ENN7483 D
Ordering number : EN7483A
12A02MH
Bipolar Transistor
http://onsemi.com
–12V, –1A, Low VCE(sat) PNP Single MCPH3
Applications
•
Low-frequency Amplifier, high-speed switching, small motor drive, muting circuit
Features
•
•
•
Large current capacity
Low collector-to-emitter saturation voltage (resistance) RCE (sat) typ.=285mΩ [IC=1A, IB=50mA]
Small ON-resistance (Ron)
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Symbol
Collector-to-Base Voltage
Conditions
Ratings
VCBO
VCEO
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
VEBO
IC
ICP
Collector Current
Collector Current (Pulse)
Collector Dissipation
Junction Temperature
PC
Tj
Storage Temperature
Tstg
When mounted on ceramic substrate (600mm2×0.8mm)
Unit
--15
V
--12
V
--5
V
--1
A
--2
A
600
mW
150
°C
--55 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Package Dimensions
Product & Package Information
unit : mm (typ)
7019A-004
• Package
: MCPH3
• JEITA, JEDEC
: SC-70, SOT-323
• Minimum Packing Quantity : 3,000 pcs./reel
0.25
12A02MH-TL-E
0.15
2.0
Packing Type : TL
1.6
2.1
0 to 0.02
AK
LOT No.
LOT No.
3
Marking
0.65
2
Electrical Connection
0.3
3
0.07
0.85
0.25
TL
1
1 : Base
2 : Emitter
3 : Collector
MCPH3
Semiconductor Components Industries, LLC, 2013
August, 2013
1
2
90512 TKIM/O2203 TSIM TA-100608 No.7483-1/6
12A02MH
Electrical Characteristics at Ta=25°C
Parameter
Symbol
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Output Capacitance
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
Collector-to-Base Breakdown Voltage
Collector-to-Emitter Breakdown Voltage
Emitter-to-Base Breakdown Voltage
Turn-ON Time
Storage Time
Fall Time
Ratings
Conditions
min
typ
Unit
max
ICBO
IEBO
hFE
VCB= --12V, IE=0A
VEB= --4V, IC=0A
VCE= --2V, IC= --10mA
fT
Cob
VCE= --2V, IC= --50mA
VCB= --10V, f=1MHz
VCE(sat)
VBE(sat)
IC= --400mA, IB= --20mA
IC= --400mA, IB= --20mA
V(BR)CBO
V(BR)CEO
IC= --10μA, IE=0A
IC= --1mA, RBE=∞
--15
--12
V
V(BR)EBO
ton
IE= --10μA, IC=0A
--5
V
tstg
tf
See specified Test Circuit.
300
--100
nA
--100
nA
700
450
MHz
6
pF
--120
--240
--0.9
--1.2
mV
V
V
30
ns
75
ns
15
ns
Switching Time Test Circuit
IB1
PW=20μs
D.C.≤1%
OUTPUT
IB2
INPUT
RB
VR
50Ω
RL
+
+
220μF
470μF
VBE=5V
VCC= --5V
IC=20IB1= --20IB2= --400mA
Ordering Information
memo
3,000pcs./reel
Pb Free
mA
VCE= --2V
--7mA
--1000
--5mA
--700
--600
--500
--3mA
--2mA
--400
--300
--1mA
--200
--0.5mA
--800
--600
--400
--200
--25°
C
A 10
5m --
5°C 25
°C
--1
IC -- VBE
--1200
Ta=
7
mA
--30
mA
--20
Collector Current, IC -- mA
--800
Shipping
MCPH3
IC -- VCE
--1000
--900
Package
Collector Current, IC -- mA
Device
12A02MH-TL-E
--100
0
0
IB=0mA
--100 --200 --300 --400 --500 --600 --700 --800 --900 --1000
Collector-to-Emitter Voltage, VCE -- mV
IT05094
0
0
--0.2
--0.4
--0.6
--0.8
--1.0
Base-to-Emitter Voltage, VBE -- V
--1.2
IT05095
No.7483-2/6
12A02MH
hFE -- IC
1000
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- mV
DC Current Gain, hFE
7
Ta=75°C
25°C
5
--25°C
3
2
100
--1.0
2
3
5 7 --10
2
3
5 7 --100
2
3
Base-to-Emitter
Saturation Voltage, VBE(sat) -- V
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- mV
3
2
--100
5°C
=7
Ta
5°C
--2
5
25
3
°C
2
--10
--1.0
2
3
5 7 --10
2
3
5 7 --100
2
3
10
7
5
3
2
3
5
7
2
--10
Collector-to-Base Voltage, VCB -- V
f=1MHz
ON-resistance, Ron -- Ω
IB
2
1.0
7
5
3
2
0.1
--0.1
3
5 7--1000
IT05097
3
2
25°C
--1.0
Ta= --25°C
7
75°C
5
3
2
2
3
5 7 --10
2
3
5 7 --100
2
3
5 7--1000
IT05099
fT -- IC
VCE= --2V
5
3
2
100
7
5
3
2
2
3
5 7 --10
2
3
5 7 --100
2
3
5 7--1000
IT05101
Collector Current, IC -- mA
PC -- Ta
OUT
1kΩ
3
2
5
700
IN
5
5 7 --100
3
IC / IB=20
IT05100
1kΩ
2
VBE(sat) -- IC
10
--1.0
3
Collector Dissipation, PC -- mW
7
5 7 --10
7
Ron -- IB
10
3
1000
Gain-Bandwidth Product, fT -- MHz
Output Capacitance, Cob -- pF
2
2
2
Collector Current, IC -- mA
f=1MHz
1.0
--1.0
Ta=
3
2
IT05098
Cob -- VCB
3
°C
75
5°C
--2
°C
25
--10
7
5
--0.1
--1.0
5 7--1000
Collector Current, IC -- mA
3
2
7
5
7
--100
7
5
--10
IC / IB=50
7
3
2
Collector Current, IC -- mA
VCE(sat) -- IC
--1000
IC / IB=20
--1.0
--1.0
5 7--1000
IT05096
Collector Current, IC -- mA
VCE(sat) -- IC
--1000
7
5
VCE= --2V
600
M
ou
500
nt
ed
400
on
ac
er
am
ic
300
bo
ar
d(
200
60
0m
m2
✕
0.
100
8m
m
)
0
2
3
5
7
--1.0
2
Base Current, IB -- mA
3
5
7
--10
IT06091
0
20
40
60
80
100
120
Ambient Temperature, Ta -- °C
140
160
IT05104
No.7483-3/6
12A02MH
Embossed Taping Specification
12A02MH-TL-E
No.7483-4/6
12A02MH
Outline Drawing
12A02MH-TL-E
Land Pattern Example
Mass (g) Unit
0.007 mm
* For reference
Unit: mm
2.1
0.6
0.4
0.65 0.65
No.7483-5/6
12A02MH
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PS No.7483-6/6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising