CDN Patient Price Guide

CDN Patient Price Guide
HEALTHCARE
Effective June 1, 2015
Price and Specification Guide
CANADA
HEALTHCARE SOLUTIONS
TABLE OF CONTENTS
GENERAL INFORMATION
2
4
5
6
6
7
8
8
9
10
General Information
Finishes & Laminates
Laminate Technical Specifications
High-Pressure Laminate Technical
Specifications
Solid Surface Technical Specifications
Upholstery Fabrics & Leather
Luxe Faux Leather
Graded-In Upholstery Programs
Customer’s Own Material - C.O.M.
KrugExpress Program
PRICING & SPECIFICATIONS
Benches
201
202
208
218
221
Tate
Zola
Jordan
Carlyle
223
224
230
238
241
Jordan Active Patient
Jordan
Jordan Bariatric
Jordan Sleep Recliner
245
246
Jordan
250
251
258
241
Amelio
Jordan Lounge Sleeper
Jordan Sleep Recliner
269
270
286
14
Solis
Zola
Karma
293
294
300
307
309
313
317
Karma
Cressida
Leyton
Jordan
Solis
Zola
Recliners
Gliders
12
20
24
25
28
30
33
36
Guest & Multi-Purpose Seating
Karma
Cressida
Cressida Bariatric
Solis
Solis Bariatric
Jordan
Jordan Bariatric
Corfu
42
43
44
46
47
49
50
Patient Seating
Cressida
Cressida Bariatric
Solis
Solis Bariatric
Jordan
Jordan Bariatric
53
54
70
84
Multiple Seating
Cressida
Solis
Jordan
322
323
Infusion Bays
Tranquility
100
Easy Access and Stools
101
70
84
Karma
Solis
Jordan
340
341
365
Juno
Trevisa
109
110
121
131
141
150
194
199
Lounge Seating
Leyton (Bariatric Rated)
Cressida
Zola
Zola Bariatric
Zola Privacy
Jordan
Carlyle
11
Sleepers
Behavioral Health
Occasional Tables
Casegoods
HEALTHCARE | CANADA | 1
GENERAL INFORMATION
Terms and Conditions
Net 30 days on approved credit. A late payment charge of 1% per
month will be applied on overdue invoices. This charge will be
pro-rated to the number of days past 30 days that the invoice is
overdue. All applicable sales taxes are extra. Distribution of this price
list does not in itself constitute an offer to sell. Orders can be
received only from authorized Krug dealers. Acceptance of any order
and terms of sale may be established at the discretion of Krug.
Deposits are required on orders received from new accounts as well
as on large or special orders. Krug reserves the right to
discontinue designs, or to change designs, construction, prices, or
materials without notice.
Customer Service Hours
Please note customer service hours are:
8:30 am to 5:00 pm est
1.888.578.KRUG
1.519.748.5177 fax
Order Acknowledgements
Each order will be acknowledged via e-mail or fax. This acknowledgement
is the final agreement between Krug and the customer, superseding
all previous communications regarding the purchase order. Where
there is a discrepancy on a purchase order between a product code
and a description, Krug will make every effort to resolve the discrepancy,
but will be ruled by the product code ordered. Please check all
acknowledgements for accuracy, and advise Krug of any
discrepancies with a purchase order.
Cancellation
A cancellation can be made only by expressed agreement with Krug.
A cancellation fee may be incurred for restocking.
Dimensions
Dimensions are in inches and approximate, and subject to change
without notice. Contact Customer Service if dimensions are critical.
Blanket Wrapping
Krug will blanket wrap larger seating orders at customer’s request.
Please indicate on your purchase order and contact Customer
Service.
Storage Charges
Krug reserves the right to assess a nominal storage charge if a
customer does not accept shipment of an order within a week of the
ship date.
Contact Information
Phone: 1.888.578.KRUG (5784)
Fax: 1.519.748.5177
Purchase Order Fax: 1.888.236.4783
Purchase Order E-mail: orders@krug.ca
Web: www.krug.ca
E-mail: solutions@krug.ca
Installation Support
For assistance please contact Technical Support at 1-888-578-5784 x216
or e-mail installationhelp@krug.ca and you will be directed to the
appropriate installation support person.
Pricing
Krug endeavors to ensure that all prices in this price list reflect
accurately our current prices. However, errors do occur and will be
rectified through notices to the field. Krug’s website will always have
the current list price. Krug reserves the right to acknowledge pricing
that may be different from the price list.
2 | CANADA | HEALTHCARE
Warranty
Krug warrants it’s products to be free from defects in materials and
workmanship for the lifetime of their use. This warranty is
applicable to products in use by their original purchaser. This
warranty does not apply to components and materials not
manufactured by Krug: these are subject to the specific warranties
of their manufacturers (if any). Repairs or replacement of any defect
covered under this warranty by Krug will be made, at our option and
method, at no charge to the original purchaser. Krug’s judgement is
final and binding with respect to the nature or cause of defects or
damage, and the necessity or manner of repair or replacement.
This warranty does not apply to defects or damage resulting from:
• normal wear and tear occurring with the use of the product
• negligence, misuse, excessive use, alteration, improper cleaning
or repair
• substitution or use of incorrect or unauthorized components or
material
• handling or installation that is incorrect, or that causes damage or
defect
• damage incurred by a freight carrier other than Krug
• wearing of finishes and fabrics, and normal variations in materials
(including dye lot variations)
• properties of natural materials, including wood and leather
• exposure to environments with uncontrolled temperature and
humidity (products must be transported, stored and used in climatecontrolled conditions)
Export Packaging
Krug is pleased to provide the option for export packaging on all our
products, to provide additional protection from damage.
Export packaging is provided at an upcharge of 5% of the net
selling price per item.
Export Packaging is STRONGLY RECOMMENDED for:
(A) all shipments outside of the lower 48 states and Canada.
(B) all shipments that will be held in storage for an extended period
prior to installation.
Important: Please note that Krug will not be responsible for damage
claims on product shipped or stored in the above conditions but
where export packaging has not been utilized.
Please contact Customer Service for specifications or any other
assistance regarding export packaging.
Freight Terms and Conditions
1. All product is shipped FOB the Krug factory. Freight is either
pre-paid to the destination (dealer’s dock or territorial warehouse,
where available) or not pre-paid, depending on established
customer specific freight terms.
2. Docks at the selected delivery location must be equipped to handle
a 53’ trailer. If a dock is inadequate for delivery by Krug, Krug will
re-deliver to another local location and any additional costs will be
charged to the customer.
3. When a Krug territorial warehouse (where available) is selected as
the default delivery location, it is understood that Krug pays freight
cost to the territorial warehouse only, and no further. The
Customer is responsible for all charges from this point.
4. For all deliveries, it is understood that Krug or its agent is making a
dock delivery only (equipped to handle a 53’ trailer), and any further
work of truck unloading, delivery beyond the dock, installation, and
removal of packaging is not authorized or paid for by Krug.
GENERAL INFORMATION
Freight Terms and Conditions, con’t.
5. Drop shipments to the installation site, and timed deliveries, are
available on larger shipments (full truckloads or slightly less) at no
additional charge. Drop shipments or timed deliveries for smaller
shipments may not be available, or if available will require a
surcharge. Deliveries on an after hours basis, or on weekends, or
any other special requirements, may be subject to a surcharge.
Location and contact information, and the requested time of
delivery, is required at least one week prior to the acknowledged
shipment date. If this information is not provided one week in
advance, or if the location or time of the drop shipment is
changed less than one week in advance, a surcharge may be
applied, and/or the drop shipment may not be scheduled. For
deliveries requested Monday to Thursday after 5:00 pm, please
apply a surcharge of $250/shipment. For deliveries requested
Monday to Friday before 7:00 am, please apply a surcharge of
$250/shipment. For deliveries requested Friday (after 3:00 pm) or
weekends, please apply a surcharge of $500/shipment. (local times).
6. For all deliveries - whether to the Customer location or drop
shipment - any circumstances that result in the delay of our
carrier (including unsuitable receiving facilities, or facilities not
open or available), service charges will be applied at the rate of
$75/hour. Where re-delivery is necessary because of these
circumstances, the full cost of re-delivery will be charged. If Less
Than Truck Load is delivering, one hour is allocated to unload.
Any additional time required to unload after the first hour is
$75/hour. If a Truck Load is delivering the order, three hours is
allocated to unload. Any additional time required to unload is
$75/hour. Direct deliveries to site for large orders are possible,
(must exceed $60,000 net), and accommodate 48 - 53’ trailers.
Krug is responsible for delivery to the approved delivery address.
If an address change is required, this must be authorized by Krug
5 business days prior to ship date. Any additional delivery costs
incurred after this time will be charged to the customer. If a
problem arises with a Krug product after the expiration of the
limited warranty period, Krug will exercise its best efforts to
achieve the satisfaction of the customer in a manner that is fair
to all concerned.
Product Strength and Durability Testing
All Cressida products have been thoroughly tested, and exceed the
testing requirements of ANSI/BIFMA X5.1 2002.
Specific test results and documentation are available on request.
Customer Satisfaction
It is the primary goal of Krug and our staff to ensure the complete
satisfaction of our customers with our products and performance.
If a problem arises with a Krug product after the expiration of the
limited warranty period, Krug will exercise its best efforts to achieve
the satisfaction of the customer in a manner that is fair to all
concerned.
Damaged Shipments
All Krug product is well engineered, carefully inspected, and expertly
loaded onto our trucks at our Distribution Center. If you receive any
damaged freight, we ask that you do not refuse the shipment. Krug
is not responsible for damage to goods that occurs in transit or
storage. It is the purchaser and/or receiver’s responsibility to examine
the goods upon receipt and to notify Krug of any damages, overages
or shortages. Any discrepancies should be noted on the Bill of Lading.
The delivering carrier will not accept responsibility for shortages or
damages if signed ‘‘clear’’. Notification of concealed damage claims
must be made to Krug Distribution within 5 days of delivery, along
with digital pictures if available. All product and packaging must be
available for inspection. Krug liability ceases after 5 business days
and Krug will not be responsible for concealed damages if
shipments are left unopened. Krug is not responsible for the condition
of product that is stored or installed in an environment where
temperature and humidity are not controlled.
Field Product Report Authorization
Krug's written authorization, in the form of an FPR number, must be
obtained prior to incurring charges of any kind if Krug is expected to
pay these charges. This includes authorization for field repairs and
replacements, installation and delivery charges. Krug reserves the
right to have its representative inspect product related to any
request for such authorizations, prior to that authorization being
provided. Deductions from invoices paid for any charges to Krug,
without prior written authorization in the form of an FPR, will not be
accepted. Digital photographs may be required to complete the FPR
process.
Returns
No merchandise may be returned without Krug’s prior written
consent. In the event of an authorized return, a Field Product Report
(FPR) number will be issued, and a restocking charge will apply.
Return transportation charges must be prepaid. Unauthorized
returns will not be accepted and will be returned freight collect. All
merchandise being returned must be properly packaged in its
original or comparable replacement packaging to ensure protection
of the product during handling and transportation. Returns on orders
duplicated by the customer must be received in their original
packaging to be accepted. Product being returned where Krug has
authorized its liability for replacement or repair will be thoroughly
inspected on its return, and the results compared to the reason for
the return stated on the FPR. Any discrepancies, such as additional
damage, signs of usage, missing parts, etc., will result in an adjustment
to the amount of credit issued.
Custom Capabilities
Over 15% of our orders involve some type of custom work, and we
invite our customers to make use of our extensive capabilities.
These include:
1) Dimensional customization of standard size products
2) Custom finishes
3) For larger orders, completely custom-designed products, as well
as non-standard wood species can be specified.
Custom orders may require additional production lead times. Contact
Engineering at the e-mail address engquotes@krug.ca.
Care and Maintenance Leather
Leather is a natural product and requires very little care during use.
Most stains can be removed with a clean dry cloth. For stubborn
spots and stains, use a mild non-detergent cleaner, rinse well and let
air dry naturally. Do not use saddle soap, cleaning solvents,
furniture polish, oils, varnish, abrasive cleaners, soaps or ammonia
waters.
Fabric Upholstery
Professional upholstery cleaning is recommended.
Flammability Standards for Krug Textiles - Upholstery Program
• Passes State of California Technical
Bulletin CAL 117-2013
HEALTHCARE | CANADA | 3
FINISHES & LAMINATES
Wood Finishes for Seating &
Occasional Tables
Natural Characteristics of Wood
Standard wood finishes are:
Wood is a natural product with inherent color variations that will never be fully
mitigated by the finishing process. Please anticipate variation in colors within a single unit,
from piece to piece, and from Krug wood finish samples. If a very close match is required,
a sample must be provided with the order and an upcharge will apply. Exact color matches
are not possible.
Finishes on Beech
Appalachian Cherry
American Cherry
Imperial Cherry
Light Cherry
Medium Cherry
Natural Cherry
Sable Cherry
Standard Cherry
Light Oak
Harvest Oak
Mahogany
Mellow Oak
Espresso
Cordovan Walnut
Natural Walnut
Regular Walnut
Dark Walnut
Clear Beech
Medium Anigre
Custom Wood Finishes
Add 10% list to your order for special finishes a minimum upcharge is $500 list per finish
per order. (For example, on all orders up to $5000 list an upcharge of $500 will apply, on
orders $5000 and up add 10% list to order.)
Special finish upcharges on seating products are calculated on a grade 1 value. For orders
with special finishes, a sample that is a minimum 3” by 3” must be received with the order.
Special finishes may add additional lead time to production schedules. Since wood is a
natural product, some variations in grain, color and stain acceptance will occur. In our
finishing processes, we try to minimize variations, but some variation between samples
and finished goods should be anticipated.
Dual Finishes
Add 10% list per item if specifying dual finish.
Standard Wood Finishes
No upcharge will be applied when specifying a finish available as standard on one species
onto maple seating and occasional tables. Clear finishes are not available on other species
since they are a clear finish on top of the natural veneer color.
Finishes on Maple
Clear Maple
Honey Maple
Wheat Maple
METAL FINISHES
Silver Metallic Standard - No Upcharge
Solis silver metallic frames are available with an anti-microbial finish for an upcharge of $44 list per chair or table.
Additional Solis Frame Finishes are available for an upcharge of $44 list per seat/ table.
Available colors are:
• White • Parchment • Sand • Taupe • Warm Grey • Cool Grey • Black
For all metal finishes other than Silver Metallic, there is a minimum order quantity of 30 units per color. The anti-microbial finish is included in
the additional finish up-charge. Upcharges for order quantities less than 30 units per color or custom metal finishes, please contact Customer
Service to obtain a quote.
IN-STOCK LAMINATES
Krug’s in-stock laminates are available in 16 laminate selections. There are 8 wood grain laminates, 4 solid color laminates in a selection of
popular shades and 4 Exotic laminates offering a distinguished appearance. Exotic laminates are subject to minimum order quantities and
extended lead times. Polymer edges will automatically match the laminate selected.
Wood Grain
Name & Number
Supplier
Polymer Edge Names
Corretto Cherry HP-288-N
Sugarloaf Maple T630
Mocha Cherry HP-341-N
Monticello Maple 7925
Nightfall WX421-N
Samba Cherry T460
Shiraz Cherry T472
Pionite
Arborite
Pionite
Wilsonart
Pionite
Arborite
Arborite
Corretto Cherry
Sugarloaf Maple
Mocha Cherry
Monticello Maple
Nightfall
Samba Cherry
Shiraz Cherry
Exotic Laminate
Name & Number
Supplier
Polymer Edge Names
Backwoods Sycamore HP689-N
Edgewood Sycamore HP690-N
Gunstock Walnut WW971-N
Thunderstorm HP-359-N
Pionite
Pionite
Pionite
Pionite
Backwoods Sycamore
Edgewood Sycamore
Gunstock Walnut
Thunderstorm
Solid Laminates
Name & Number
Supplier
Polymer
Edge Names
Almond T445
Black T203
Shadows T201
White D354-60
Pionite
Arborite
Arborite
Wilsonart
Almond
Black
Fog
White
Non-Stocked Laminates
For specific lead time and application questions, please contact Krug Customer Service for your requirement. Upcharges will be applicable
for non-stocked laminates, depending on their cost. Non-stocked laminates may be subject to minimum orders sizes.
HEALTHCARE LAMINATES
• Hardrock Maple • Candlelight • Mocha Cherry • Antique White • Samba Cherry • Shiraz Cherry
4 | CANADA | HEALTHCARE
LAMINATE - TECHNICAL SPECIFICATIONS
(All references to “Laminate” in this price list mean thermofused melamine. This material is also known as low-pressure laminate or LPL)
NEMA STANDARDS *
(LD 3-2005)
KRUG’S
PROGRAM
Measure of the ability of the surface to keep its design
or color under abrasive wear
400 cycles
400 cycles - Solid Colors
125 cycles - Prints
Appearance
Presence of visual defects on decorative surface
No surface defects
No surface defects
Scratch Resistance
Measure of the ability of decorative surface to scratch
by diamond tip tool
n/a
3.4 N
Stain Resistance
Measure of the ability of the decorative surface to resist
to stain when exposed to 15 household products
(see list below of products tested)
1 to 10 no effect
11 to 15 moderate (difficult
to perceive the stain)
1 to 10 no effect
11 to 15 moderate
Cleanability
Measure of the ability of a decorative surface to be
cleaned when exposed to 15 soiling agents (See list below)
Maximum 20
Maximum 20
Light Resistance
Measure of the ability of a decorative surface to retain
its color when exposed to a light source close to sunlight
Slight
Slight
High Temperature
Resistance
Measure of the ability of a decorative surface to maintain
its color and aspect when exposed to high temperature
Slight
Slight
Radiant Heat
Resistance
Measure of the ability of a decorative surface to resist
any damage when exposed to a radiant heat source
No effect after
60 seconds
No effect after
60 seconds
Boiling Water
Resistance
Measure of the ability of a decorative surface to resist
any damage when exposed to boiling water for 20
minutes
No effect
No effect
Impact Resistance
Measure of the maximal falling height of a steel ball
that does not cause fracture to the decorative surface
381 mm/n
15 in
381 mm/n
15 in
Fire Resistance
Measure of flame spread rating under controlled
conditions
n/a
Class III
Warping
Measure of the maximal departure of the surface
from flatness
n/a
3 mm/m
PROPERTIES
DESCRIPTION
Wear Resistance
STAIN RESISTANCE (see above)
products tested:
STAIN
PREPARATION NOTES
APPLICATION
1. Distilled Water
As received
Apply 2 drops (6 mm spot) cover with watch glass
2. Ethyl Alcohol Solution
A solution of 50% ethyl alcohol and 50%
distilled water as received
As above
3. Acetone
As received
As above
4. Household Ammonia
As received (non-sudsing type)
As above
5. 10% Citric Acid
A solution of 10% citric acid in distilled water
As above
6. Vegetable Oil
As received
As above
7. Fresh Coffee
1 teaspoon instant coffee per 180 ml
of distilled water
As above
8. Fresh Tea
Brew 1 tea bag per 120 ml distilled
boiling water for 2 minutes
As above
9. Ketchup
As received
As above
10. Yellow Mustard
As received
As above
11. 10% Povidone Iodine
As received
As above
12. Black Permanent Marker
As received
Mark spot (6 mm spot), do not cover
13. #2 Pencil
As received
As above
14. Wax Crayon
As received
As above
15. Black Paste Shoe Polish
As received
Apply (6 mm spot) do not cover
HEALTHCARE | CANADA | 5
HIGH-PRESSURE LAMINATE - TECHNICAL SPECIFICATIONS
(Specifications refer to Krug’s standard high pressure laminates)
PHYSICAL PROPERTIES
NEMA LD3-2005
STANDARD HPLs
Appearance
3.1
No ABC Defects
Light Resistance
3.3
Slight
Cleanability
3.4
20 (maximum)
Stain Resistance (see Products Tested on previous page)
Reagents 1-10
Reagents 11-15
3.4
Boiling Water Resistance
3.5
Slight
High Temperature Resistance
3.6
Slight
Ball Impact Resistance - mm
- in
3.8
762 (minimum)
30 (minimum)
Radiant Heat Resistance - sec
3.10
100 (minimum)
Dimensional Change
Machine Direction - %
Cross Direction - %
3.11
Wear Resistance - cycles
3.13
No Effect
Moderate
1.1 (maximum)
1.4 (maximum)
400 (minimum)
SOLID SURFACE - TECHNICAL SPECIFICATIONS
(Specifications of Solid Surface Materials vary slightly by brand. The following is a typical set of technical specifications.)
PROPERTIES
UNIT
Specific Gravity
g/cm
Tensile Strength
psi
3
RESULT
TEST STANDARD
1.8
5,400
ASTM D 638
psi
1.4x10ASTM D 638
0.42
ASTM D 790
psi
9,200 ASTM D 790
1.38x105
ASTM D 785
92
ASTM D 785
3.04x105
ASTM D785
Gloss (60 Gardner)
5 - 20
ANSI Z124
Color Stability
No Change
NEMA LD3
Wear & Cleanability
Passes
ANSI Z124
Boiling Water Surface Resistance
No Change
NEMA LD3
High Temperature Resistance
No Change
NEMA LD3
Stain Resistance
Passes
Nema LD3
Impact Resistance
No Fracture
Nema LD3
Tensile Modulus
Elongation
% min
Flexural Strength
Flexural Modulus
psi
Hardness (Rockwell)
Thermal Expansion
mm/mc
O
IZOD Impact Strength
ft.lbs/in
0.28
ASTM D256
Water Absorption Weight
%max
0.03
ASTM D 570
Fungi & Bacteria
No Attack
ANSI Z124
Weatherability
No Change
ASTM D 1499
All Colors
NSF
NSF 51
6 | CANADA | HEALTHCARE
Listed
KRUG TEXTILES - UPHOLSTERY FABRICS | LEATHER
Krug Textiles - Fabric Program
Krug Grade 1, 2 and 3 fabrics are also available on a cut yardage basis.
Grade 1
Perk
Vox
Fuse
Expo
Auburn
Cabana
Cedar
Crimson
Dijon
Ebony
Flint
Patriot
Pewter
Regal
Sesame
Walnut
Bark
Black
Cocoa
Downpour
Eco
Frothe
Goldenrod
Honest
Hot
Limelight
Morel
Mystic
Navy
Oat
Par
Ruby
Snap
Turquoise
Azurean
Carmine
Cress
Ginger
Iris
Lunar
Malted
Morel
Pepper
Pimento
Pristine
Saffron
Walnut
Festive
Fog
Latte
Leaf
Lemon
Oasis
Raspberry
Sky
Spirit
Sprout
Tuxedo
Viola
Zest
Epic
Knack
Bangle
Lineup
Azure
Capri
Espresso
Flare
Granite
Jute
Kiwi
Limestone
Pearl
Porcini
Regal
Slice
Steel
Berry
Brisk
Carbon
Dark Roast
Filament
Fresco
Glaze
Reed
Sax
Teak
Wave
Zest
Zing
Baltic
Cork
Granite
Orchid
Sable
Suede
Teak
Baltic
Fern
Pewter
Sandstone
Shadow
Spice
Tranquil
Solace
Current
Clang
Kinney
Almond
Azul
Blaze
Carmine
Celadon
Cinder
Earth
Ebony
Fossil
Gilded
Indigo
Ivory
Mineral
Pear
Peony
Birch
Cadet
Eclipse
Espresso
Moss
Pecan
Plum
Amber
Claret
Clove
Cress
Flint
Malt
Raven
Coffee
Frappe
Glacier
Mineral
Nectar
Steel
Valentine
Grade 2
Grade 3
Krug Textiles - Leather Program
Grade 8
Black
Stone
Sand
K13.1000
K13.3000
K13.5000
Graphite
Espresso
White
K13.4000
K13.8000
K13.9000
Please contact Customer Service for specific information on leathers, available colors and lead times.
HEALTHCARE | CANADA | 7
KRUG TEXTILES | LUXE | FAUX LEATHER
Krug Textiles - Faux Leather Program
Grade 2
White
Cream
Parchment
Sandstone
Vanilla
Taupe
Mocha
Tan
Chestnut
Bisque
Chocolate
Black
Earth
Brick
Wine
Garnet
Rust
Citron
Sprig
Chinchilla
Steel
Grey
Lagoon
Pacific Blue
Navy
Plum
GRADED-IN UPHOLSTERY PROGRAMS
Krug has partnered with several textile brands to grade in their
offerings, designed to provide a wide range of upholstery selections
for our seating products.
Upholstery Samples
If you require additional samples or memos for presentation, please
contact fabric supplier directly.
Upholstery pricing and availability is subject to change without notice.
We grade this upholstery according to the pricing of the fabric
suppliers - when their pricing changes, the Krug grade may change.
Flammability Standards
• Tunnel Test Surface Ratings Class A rating
• Class 1 UFAC
• Passes State of California Technical Bulletin
117-Section E
When placing an order, a Krug customer must specify the complete
upholstery number, along with the appropriate Krug model number and
finish. Krug will supply the complete product at the prices listed.
Orders specifying graded-in upholstery cannot be cancelled once the
upholstery has been ordered.
Upholstery Grades
To determine the price of a product for graded-in upholstery, use the
reference lists located on Krug’s website under - Products - Textiles,
to view the upholstery grade (1-9). Krug is not responsible for the
discontinuation of this upholstery. Please contact Customer Service
for information on upholstery not listed.
Please contact fabric supplier directly for further flammability
information pertaining to specific upholstery.
Special Conditions
Acknowledgements will give the estimated delivery date of the
finished product. Some upholstery is imported, and availability may
affect estimated delivery time. For large projects, please contact
fabric supplier directly for availability of yardage.
When two upholstery selections are specified for use on seating, the
higher grade upholstery price will apply to the order.
High Performance upholstery; Polyurethane, Vinyl or Crypton, is
particularly suitable for healthcare and other intensive-use
environments.
CUSTOMER’S OWN MATERIAL - C.O.M.
Upholstery Cover Yardage Calculation
To calculate yardage required for COM and
other non-standard upholstery cover orders,
please contact Krug Customer Service at
1.888.578.5784.
Unless otherwise stated, upholstery cover
rolls are assumed to be a minimum 54” wide.
Please use the guide below to calculate the
percentage of extra upholstery cover required
to cover large repeats.
2”-14”
15”-19”
20”-27”
28”-36”
FABRIC
Plain
Repeat
Repeat
Repeat
Repeat
54
0%
10%
15%
20%
25%
53-50
16%
20%
25%
30%
35%
48
16%
25%
30%
35%
40%
45
40%
50%
55%
60%
65%
36
50%
60%
65%
70%
75%
8 | CANADA | HEALTHCARE
The repeat is calculated by adding both the
vertical and horizontal measurements together
and then referring to the chart below for
extra yardage required.
CUSTOMER’S OWN MATERIAL - C.O.M.
Customer’s Own Material (COM/COL)
COM/COL must be received three weeks prior to the acknowledged
ship date. Orders with COM/COL not received by the required deadline
will be delayed.
A description of the upholstery cover, including supplier name,
pattern name, upholstery cover name and color number must be
included with the purchase order.
COM/COL testing requires 3 business days and samples are to be
directed to Customer Service. The customer has the option of
providing the sample COM/COL before, at time of order, or once the
sample COM/COL is received. If the customer does not send a sample
for approval in advance of sending actual material, Krug will not be
responsible for the cost of any upholstery cover or other
material that it determines to be unsuitable for the product or our
process.
When the COM/COL upholstery cover is received at Krug, it must
be clearly identified with the upholstery cover name and color, and
tagged with name of the Krug customer and purchase order number.
Krug will inspect all COM/COL upholstery covers when received to
determine if it will be suitable for upholstery. Where Krug feels that
the upholstery cover or leather specified will compromise the quality
or integrity of our products, customers will be contacted to direct
these concerns. Further, Krug reserves the right to refuse to accept
and use any COM upholstery covers or leathers that will compromise
our products in any way that is unacceptable to Krug. Krug cannot
assume responsibility for the durability or tailoring quality of
customer’s own material.
Yardage specified in this price guide is approximate. In the case of
multiple product orders, multiply the number of items by the COM
yardage specified to determine upholstery cover required, unless
otherwise indicated. Additional yardage may be needed if the
material is less than 54” wide, or patterned or striped and requires
matching. All COMs are cut “up the roll” unless otherwise stated by
the customer. All striped upholstery covers will be applied vertically
unless otherwise stated by the customer and after approval by Krug.
Krug will not be responsible for directional or positional
problems with its application of COM material, unless it has been
provided with explicit instructions by the customer. Special instructions
should be sent to Krug Customer Service, including a sample
(or photocopy) of the upholstery cover. Krug is not responsible for
instructions sent with the upholstery cover rolls, or for the method
of upholstery if no instructions have been provided.
Price increases and freight charges to COM/COL acquired on the
customer’s behalf will be passed onto the customer.
Application of Directional Upholstery cover
Some COM upholstery covers will be considered directional by Krug
even though they are not considered directional by the supplier. All
COMs are automatically cut “up the roll” unless otherwise stated
by the customer (please see below).
Standard-Cut
“up the roll”
Non-Standard-Cut
across the roll “railroad”
COM/COL orders cannot be scheduled into production until the
upholstery cover has arrived and inspection is complete.
All packages must be clearly marked ‘‘For Customs Clearance by
Russell A. Farrow Custom Brokers’’.
According to the North American Free Trade Agreement (NAFTA),
goods shipped between the United States and Canada can qualify
for exemption from all duties, or for a reduction in duties, if the goods
can be proven to originate in either the United States, Canada or
Mexico.
Canada Customs requires that a NAFTA Certificate of Origin and a
Commercial Invoice be completed and sent with the upholstery
cover shipment. The Commercial Invoice must clearly state the
description of the upholstery cover, the selling price, the make-up
or content, and the purchaser. The absence of these two documents
will delay the shipments at the U.S./Canada border, thereby potentially
delaying the customer order. If the total value of the shipment is less
than $1200 U.S., Customs will accept a Low Value Statement of
Origin in place of the NAFTA Certificate of Origin. The Low Value
Statement must be signed by a representative of the exporting
company. This statement may either be included on the commercial
invoice or attached to the invoice.
Krug is happy to answer any questions or concerns about
COM/COL shipping procedures and the required documents. Please
contact our Customs Specialist at 1.888.578.5784.
CAL 133 & Moisture Barrier
California Technical Bulletin 133 is a flammability test for seating.
Krug offers a compliance method which, in combination with
non-flammable upholstery covers, may enable the products to meet
certification requirements for this test. This process at the same time
also provides the products with a Moisture Barrier - a treatment that
helps to prevent the passage of liquids and moisture to inside of
upholstered components - thereby conferring sanitary and anti-infection
benefits. So when CAL 133 is specified, the product also automatically
has a Moisture Barrier, and when a Moisture Barrier is specified, the
product also features the compliance method and low flammability
features of CAL 133.
The application of this upcharge and the compliance method does
not mean that the specific configuration of product and upholstery
cover are tested and officially certified as being CAL 133 compliant.
If official certification is required, Krug will provide this (through an
independent certified testing laboratory) at a charge of $700 per
item, plus the cost of the product to be tested. Lead time for
certification testing is typically 4-8 weeks. Krug assumes no responsibility
for the testing of our products in combination with upholstery covers,
or for the results of any testing conducted. Some specific configurations
of product and upholstery have already been tested. Please contact
Customer Service for additional information.
C.O.L. Yardage
To calculate C.O.L. yardage required, please use the following
conversions based on COM yardage: Leather must be ordered in
square footage.
- 17 square feet in a yard
- Approx. 3 yards in a hide
- Approx. 51 square feet in a hide
- Please use grade 3 pricing for COL
COM/COL Shipping Procedures
For seating COM/COL upholstery covers, please send upholstery
covers to:
Krug Inc.
111 Ahrens Street
Kitchener, Ontario
Canada N2H 4C2
Attention: RECEIVER
HEALTHCARE | CANADA | 9
KRUGEXPRESS PROGRAM
PROGRAM DETAILS
KrugExpress orders are ready to ship by the date acknowledged. Delivery and shipping schedules may result in actual shipping of orders at
a later date. Statutory holidays and scheduled factory vacations may add to acknowledged lead times of KrugExpress orders. Unless
otherwise specified on the order, the customer’s standard method of shipping Krug products will be utilized.
Available factory capacity for KrugExpress is filled by orders received on a ‘‘first come, first serve’’ basis. If the normal KrugExpress lead
time is not available for your order because available capacity has been filled, you will be immediately advised of the earliest available
ready-to-ship date. Please consult your Customer Service representative in advance if you wish to confirm the specific lead time availability
for a KrugExpress order.
Orders must be received by midnight of a given day for that day to be considered the official day the order is received. Order lead times are
acknowledged from the date the order is received, but not including the date the order is received.
KrugExpress orders must be ‘‘clean’’ when received in order to be considered officially received on a given day, and lead times will be
acknowledged from the date orders are determined to be ‘‘clean’’. Changes to KrugExpress orders are not allowed under any circumstances.
Orders for product on KrugExpress must clearly state: ‘‘KrugExpress’’.
COM and graded-in upholstery is available on Krug Express. Orders are scheduled on Krug Express, and given the best available date,
when the upholstery is received at Krug. Some conditions apply.
SEATING PROGRAM
Orders for seating products on the KrugExpress program may be subject to quantity maximums. Please contact Krug Customer
Service for more information.
Quantity maximums are dependent upon available capacity, in order to insure that we ship all orders on time.
Please note that the CAL 133 option is not available on KrugExpress.
10 | CANADA | HEALTHCARE
PATIENT SEATING
43
44
45
46
47
48
49
50
51
CRESSIDA
Cressida LEED Credit Summary
Cressida Dimensions & COM
Requirements | Patient Seating
Cressida Patient & Bariatric Patient
SOLIS
Solis LEED Credit Summary
Cressida Dimensions & COM
Requirements | Patient Seating
Solis Patient & Bariatric
JORDAN
Jordan LEED Credit Summary
Jordan Dimensions & COM
Requirements | Patient Seating
Jordan Patient & Bariatric
42 | CANADA | HEALTHCARE
CRESSIDA | LEED CI CREDIT SUMMARY
CRESSIDA PATIENT
PRE-CONSUMER
RECYCLED CONTENT = 6.66%
MATERIAL CONTENT:
4.35% Fabric
35.87% Plywood
6.52% Cardboard
POST-CONSUMER
RECYCLED CONTENT = 22.07%
38.04% Steel
6.52% Urethane Foam
Up to 53.26% of this Cressida product is
recyclable at the end of its useful life.
CONTRIBUTES TO
2.1 - 2.2
Construction Waste Management
1-2 point(s)
CREDIT 3.3
Resource Reuse
1 point
CREDIT
4.1
Recycled Content
1 point
CONTRIBUTES
TO
CREDIT 4.2
Recycled
Content
1 point
Construction Waste Management
1-2 point(s)
CREDIT 4.5
Low Emitting Materials, (MUST BE REQUESTED)
Resource Reuse
1 point
Systems Furniture & Seating
1 point
Recycled Content
1 point
CREDIT 5.1
Regional Materials*
1 point
Recycled Content
1 point
CREDIT 7
Certified Wood
1 point
Low Emitting Materials,
(MUST BE REQUESTED)
Systems & Seating
1 point
* This credit is only applicable if in total 20% of the combined value of the procurement of
construction
Regional Materials*
1 point
materials
and
in
the
furniture
are
manufactured
within
a
radius
of
500
miles.
This
credit
will
apply if the
Certified Wood
1 point(s)
installation of the finished product occurs within 500 miles of Kitchener, Ontario.
(MUST BE REQUESTED)
CREDIT
2.1 - 2.2
3.3
CREDIT 4.1
CREDIT 4.2
CREDIT 4.5
CREDIT
CREDIT
CREDIT
CREDIT
5.1
7
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are
manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
solutions@krug.ca | www.krug.ca | 1.888.578.KRUG
®
®
level CERTIFICATION, AIR-EMISSIONS AND FSC CERTIFICATION
level® CERTIFICATION
BIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degree
of sustainability of furniture. This standard evaluates product and company environmental attributes and
compliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &
Ecosystem Health and Social Responsibility. Cressida products have earned level®, BIFMA‘s sustainability
certification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONS
All Cressida products are supplied air-emissions certified. Contact customer service for information.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturing
facilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that the
growth, harvesting and production of goods are entirely achieved through responsible forestry, which guarantees
a healthy supply of forest resources for generations to come.
Contact customer service for further information, pricing and leadtimes.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve a
point from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) Rating
System.
HEALTHCARE | CANADA | 43
CRESSIDA | PATIENT & BARIATRIC PATIENT
DIMENSIONS & COM REQUIREMENTS
21” Seat
24” Seat
30” Seat
Overall
Width
Overall
Depth
Overall
Height
Seat
Height
Height of
Arms from
Floor
Width
Between
Arms
Seat
Depth
Shipping
Weight
Cube
24.5
27.5
33.5
28.5
28.5
28.5
43.5
43.5
43.5
18.5
18.5
18.5
26
26
26
21
24
30
18.75
18.75
18.75
45
51
60
17
22
28
COM - YARDAGE REQUIREMENTS
COM Yardage
Seats & Backs Only
COM Yardage
Seat Only
COM Yardage
Back Only
COM Yardage
Closed Arm Panel
21” - One Chair
21” - Two Chairs
21” - Three Chairs
21” - Four Chairs
2.2
4.25
6.45
8.5
0.95
1.3
2.25
4.6
1.25
2.95
4.2
3.9
.8
.8
.8
.8
24” - One Chair
24” - Two Chairs
24” - Three Chairs
24” - Four Chairs
2.1
4.14
6.45
8.28
0.8
1.19
2
2.38
1.95
2.95
4.9
5.9
.8
.8
.8
.8
30” Bariatric - One Chair
30” Bariatric - Two Chairs
30” Bariatric - Three Chairs
30” Bariatric - Four Chairs
3.15
6.3
9.21
12.6
1.2
2.4
3.6
4.8
1.95
3.9
5.85
7.8
.8
.8
.8
.8
Note: Some vinyls, leathers & upholsteries are not suitable for application on Cressida seating.
The approval process is as follows:
1. A sample of the COM must be provided to Krug Customer Service prior to or at the time of order.
2. The sample will be reviewed and the customer advised if the fabric is unsuitable.
3. The COM fabric or leather will be inspected when received at the factory, to identify any further concerns with its suitability.
ORDERING NOTES:
Combination upholstery (more than one upholstery cover within the same unit) is an option on all Cressida upholstered products. When
combination upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $22 list per unit and $44 list per unit
for three fabrics. When graded in combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service
for a quote - please provide the fabrics specified and a description of where each fabric is to be applied on the product in order to obtain a quote.
Replacement seat and back covers can be quickly installed on Cressida products that were originally ordered with the Removeable cover option.
Replacement seat and back covers can also be installed on Cressida products that were not originally ordered with the Removeable cover
option, with some simple staple removal on the original seats and backs.
Cressida Option Upcharges
Moisture Barrier (per yard)
Removable Seat Covers
Patient Removeable 21” & 24” Back Covers
Patient Removeable 30” Back Covers
21” & 24” Cleanable Under-Seat Splashguard
30” Cleanable Under-Seat Splashguard
WEIGHT CAPACITIES
Cressida weight capacities are as follows:
Patient Chairs (21” & 24”) - 350 lbs
Bariatric Patient Chair (30”) - 750 lbs
FEATURES:
For a complete list of features see page 21.
44 | CANADA | HEALTHCARE
$ List
44
58
58
99
40
47
CRESSIDA | PATIENT & BARIATRIC PATIENT
DESCRIPTION
MODEL
SPECIES
COM
1
2
COL
3
7
LEATHER
8
21” Open Arm
CRE2-P21OPS
9
Beech, Maple
792
842
887
983
1078
1133
1265
1361
1548
21” Open Arm with arm cap
CRE2-P21OPP
807
858
903
999
1094
1149
1281
1377
1563
21” Closed Arm
CRE2-P21CLS
991
1070
1133
1254
1378
1494
1619
1750
1973
1007
1086
1149
1269
1393
1510
1635
1766
1989
832
882
927
1023
1119
1210
1305
1401
1588
847
898
943
1038
1135
1225
1321
1416
1603
1031
1110
1173
1295
1419
1534
1659
1790
2013
1047
1126
1189
1310
1434
1550
1675
1806
2029
988
1054
1121
1243
1382
1508
1637
1777
2020
30” Open Arm with arm cap
CRE2-P30OPP
1004
1070
1137
1259
1398
1524
1636
1792
2036
30” Closed Arm
CRE2-P30CLS
1188
1282
1347
1514
1681
1832
1991
2165
2445
1203
1298
1363
1530
1697
1848
2007
2181
2461
FABRIC GRADES
4
5
6
7
LEATHER
8
9
145
190
Beech, Maple
21” Closed Arm with arm cap
CRE2-P21CLP
24” Open Arm
CRE2-P24OPS
Beech, Maple
24” Open Arm with arm cap
CRE2-P24OPP
24” Closed Arm
CRE2-P24CLS
Beech, Maple
24” Closed Arm with arm cap
CRE2-P24CLP
30” Open Arm
CRE2-P30OPS
Beech, Maple
Beech, Maple
30” Closed Arm with arm cap
CRE2-P30CLP
DESCRIPTION
COM
1
MODEL
2
COL
3
Adjustable Headrest for 21”, 24” & 30”
CRE2-RH
110
120
130
160
FABRIC GRADES
4
5
6
175
205
WEIGHT CUBE
235
3
0.9
FEATURES:
For a complete list of features see page 21.
PRODUCT CODE KEY
Line
Series
Chair Style
Size
21
CRE
2
P
Cressida
Chair
Patient
Arm Style
OPS
Open Arm
24
OPP
Open Arm
Polymer Arm Cap
30
CLS
Closed Arm
44
CLP
Closed Arm
Polymer Arm Cap
HEALTHCARE | CANADA | 45
SOLIS | LEED CI CREDIT SUMMARY
y rammuS tiderC - IC DEEL
SOLIS
PATIENT
TNEITAP SILOS
MATERIAL CONTENT:
PRE-CONSUMER
RECYCLED CONTENT = 17%
2% Steel Seat Springs
3% Plywood
POST-CONSUMER
RECYCLE CONTENT = 22%
6% Fabric
9% Cardboard
15% Urethane Foam
65% Steel
RP
ER
OP
ER
:TNETNOC LAIRETAM
2.1 - 2.2
CREDIT 3.3
CONTRIBUTES TO
CREDIT 4.1
Construction Waste Management
CREDIT 4.2
Resource Reuse
CREDIT 4.5
CREDIT
2.1 - 2.2
3.3
CREDIT 4.1
CREDIT 4.2
CREDIT 4.5
CREDIT
CREDIT
CONTRIBUTES TO
Construction Waste Management
1-2 point(s)
Resource Reuse
1 point
Recycled Content
1 point
1-2 point(s)
Recycled Content
1 point
1 point
Low Emitting Materials, (MUST BE REQUESTED)
1 point
Systems & Seating
1 point
1 point 1 point
Regional Materials*
Certified Wood
1 point
(AVAILABLE ON SOME PRODUCTS - MUST BE REQUESTED1) point
Recycled Content
Recycled Content
CREDIT 5.1
Low Emitting
Materials,
CREDIT 7
Systems & Seating
Regional Materials*
1 point
* This credit is only applicable if in total 20% of the combined value of the procurement of construction
Certified Wood
1 point(s) materials
and in the) furniture are manufactured within a radius of 500 miles. This credit will apply if the installation of the
(MUST BE REQUESTED
5.1 2.2 - 1.2 TIDERC
etsaW noitcu rtsCREDIT
noC
esueR ecruCREDIT
oseR
3.3 TIDERC
7
tnetnoC delcyceR
1.4 TIDERC
tnetnoC delcyceR
2.4 TIDERC
finished product occurs within 500 miles of Kitchener, Ontario.
iretaM gnittimE woL
5.4 TIDERC
above information regarding LEED contribution applies to both the upholstered as well as mesh back versions.
gnitaeS & sme*This
tsyS credit is only applicable if in total 20% of theThe
combined
value of the procurement of construction materials and in the furniture are
*slairetaM lanoigeR
1.5 TIDERC
manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
dooW deifitreC
7 TIDERC
P EMOS NO ELBA LIAVA(
ibmoc eht fo %02 latot ni fi elbacilppa ylno si tiderc sihT *
5 fo suidar a nihtiw derutcafuna®
m era erutinruf eht ni dna
tnO ,renehctiK fo selim 005 nihtiw srucco tcudorp dehsinif
®
| www.krug.ca | 1.888.578.KRUG
level CERTIFICATION, AIR-EMISSIONS ANDsolutions@krug.ca
FSC CERTIFICATION
pa noitubirtnoc DEEL gnidrager noitamrofni evoba ehT
.www | ac.gu rk@snoitulos
level® CERTIFICATION
BIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degree
of sustainability of furniture. This standard evaluates product and company environmental attributes and
compliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &
Ecosystem Health and Social Responsibility. Solis products have earned level®, BIFMA‘s sustainability
certification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONS
All Solis products are supplied air-emissions certified. Contact customer service for information.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturing
facilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that the
growth, harvesting and production of goods are entirely achieved through responsible forestry, which guarantees
a healthy supply of forest resources for generations to come. Contact customer service for further information,
pricing and leadtimes.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve a
point from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) Rating
System.
46 | CANADA | HEALTHCARE
SOLIS | PATIENT & BARIATRIC
DIMENSIONS & COM. REQUIREMENTS
Overall
Height
Seat
Height
Height of
Arms from
Floor
Width
Between
Arms
Seat
Depth
Shipping
Weight
Cubes
UPHOLSTERED BACK
25
28
21" Seat
43.75
18.5
26
20
20
54
21
2.1
0.9
2.0
0.8
24" Seat
28
28
43.75
18.5
26
23
20
58
23
2.1
0.9
2.0
0.8
30” Seat
34
28
43.75
18.5
26
29
20
64
28
3.1
0.9
2.2
0.8
MESH BACK
25
21" Seat
28
43.75
18.5
26
20
20
50
21
-
0.9
-
0.8
24" Seat
28
43.75
18.5
26
23
20
53
23
-
0.9
-
0.8
Overall
Width
Overall
Depth
28
COM - YARDAGE REQUIREMENTS
21” & 24” - One Chair
21” & 24” -Two Chairs
21” & 24” - Three Chairs
30” Bariatric - One Chair
30” Bariatric - Two Chairs
30” Bariatric - Three Chairs
COM
COM
Yardage Yardage
Seat &
Seat
Back
Yardage
Seat & Back
Yardage
Seat
Yardage
Back
Yardage
Closed Arm Panel
4
1.3
3.1
1.2
2.1
6.1
3.1
6.2
9.3
0.9
2.1
0.9
1.8
2.6
2
4.2
2.2
4.4
6.6
COM
COM
Yardage Yardage
Back Closed Arm
Panel
0.8
1.6
0.8
1.2
1.6
Multiple yardage requirements can also be used for Patient Back Easy Access chairs and Patient Back Start, Centre, End Multiple seating.
Note: Some vinyls, leathers & fabrics may not be suitable for application on Solis seating.
The approval process is as follows:
1. A sample of the COM. must be provided to Krug Customer Service prior to or at the time of order.
For Maharam, Momentum or CF Stinson, Krug will obtain the fabric sample.
2. The sample will be reviewed and the customer advised if the fabric is unsuitable.
3. The COM. fabric or leather will be inspected when received at the factory, to identify any further concerns with its suitability.
FEATURES:
For a complete list of features see page 26.
SOLIS | PATIENT l UPHOLSTERED BACK
Solis Patient Chairs with Upholstered Backs are available in
21”, 24” and 30” widths.
SOLIS | PATIENT l MESH BACK
Solis Patient Chairs with Mesh Backs are available in 21” and
24” widths only.
HEALTHCARE | CANADA | 47
SOLIS | PATIENT, PATIENT BARIATRIC & OTTOMAN
COM
1
2
COL
3
4
771
859
794
882
817
905
863
951
910
998
21” Open Arm, Upholstered Back
SOL2-PU21OPU Urethane 810
SOL2-PU21OPW Beech
899
859
947
908
997
1007
1095
24” Open Arm, Mesh Back
SOL2-PM24OPU Urethane
SOL2-PM24OPW Beech
798
886
821
910
845
933
24” Open Arm, Upholstered Back
SOL2-PU24OPU Urethane 839
SOL2-PU24OPW Beech
927
889
977
30” Open Arm, Upholstered Back
SOL2-PU30OPU Urethane 1042
SOL2-PU30OPW Beech
1130
1115
1203
Arm Type
DESCRIPTION/MODEL
21” Open Arm, Mesh Back
SOL2-PM21OPU Urethane
SOL2-PM21OPW Beech
FABRIC GRADES
5
6
7
LEATHER
8
9
956
1044
1002
1090
1048
1137
1120
1208
1104
1192
1203
1291
1300
1388
1398
1486
1594
1682
891
979
937
1025
983
1072
1030
1118
1076
1164
1148
1236
937
1025
1035
1123
1133
1222
1230
1319
1330
1418
1428
1516
1624
1712
1186
1274
1331
1419
1476
1564
1621
1709
1765
1853
1910
1998
2199
2288
ORDERING NOTES: See page 29 for optional Ganging Bracket
DESCRIPTION/MODEL
Ottoman
SOL5
COM.
1
2
COL
3
4
FABRIC GRADES
5
6
370
385
400
430
460
7
489
LEATHER
8
9
W
519
549
609
D
H
18.25 18.25 13
Weight
Cubes
12
5
Fabric Yardage Required: 1 ottoman = 0.7 yards 2 ottoman = 1 yards
Easy Clean Backrest Cover, Mesh Back
SOL2-BCM21
76
84
90
SOL2-BCM24
76
84
90
104
104
118
118
134
134
148
148
160
160
178
178
20
23
0.5
0.5
8
8
3
3
0.9
0.9
Easy Clean Backrest Cover, Upholstered Back
SOL2-BCU21
76
84
90
104
SOL2-BCU24
76
84
90
104
118
118
134
134
148
148
160
160
178
178
20
23
0.5
0.5
8
8
3
3
0.9
0.9
3
6.75
3
0.9
Adjustable Headrest
SOL2-HRM
121
132
143
160
176
193
209
226
259
15
SOL2-HRU
121
132
143
160
176
193
209
226
259
Adjustable headrest are one size and can be used on all Patient Chair models.
Fabric Yardage Required: 1 headrest = 0.3 yards 2 headrest = 0.6 yards 3 headrest = 0.6 yards
ORDERING NOTES:
Complete Mesh backs (21” & 24”) can be ordered and field replaced. Casters are available on 21” and 24” guest chairs for an upcharge of
$55 list for 2 casters or $83 list for 4 casters. The standard Solis Frame Color is Silver Metallic. Additional frame colors are available for an
upcharge of $44 list per seat, please see page 4 for color selection and required ordering quantities. Silver metallic frames are available with
an anti-microbial finish for an upcharge of $44 list per chair or table. See page 26 for more information on options and features.
Solis Patient Option Upcharges
CAL 133 & Moisture Barrier (per yard)
Patient chair - Removable Seat Covers
21” & 24” - Removeable Back Covers
30” & 44” - Removable Back Covers
Kinetic Back option ( not available for Bariatric)
$ List
44
61
39
61
83
21” & 24” Cleanable Under-seat Splashguard
30” Cleanable Under-seat Splashguard
Maple Arm upgrade per arm (add to beech price)
Beech Wood Side Rails Upgrade (per chair)
Maple wood Side Rails Upgrade (per chair)
Closed Arm Panels (per chair) - please add the following up charges for closed arm panels.
Fabric Grades (COM) 1
2
(COL) 3
4
5
6
7
8
2 ARMS
291
311
331
369
409
448
487
527
9
605
PRODUCT CODE KEY
Line
Series
SOL
2
Solis
Chair
Chair Type
P
Patient Seating
Back Type
Size
U
21
Upholstered Back
M
Arm Type
OPW
Open Arm - Wood Arm
24
Mesh Back
21” & 24” Only
30
OPU
Open Arm
Urethane Arm
CLW
Closed Arm - Wood Arm
44
CLU
Closed Arm
Urethane Arm
48 | CANADA | HEALTHCARE
$ List
28
33
55
88
110
JORDAN | LEED CI CREDIT SUMMARY
y rammuS tiderC - IC DEEL
TNEITAP NADROJ
JORDAN PATIENT
MATERIAL CONTENT:
PRE-CONSUMER
RECYCLED CONTENT = 5.9%
24% Metal
22% Foam
POST-CONSUMER
RECYCLED CONTENT = 14.8%
10% Cardboard
8% Fabric
36% Wood
2.1 - 2.2
CONTRIBUTES
TO
CREDIT
3.3
Construction
Waste
CREDIT
4.1Management
Resource Reuse
CREDIT 4.5
CREDIT
RP
ER
:TNE2.1
TN-O2.2
C LAIRETAM
CREDIT
3.3
4.1
CREDIT 4.2
CREDIT 4.5
CREDIT
CREDIT
CONTRIBUTES TO
1-2 point(s)
1 point
1-2 point(s)
1 point
1 point
Recycled Content
1 point
1 point
Recycled Content
1 point
CREDIT 5.1
1 point
Low Emitting
Materials,
CREDIT
7
1 point
Systems & Seating
1 point
Regional Materials*
1 point
* This credit is only applicable if in total 20% of the combined value of the procurement of
construction materials
Certified Wood
1 point(s)
and in the furniture are manufactured within a radius of 500 miles. This credit will apply if the installation of the
(MUST BE REQUESTED)
CREDIT
CREDIT
OP
ER
Construction Waste Management
Resource Reuse
Recycled Content
Low Emitting Materials,
Systems & Seating
Regional Materials*
Certified Wood (MUST BE REQUESTED)
5.1
7
finished product occurs within 500 miles of Kitchener, Ontario.
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are
manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
etsaW noitcu rtsnoC
esueR ecruoseR
tnetnoC delcyceR
iretaM gnittimE woL
gnitaeS & smetsyS
*slairetaM lanoigeR
SUM( dooW deifitreC
2.2 - 1.2 TIDERC
3.3 TIDERC ®
1.4level
TIDERC
5.4 TIDERC
®
CERTIFICATION, AIR-EMISSIONS AND FSC CERTIFICATION
solutions@krug.ca | www.krug.ca | 1.888.578.KRUG
®
1.5
7
TIDERC
TIDERC
bmoc eht fo %02 latot ni fi elbacilppa ylno si tiderc sihT *
5 fo suidar a nihtiw derutcafunam era erutinruf eht ni dna
tnO ,renehctiK fo selim 005 nihtiw srucco tcudorp dehsinif
level CERTIFICATION
BIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degree
of sustainability of furniture. This standard evaluates product and company environmental attributes and
compliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &
Ecosystem Health and Social Responsibility. Jordan products have earned level®, BIFMA‘s sustainability
certification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONS
All Jordan products are supplied air-emissions certified. Contact customer service for information.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturing
facilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that the
growth, harvesting and production of goods are entirely achieved through responsible forestry, which guarantees
a healthy supply of forest resources for generations to come. Contact customer service for further information,
pricing and leadtimes.
.www | ac.gu rk@snoitulos
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve a
point from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) Rating
System.
HEALTHCARE | CANADA | 49
JORDAN | PATIENT & BARIATRIC
DIMENSIONS & COM REQUIREMENTS
Overall
Width
Overall
Depth
Overall
Height
Seat
Height
Height of
Arms from
Floor
Width
Between
Arms
Seat
Depth
Shipping
Weight
Cubes
21" Seat
25
27
43.5
18.5
26
20.5
19
47
17
24" Seat
28
27
43.5
18.5
26
23.5
19
51
22
30” Seat
34
27
43.5
18.5
26
29.5
19
62
28
Ottoman
20
18
11.5
14
5
COM - YARDAGE REQUIREMENTS
COM Yardage
COM Yardage
COM Yardage
COM Yardage
Seats & Backs Only
Seat Only
Back Only
Closed Arm Panel
21” & 24” - One Chair
21” & 24” - Two Chairs
21” & 24” - Three Chairs
21” & 24” - Four Chairs
2.2
4.2
6.3
8.4
0.9
1.3
2.2
2.6
1.9
3.8
5.7
7.6
0.9
1.35
1.8
2.7
30” Bariatric - One Chair
30” Bariatric - Two Chairs
30” Bariatric - Three Chairs
30” Bariatric - Four Chairs
3.1
6.2
9.3
12.4
0.9
1.8
2.7
3.6
2.21
4.5
6.7
9
0.9
1.35
1.8
2.7
Ottoman
0.66
Note: Some vinyls, leathers & upholsteries are not suitable for application on Jordan seating.
The approval process is as follows:
1. A sample of the COM must be provided to Krug Customer Service prior to or at the time of order.
For Maharam or Momentum, Krug will obtain the fabric sample.
2. The sample will be reviewed and the customer advised if the fabric is unsuitable.
3. The COM fabric or leather will be inspected when received at the factory, to identify any further concerns with its suitability.
JORDAN | PATIENT
21”
21” with headrest
24”
30” Bariatric
Ottoman
ORDERING NOTES:
Combination upholstery (more than one upholstery cover within the same unit) is an option on all Jordan upholstered products. When combination upholstery
is with upholstery of the same grade or COM, an upcharge for dual fabrics is $22 list per unit and $44 list per unit for three fabrics. When graded in
combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified
and a description of where each fabric is to be applied on the product in order to obtain a quote.
Jordan Patient Option Upcharges
CAL 133 & Moisture Barrier (per yard)
Patient chair - Removable Seat Covers
21” & 24” - Removeable Back Covers
30” - Removable Back Covers
Kinetic Back option ( not available for Bariatric)
$ List
44
61
61
99
83
WEIGHT CAPACITIES
Jordan weight capacities are as follows:
Patient Chairs (21” & 24”) - 350 lbs
Bariatric Patient Chair (30”) - 750 lbs
Jordan replacement parts can be viewed on-line at www.krug.ca
FEATURES:
For a complete list of features see page 31.
50 | CANADA | HEALTHCARE
$ List
21” & 24” Cleanable Under-seat Splashguard
30” Cleanable Under-seat Splashguard
Designer White -D354SL Solid Surface Arm Cap
28
33
165
JORDAN | PATIENT & BARIATRIC
DESCRIPTION/MODEL
21” Open Arm
JOR2-P21OPS
JOR2-P21OPS
Species
COM
1
2
COL
3
4
FABRIC GRADES
5
6
7
LEATHER
8
9
Beech
Maple
1003
1069
1096
1163
1190
1257
1351
1418
1510
1578
1671
1739
1831
1899
1992
2059
2233
2300
21” Open Arm Urethane Cap
JOR2-P21OPU
Beech
JOR2-P21OPU
Maple
1100
1166
1194
1260
1288
1354
1448
1515
1609
1675
1768
1836
1929
1996
2089
2156
2330
2397
21” Closed Arm
JOR2-P21CLS
JOR2-P21CLS
Beech
Maple
1088
1154
1182
1248
1276
1342
1435
1503
1596
1663
1756
1822
1917
1983
2077
2144
2317
2385
21” Closed Arm Urethane Cap
JOR2-P21CLU
Beech
JOR2-P21CLU
Maple
1185
1252
1279
1345
1373
1439
1532
1599
1693
1760
1853
1921
2014
2080
2174
2241
2416
2482
24” Open Arm
JOR2-P24OPS
JOR2-P24OPS
Beech
Maple
1033
1101
1129
1198
1225
1294
1391
1461
1556
1625
1721
1790
1886
1956
2052
2121
2299
2369
24” Open Arm Urethane Cap
JOR2-P24OPU
Beech
JOR2-P24OPU
Maple
1133
1202
1229
1298
1326
1395
1491
1560
1657
1725
1821
1891
1988
2055
2152
2222
2399
2469
24” Closed Arm
JOR2-P24CLS
JOR2-P24CLS
Beech
Maple
1121
1189
1217
1286
1314
1381
1478
1547
1644
1712
1809
1878
1975
2043
2139
2208
2387
2456
24” Closed Arm Urethane Cap
JOR2-P24CLU
Beech
JOR2-P24CLU
Maple
1220
1290
1317
1386
1413
1482
1579
1646
1744
1813
1908
1978
2075
2141
2239
2309
2488
2557
ORDERING NOTES:
Combination upholstery (more than one upholstery cover within the same unit) is an option on all Jordan upholstered products. When combination upholstery
is with upholstery of the same grade or COM, an upcharge for dual fabrics is $22 list per unit and $44 list per unit for three fabrics. When graded in
combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified
and a description of where each fabric is to be applied on the product in order to obtain a quote.
Jordan Patient Option Upcharges
$ List
CAL 133 & Moisture Barrier (per yard)
Patient chair - Removable Seat Covers
21” & 24” - Removeable Back Covers
30” - Removable Back Covers
Kinetic Back option ( not available for Bariatric)
44
61
61
99
83
$ List
21” & 24” Cleanable Under-seat Splashguard
30” Cleanable Under-seat Splashguard
Designer White -D354SL Solid Surface Arm Cap
28
33
165
PRODUCT CODE KEY
Line
Series
Chair Type
Size
JOR
2
P
21
Jordan
Chair
Patient Seating
Arm Type
OPS
Open Arm
24
OPU
Open Arm
Urethane Arm Cap
30
CLS
Closed Arm
CLU
Closed Arm
Urethane Arm Cap
HEALTHCARE | CANADA | 51
JORDAN | PATIENT & BARIATRIC
DESCRIPTION/MODEL
Species
COM
1
COL
3
2
FABRIC GRADES
5
6
4
7
LEATHER
8
9
30” Open Arm
JOR2-P30OPS
Beech
1224
1316
1410
1571
1731
1892
2052
2213
2453
JOR2-P30OPS
Maple
1290
1384
1477
1638
1798
1959
2119
2280
2520
30” Open Arm Urethane Cap
Beech
JOR2-P30OPU
1321
1415
1508
1668
1829
1989
2150
2310
2550
Maple
1387
1481
1574
1735
1895
2056
2216
2377
2617
Beech
Maple
1309
1375
1402
1469
1496
1562
1656
1723
1817
1883
1977
2043
2138
2204
2298
2365
2538
2605
30” Closed Arm Urethane Cap
JOR2-P30CLU
Beech
JOR2-P30CLU
Maple
1406
1476
1499
1566
1593
1659
1753
1819
1914
1980
2074
2141
2235
2301
2395
2462
2636
2702
JOR2-P30OPU
30” Closed Arm
JOR2-P30CLS
JOR2-P30CLS
ORDERING NOTES:
Combination upholstery (more than one upholstery cover within the same unit) is an option on all Jordan upholstered products. When combination
upholstery is with upholstery of the same grade or COM, an upcharge for dual fabrics is $22 list per unit and $44 list per unit for three fabrics. When graded in
combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote - please provide the fabrics
specified and a description of where each fabric is to be applied on the product in order to obtain a quote.
Jordan Patient Option Upcharges
$ List
CAL 133 & Moisture Barrier (per yard)
Patient chair - Removable Seat Covers
21” & 24” - Removeable Back Covers
30” - Removable Back Covers
$ List
44
61
61
99
21” & 24” Cleanable Under-seat Splashguard
30” Cleanable Under-seat Splashguard
Designer White -D354SL Solid Surface Arm Cap
28
33
165
PRODUCT CODE KEY
Line
Series
Chair Type
Size
21
JOR
2
P
Jordan
Chair
Patient Seating
Arm Type
OPS
Open Arm
OPU
24
Open Arm
Urethane Arm Cap
30
CLS
Closed Arm
CLU
Closed Arm
Urethane Arm Cap
2
COL
3
4
21” Adjustable Headrest
JOR2-RHR21
227
261
281
301
321
24” Adjustable Headrest
JOR2-RHR24
250
287
309
331
30” Bariatric Patient Headrest
JOR2-RHR30
299
342
368
Ottoman
JOR-5 Beech
Maple
508
542
DESCRIPTION/MODEL
COM
1
467
502
488
521
FABRIC GRADES
5
6
7
LEATHER
8
9
342
361
381
408
0.9
2.3
0.9
353
376
398
419
449
0.9
2.3
0.9
394
420
447
473
499
534
0.9
2.3
0.9
529
561
548
582
569
602
589
622
609
642
642
676
0.66
0.66
14
14
5
5
ORDERING NOTE: Ottoman is not available on KrugExpress.
52 | CANADA | HEALTHCARE
Fabric
Yardage
Shipping
Weight
Cubes
Ver. 1
2015
PCHEALTHCDN2015
Printed in Canada
All products are air emissions certified and are available as FSC® certified
solutions@krug.ca | www.krug.ca | 1.888.578.KRUG
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising