BEA LE Package 2007 Door Control Recommended Low Energy Best Solution
Below you will find brief information for Door Control LE Package 2007. This is a door control system that can be used for a variety of applications. The system is designed to be easy to install and operate, and it is compatible with a variety of door types. The system features a built-in transformer, a safety switch, and a stall switch.
Advertisement
Advertisement
Advertisement
Key features
- Easy to install and operate
- Compatible with a variety of door types
- Built-in transformer
- Safety switch
- Stall switch
Frequently asked questions
The Aux input is required for initial activation. The knowing act switch should be connected to the Aux input and can be any dry contact device such as a pushplate, wireless transmitter/receiver, card reader, etc.
The BODYGUARD relay should be programmed to value 2. Refer to the LO-LINX user guide for further instructions.
The SUPERSCAN harness can be plugged into either connector. However, SUPERSCAN DOOR 1 relates to STALL 1 input and SUPERSCAN DOOR 2 relates to STALL 2 input. Each input handles the activation and stall for the respective door. SUPERSCANS on the approach side are used for secondary activation only and will not allow activation when the door is fully closed. The EAGLE may be substituted in lieu of the approach side SUPERSCAN.