Luxul XAP-1210 Quick Install
Simply Connected
Quick Install Guide
XAP-1210
High Power Wireless 300N
Low Profile Access Point
Use the XAP-1210 to:
„
Deliver Broader Wi-Fi Coverage and Eliminate
Client Device Roaming Issues with Fewer APs
„
Improve Data Rates with Multi-Stream Wireless
802.11n Technology
„
Optimize VoIP, Streaming Media and Other
Demanding Applications
„
Create a Secure Guest Network
„
Simplify Wi-Fi Installation while Minimizing
Setup Time and Costs
XAP-1210
Quick Install Guide
Quick Install Guide
Model Number: XAP-1210
High Power Wireless 300N Low Profile Access Point
FCC ID: W59XAP1210
IC: 8584A-XAP1210
© 2014 Luxul. All Rights Reserved.
No part of this publication may be modified or adapted in any way, for any
purposes without permission in writing from Luxul. The material in this manual
is subject to change without notice. Luxul reserves the right to make changes to
any product to improve reliability, function, or design. No license is granted, either
expressly or by implication or otherwise under any Luxul intellectual property rights.
An implied license only exists for equipment, circuits and subsystems contained in
this or any Luxul product.
DOCUMENT CONVENTIONS
These graphical alerts are used in this document to indicate notable situations:
NOTE: Tips, hints, or special requirements that you should take note of.
CAUTION: Care is required. Disregarding a caution can result in data
loss or equipment malfunction.
WARNING!: Indicates a condition or procedure that could result in
personal injury or equipment damage.
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CONTACT LUXUL
Sales
Technical Support
P: 801-822-5450
E: sales@luxul.com
P: 801-822-5450
E: support@luxul.com
2
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-XAP-1210 0825140913
Simply Connected
PACKAGE CONTENTS
The following items should be included in the box:
„
One: XAP-1210 Wireless AP
„
One: Mounting Bracket and Hardware
„
One: PoE Injector and Power Cord
„
Two: Ethernet Cables
„
One: Quick Install Guide
NOTE: If any of the listed items are missing or damaged, please contact
the reseller from whom you purchased for return/replacement.
HARDWARE DESCRIPTION
XAP-1210 LED
XAP-1210 front LED
XAP-1210 LED Indicators
Name
Status
Function
Power
On
The XAP-1210 is powered and working properly.
Off
The XAP-1210 is not receiving power or the LED has been
turned off in the APs software interface.
Blinking
The XAP-1210 is booting up.
XAP-1210 Rear Ports
XAP-1210 Rear Ethernet port
XAP-1210 Rear Power port
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
3
XAP-1210
Quick Install Guide
PoE Injector LED Indicators
Name
Status
Function
PWR
On
Power is connected to the injector
Off
Injector is not receiving power
PREPARING FOR INSTALLATION
System and Power Requirements
„
Computer with supported Web browser. Minimum supported web browser versions include: I.E. 9.0, Firefox 2.5, Safari 5.0, Chrome 3.0 and up. The Web browser
is used to configure the XAP-1210.
„
The POE injector power supply requires AC100V ~ 240V, 50Hz ~ 60Hz.
XAP-1210 INSTALLATION
Access Point Placement
The XAP-1210 high powered access point is designed for optimal performance as
well as for simple and efficient installation and setup. It designed for mounting on
the ceiling, wall or placed on a desktop or other flat surface. Because the signal
generated by the XAP-1210 is omnidirectional, the unit should be mounted on a
ceiling or wall directly in the center of the desired coverage area.
XAP-1210 Coverage Pattern
Ceiling and Wall Mounting
The XAP-1210 comes with a square mounting bracket to mount it to the wall or
ceiling. Use the Mounting Pattern (Page 6-7) for mounting bracket alignment.
4
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-XAP-1210 0825140913
Simply Connected
XAP-1210 mounted on a ceiling
XAP-1210 mounted on a wall
Desktop Installation
Place on any flat surface
XAP-1210 on a desktop or flat surface
Connecting the Ethernet Cable
With the XAP-1210 properly mounted, you can now plug the Ethernet Cable into
the RJ-45 connector.
NOTE: Category-5, super Category-5 or Category-6 unshielded twisted
pair (CAT5/CAT5e/CAT6 UTP) cables can be used. For best
results, it is recommended that Category-6 shielded twisted pair
be used to ensure stable data transmission at highest data rates.
Connecting to the Power Source
The XAP-1210 is PoE ready and supports 802.3at PoE. A PoE injector is included
with the device. To apply power, simply connect the opposite end of the Ethernet
cable to which the access point is already connected to the provided PoE injector
or other PoE switch or injector. An Ethernet cable length of up to 300 feet can be
used. DO NOT yet apply power to the PoE injector or switch.
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
5
MOUNTING PATTERN
XAP-1210
Quick Install Guide
PoE Injector Setup
„„
Data In: Connect an Ethernet cable from your router or switch
to the Data In port of the included PoE Injector
„„
Data & PWR Out: Connect an Ethernet cable from the Data & PWR Out
port of the included PoE Injector to the PoE Port of the XAP-1210
„„
AC Power: Connect the included AC Cord to the Power Input of the Included
Injector first and then to the AC outlet.
NOTE: T
he XAP-1210 is not a router and will need to be connected to
a network with a router in order to deliver Internet access.
From your
Router or Switch
POE
Injector
Power
Source
DATA IN
DATA &
PWR OUT
XAP-1210
The PoE Injector combines power and data to the XAP-1210
CAUTION: Because the XAP-1210 is a High-Powered access point it is
normal for it to be warm to the touch
NOTE: The XAP-1210 is designed to work with any 802.3at power
source.
NOTE: The XAP-1210 can also be powered by direct AC power. Contact
Luxul to purchase an AC Power Adapter.
8
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-XAP-1210 0825140913
Simply Connected
CONFIGURATION
Default IP Address
The XAP-1210 is not equipped with an internal DHCP server. If connected to a Luxul
Router, configuration will be automatic. Otherwise, the IP address of the computer
for login and configuration will need to be manually configured. The table below
lists the default parameters of the XAP-1210.
Parameter: Default Value
Default IP address: 192.168.0.10
Default user name: admin
Default password: admin
The Luxul XAP-1210 default IP addresss is 192.168.0.10. If the IP address of your router
is not set to the 192.168.0.X network, a temporary static IP address must be set on
the computer being used for configuration. To do so, set the IP address of the computer to the 192.168.0.X range and then use the default IP address of your XAP-1210
as the Gateway/Router. Once configured, set the computer IP configuration back
to “Obtain Automatically/DHCP.”
NOTE: Go to http://luxul.com/how-to-videos for videos about
changing the IP address of your Operating System.
Connect a Client Device
„„
Connecting a Wireless Client Device: Connect the client device to the XAP-1210
default wireless network Luxul1210. Wireless network will run in Open Security
mode. A passphrase is not required until Wireless Security is configured.
„„
Connecting an Ethernet Device: Use Ethernet cable to connect your computer
or device to one of the XAP-1210 LAN ports.
Login
Login to the XAP-1210 with the following steps:
1. Open a Web browser, and enter 192.168.0.10. The access point login screen
will appear.
2.Enter the user name and password (default user name and default password
are both set as “admin”), and then click “OK” to login to the access point
configuration interface.
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
9
XAP-1210
Quick Install Guide
ADVANCED SETTINGS
For advanced settings information go to luxul.com
WARNINGS AND SAFETY INFORMATION
„„
Verify that the electrical circuits have appropriate grounding and overload protection.
„„
Attach only approved power cords to the device.
„„
Verify there is adequate ventilation around the device, and that ambient temperatures meet
equipment operation specifications.
„„
The XAP-1210 is designed for indoor use only. DO NOT place this outdoors.
„„
DO NOT install in or near hot or humid places, such as a kitchen or bathroom. Take care to
minimize exposure to excessive heat or moisture.
„„
Small parts and plastic bags used for packaging may be harmful to small children. KEEP All
ACCESSORIES OUT OF THE REACH OF CHILDREN!
„„
The XAP-1210 may become hot when in use for extended time periods. This is normal and is not a
malfunction. DO NOT install where it will be exposed to paper, cloth or other flammable materials.
REGULATORY COMPLIANCE
The device complies with internationally recognized standards covering human exposure to electromagnetic fields from radio devices. This equipment also complies with FCC radiation exposure
set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC
radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm (8
inches) during normal operation.
Unauthorized antennas, modifications, or attachments could cause damage and may violate regulatory approvals. Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate the equipment.
The equipment version marketed in the U.S. is restricted to usage of channels 1-11 only.
Health and Safety Recommendations
Warnings for the use of Wireless Devices: Please observe all warning notices with regard to the
usage of wireless devices
Potentially Hazardous Atmospheres: You are reminded of the need to observe restrictions on the
use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals
or particles (such as grain, dust, or metal powders).
Safety in Hospitals: Wireless devices transmit radio frequency energy and may affect medical
electrical equipment. When installed adjacent to other equipment, it is advised to verify that the
adjacent equipment is not adversely affected.
RF Exposure Guidelines
Safety Information: The device complies with internationally recognized standards covering
human exposure to electromagnetic fields from radio devices.
10
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-QIG-XAP-1210 0825140913
Simply Connected
Warning: Exposure to Radio Frequency (RF) Radiation:
The radiated output of this device is below the FCC radio frequency exposure limits. Nevertheless,
the device should be used in such a manner that the potential for human contact during normal
operation is minimized.
„„
The end user must avoid any extended human RF exposure directly in front
of the device, up to a distance of 20cm, when unit is on.
„„
When servicing the equipment and selecting a location for the antennas, it is important to note
that a minimum distance of 20cm is required between personnel and the device or antenna to
comply with the radio frequency exposure limit.
„„
The antenna used for this transmitter must be installed to provide a separation distance of at
least 20cm from all persons and must not be co-located or operating in conjunction with any
other antenna or transmitter.
The following safety precautions should be observed:
„„
Do not touch or move the antenna while the unit is transmitting or receiving.
„„
Do not hold any component containing the radio such that the antenna is very close or touching
any exposed parts of the body, especially the face or eyes, while transmitting.
„„
Do not operate the radio or attempt to transmit data unless the antenna is connected; this
behavior may cause damage to the radio.
FCC Statement—Wireless FCC 2.4GHz 802.11bgn
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the following measures:
„„
Reorient or relocate the receiving antenna.
„„
Increase the separation between the equipment and receiver.
„„
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
„„
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
11
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the
radiator and your body.
NOTE: (1)The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment.(2) To avoid unnecessary
radiation interference, it is recommended to use a shielded RJ45 cable
Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020, declares that
this Luxul XAP-1500 is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
For a copy of this report send a self addressed stamped envelope to:
Luxul CE, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020.
Industry Canada (RSS-Gen Issue 2)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2)this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareilsradio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes : (1)l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
Le dispositif rencontre l’exemption des limites courantes d’évaluation dans la section 2.5 de RSS 102 et la
conformité à l’exposition de RSS-102 rf, utilisateurs peut obtenir l’information canadienne sur l’exposition
et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu’aucune autre antenne
ou émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20
centimètres entre le radiateur et votre corps.
CAN ICES-03(B)/NMB-3(B)
Information on this document supersedes all previous versions. Products and documents
subject to change without notice. Products may be discontinued without notice.
LUX-QIG-XAP-1210
0825140913
14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685
luxul.com | 801-822-5450
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising