting period in a cold oven.
• Prepare your meal and place it in the oven.
• Set the cooking period required by pressing buttons 2 and 6 until the desired period is
displayed.
• Set the stop time by pushing buttons 3 and 6 until the desired stop time is displayed.
• Release the buttons and the clock will again display the time of day.
• The word AUTO will light up on the clock display.
• Set the multi function selector where applicable to the desired cooking function.
• Now set the oven thermostat to the desired temperature setting
The automatic control will automatically switch the oven on and the
symbol will
light up in the clock display.
Cooking will commence at the selected temperature and for the selected cooking period.
The oven will automatically switch off at the selected stop time and emit an electronic
tone for about one minute (4 beeps every 2 seconds). To cancel the tone, press any of the
buttons.
• The word AUTO will flash until button 4 is pressed and manual control is restored.
• Return the multi function selector to the OFF position
• The oven thermostat must be turned to the OFF position in an anticlockwise
direction.
Example:
Suppose the time of day is now 13h00. The food needs to be cooked for 2 hours at
180°C and it should be ready to serve at 18h00. Here’s what to do.
• Ensure the clock is set to the correct time of day, 13.00.
• Press buttons 2 and 6 until 02.00 is displayed
• Press buttons 3 and 6 until 18.00 is displayed.
or
• Set the oven thermostat to 180°C and the multi function selector to
Hint:
It is not advisable to use the Autobake function for cooking periods that are less
than 60 minutes.
SWITCHING THE OVEN OFF AUTOMATICALLY
Suppose you have to go out and you will not be back
in time to switch off a meal already cooking in the
oven and requiring another 40 minutes before it is
done. Proceed as follows:
• Press and hold button 2. The clock will display
00.00.
• Press button 6 until the clock displays 00.40.
1
2
3
4
5
6
• Release the buttons and the clock will again
display the time of day.
• The word AUTO and
will light up in the display.
• After 40 minutes the oven will switch off automatically and emit an electronic tone
for about one minute. (4 beeps every 3 seconds)
• To cancel the tone, press any of the buttons.
• The word AUTO will flash until button 4 is pressed and manual control is restored.
• Return the multi function selector to OFF
• The oven thermostat must be turned to the OFF position in an anticlockwise
direction.
- +
Important
If the Automatic start and or stop functions are not required, the clock must be set to
manual mode. Unless this is done, the oven will not work.
Press button 4
MULTI FUNCTION OVEN
The Defy multifunction oven allows a choice of 5 distinctly different cooking
modes.
1 FAN ONLY (DEFROSTING) OPERATION
Ensure that the timer is set to manual. (Press button 4.)
Set the multi function knob to fan only. In this mode the fan at the back of the oven
will circulate air at room temperature, substantially reducing the defrosting period
required for frozen food placed in the oven.
• After defrosting is complete, the multi function knob must be turned to 0.
•
•
2 THERMOFAN COOKING OPERATION
Thermofan cooking differs from conventional cooking in that it uses the principle of
forced convection within the oven. The advantages are:
1. Both trays can be used at the same time.
2. Different dishes can be cooked simultaneously without flavour or aroma transfer.
Hence fish, meat and cakes can be baked at the same time.
3. The oven door may be opened at any time for inspection purposes without risk.
4. Spit-roast chickens may be done without using a rotisserie.
5. Cooking is done at slightly lower temperatures (10°C TO 20°C)
Cooking
5
RECOMMENDED
• Ensure that the timer is set to manual. (Press button 4)
4
• Set the multi function knob to Thermofan cooking.
3
TRAY POSITIONS
2
• Set the oven thermostat to the required temperature.
1
• The indicator light will glow and remain on until the oven
has reached the selected temperature. When the indicator
light switches off, the food should be placed in the oven. During cooking the indicator
light will cycle on and off as the oven thermostat maintains the selected temperature
• After completion, the thermostat and multi function knob must be returned to 0.
Baking guide
• Thermofan baking is done with the oven trays in position on top of the wire shelves.
Unused trays must be kept in position to facilitate proper airflow.
• For small items the entire area of each tray may be utilised. Larger items should be
placed towards the front of each tray.
• All ovens extract a certain amount of moisture from the food being cooked. The much
greater capacity of the Thermofan oven allows more food to be cooked and thus more
moisture may be released. This is normal and not detrimental to the food or the oven.
• For professional results and perfect browning, open the oven door when half the
baking time has lapsed. Then turn the baking tins around so that the sides previously
facing the back of the oven now face the front.
•
Caution: Thermofan baking relies on good contact between the bottom of the
cake tin and the oven tray. Do not use spring form baking tins with a raised
bottom. The lack of contact will cause the bottom of the cake to be underdone.
These tins may be used on a wire shelf where no insulating air space is created.
3 CONVENTIONAL BAKE
Ensure that the timer is set to manual and set the multi function knob to conventional
bake.
• Set the oven thermostat to the required temperature. The indicator light will glow and
remain on until the oven has reached the selected temperature.
• When the indicator light switches off, the food should be placed in the oven.
• During cooking the indicator light will cycle on and off as the oven thermostat
maintains the selected temperature
• After completion return the multi function selector and oven thermostat to OFF in
an anti clockwise direction.
Baking guide
5
• Where possible, bake on the middle shelf position (3) in
RECOMMENDED
BAKE POSITION
4
the oven.
3
•
Do not use the baking trays as these are exclusively used
2
for Thermofan baking
1
• Place the food halfway between the back of the oven and
the door.
• Do not open the oven door until at least two thirds of the baking time has lapsed.
4 CONVENTIONAL GRILL
•
•
•
•
•
•
•
•
•
•
The oven door must remain partially open (about 50 mm)
Use only a wire shelf when grilling as the intense heat
could warp baking trays.
5
Ensure that the timer is set to manual mode.
RECOMMENDED
4
GRILL POSITION
Turn the multi function knob to conventional grill.
3
2
Set the oven thermostat to the grill position.
1
Pre-heat the roast pan and broiler for 5 minutes under the
grill element to help seal the meat.
Place the food on the roast pan and place this on a wire shelf near to the grill element.
Monitor the grilling process to avoid burning the food.
Care must be taken not to touch the grill element while handling food in the oven.
After completion return the multi function selector and oven thermostat to OFF in
an anti clockwise direction.
WARNING: ACCESSIBLE PARTS MAY BECOME HOT WHEN GRILLING.
TAKE CARE NOT TO TOUCH THESE PARTS AND KEEP CHILDREN AWAY.
5 TURBO GRILL
• The oven door must remain closed when turbo grilling.
• Turbo grilling is most suitable for meat, as drying out and shrinkage will be reduced
• Turn the selector knob to Turbo Grill.
• Operating instructions are otherwise the same as those for conventional grilling as
detailed above.
MAINTENANCE
Cleaning the oven
• Switch off the power at the wall switch, open the oven
door and allow the oven to cool down.
• Remove the oven shelves, side racks, broiler, roast pan,
element guard and baking trays. Wash in soapy water,
rinse dry and replace.
• Clean the oven with a hot soapy cloth.
• It may be necessary to soak burnt soils with a liquid
cleaner to soften them before scrubbing them with a
nylon brush or scouring sponge.
• Heavy soils on the bottom of the oven may require
overnight soaking under a sponge liberally sprinkled
with household ammonia. The soil can then be removed
the following morning by washing normally.
• Do not use metal objects or steel wool to clean the oven.
• After cleaning, fit the bottom element into the element
guard hooks. Failure to observe this precaution would
allow the element to rest on and possibly damage the
oven enamel.
• Restore the power and re-set the timer. (see page 4)
To remove the side racks,
lift and pull out the front,
slide the rack forwards
and lift free.
Fit in reverse order
General cleaning.
• Switch the power off at the wall switch.
• Wipe down glass panels, cabinet, door, control knobs, trims and handles with a hot
soapy cloth.
• Use only liquid household cleaners and avoid abrasive powders, scouring pads and
caustic cleaners.
• Rinse and wipe down with a clean cloth.
• Restore the power and re-set the timer. (see page 4)
The oven light.
The oven light is switched on by the multi function knob.
(1st position on the dial) and switches off when the multi function knob is returned to 0.
To replace a faulty light bulb, proceed as follows.
• Switch off the power at the wall switch.
• Remove the light cover by unscrewing it in an anti-clockwise direction.
• Unscrew the faulty bulb and fit a new 40 watt bulb rated for 300°C.
• Refit the light cover.
• Restore the power and re-set the timer (see page 4).
PROBLEM CHECK
Before calling a service technician to assist with a problem,
PLEASE CHECK THE FOLLOWING
THE MAINS DISTRIBUTION BOARD
THE WALL SWITCH
SET THE TIMER TO MANUAL
Remember that you may be charged for a service call even during the warranty period if
the fault is due to or caused by any of the above.
OWNER’S RESPONSIBILITY
Since the following are not factory faults, they are the owner’s responsibility.
• Damage to exterior finish.
• Breakage of glass and other components.
• Replacement of the light bulb.
• Damage through improper use or installation of the appliance.
• Damage caused by moving the appliance.
SERVICE
If you have followed the instructions and still have a problem, contact the nearest Defy
Service Centre. They will be able to advise you on any aspect of the machine or send a
qualified technician to repair it.
The Manufacturer strives for continuous improvements. For this reason, the text and
illustrations in this book are subject to change without notice.
Part Number 062 871
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement