ca_M1-M12R1.qxd:Bottom Page 8 2/17/13 7:29 PM Page...

ca_M1-M12R1.qxd:Bottom Page 8  2/17/13  7:29 PM  Page...
ca_M1-M12R1.qxd:Bottom Page 8
2/17/13
7:29 PM
Page 1
ca_M1-M12R1.qxd:Bottom Page 8
2/17/13
7:29 PM
Page 5
PowerLock Line Source
Line Source is the connector with a male contact which is normally connected to the source of the power. The contacts are fitted with a plastic end cap that prevents accidental finger touching of live parts of the connector and
meets IP2X requirements. Different contacts are available to suit cable conductors from 25 mm2 to 300 mm2.
Connectors rated either 400 amp or 660 amp, can be fitted to a wide range of copper cables, and to aluminium cables on request.
The 400 amp connectors use a standard set-screw contact suitable for 120mm2
conductors; when using smaller conductors a range of reduction sleeves are
available to order separately that can be used with cables down to 25mm2, see page
M-2 for further information.
660 amp contacts are crimped using industry standard crimping tools and dies, a
range of contacts are available to suit cables from 35mm2 to 300mm2
A Sliding Collar can be factory fitted to the source
connector which allows a pair of connectors to be
disconnected without the use of a separate release key.
Rubber hand grips are available that fit over the ribbed
section of the main insulator body, these grips assist
with the handling of the connectors when being used
in difficult conditions.
Order suffix = HG
Order suffix = SC
Ordering information – see page M-2 for full details of the options available
Example part number:
NLS-1-BN-S120-M40A
NLS – X – XX – XXXX – MXXX – XX
Line & Color
Contact
Cable Gland
Special Options
HG
SC
Dimensions shown in inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
M-5
Hand Grip
Sliding Collar
VEAM Powerlock
Cable glands meeting IP67 requirements are fitted to the connectors, 4 sizes are available that cover a range of
cables with outside diameters from 15mm to 38mm. When selecting the M50 gland, please note that this is
supplied with an adaptor (not shown above) that steps the connector up from M40 to M50.
M
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising