RIXSON Floor Closer

RIXSON Floor Closer
Shallow Depth
Floor Closers
Complete Premium Door Control for
Medium-Duty Interior Doors Where
Concealment is Desired
SHALLOW DEPTH Floor Closers
Table of Contents
General Information........................................................................................................................................................................ 3
How to Select Product...................................................................................................................................................................... 4
Options....................................................................................................................................................................................... 5-6
Certifications................................................................................................................................................................................... 6
Limited Warranty............................................................................................................................................................................ 6
Specifications.................................................................................................................................................................................. 6
Offset Hung Floor Closer
51 Offset Floor Closer ......................................................................................................................................................... 7
F53 Closer Independently Hung – Hanging Means by Others .................................................................................................... 8
Q51/QT51 Closer with Quick Install™ Mounting 1-3/4 Door .................................................................................................. 9
HM51 Closer with Butts for Hollow Metal Installations 1-3/4 Door ............................................................................................. 10
Intermediate Pivots
M19/M190..................................................................................................................................................................... 11
Pocket Pivot
F519............................................................................................................................................................................... 11
Single Acting Center Hung Floor Closer
50 x 554 Closer with Flat Low Profile Arm ............................................................................................................................. 12
50 Closer with Arm Centering Screws ................................................................................................................................... 13
5040 Closer with Patch Fittings ........................................................................................................................................... 14
Double Acting Center Hung Floor Closer
5020 Double Acting Floor Closer ......................................................................................................................................... 15
Optional Center Hung Top Pivot
345................................................................................................................................................................................ 16
Quick Reference of Options .......................................................................................................................................................... 17
How to Order............................................................................................................................................................................... 17
Parts Drawings ........................................................................................................................................................................ 18-23
2
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
SHALLOW DEPTH Floor Closers
GENERAL INFORMATION
Floor closers provide the best mechanical means to support and control a door. They are designed to work with the laws of physics to
provide long-lasting performance and reliability. The Rixson® shallow depth floor closers are recommended for low to moderate traffic
interior doors, where traditional floor closer depth is too great for slab construction. Not recommended for high-traffic or exterior doors.
The weight of the door is supported by bottom arm and floor
• Uses laws of gravity to its advantage
• Door swings with less resistance
• Reduced stress on frame
• Fasteners are in shear, not tension
• Eliminates door sag
• Vertically adjustable
• Thrust bearing supports vertical load
• Needle bearings for lateral forces
Bushings
Interchangeable spindle adapters
• Up to 2" longer than standard in 1/2" increments
Bottom arm directly attached to closer spindle
Bottom Arm
•A
mechanical advantage that increases efficiency
insuring that ICC/ANSI A117.1 compliant, lower
opening forces will still close the door
•O
ne to one ratio of door swing to spindle rotation
makes control more precise
Interchangeable
• Floor closers are more efficient than a regular
Spindle Adapter
arm surface closer
Advantages of concealed floor closers
•A
esthetics – let the beauty of the door and its
surroundings take center stage
• Vandal resistant – mechanism not exposed
• The solution for arch top doors – offset floor closers
•B
oth mechanical advantages and aesthetics –
a concealed floor closer exclusive
Needle Bearing
Many different models to choose from
• Use
standard product with a top pivot for the
best efficiency
•U
se a quick install (Q) model to facilitate easy closer
removal
•U
se model HM with 3/4" offset hinges for hollow metal
doors and frames prepared for 4-1/2" hinges
•C
loser can be offset hung, center hung or independently
hung, single acting or double acting (center hung only)
Thrust Bearing
51 Closer with 180 Top
Pivot and M19 Intermediate
Pivot (recommended)
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
3
SHALLOW DEPTH Floor Closers
HOW TO SELECT PRODUCT
1. Offset vs. Center Hung Application
3/4" Offset
1-1/2" Offset
Center Hung
Pivot point located 3/4" from the heel edge
of the door and 3/4" from face of door.
Pivot point located 3/4" from the heel edge
of the door and 1-1/2" from face of door.
Used on doors with cladding on face or trim
on frame
Pivot point centered in thickness of door.
Distance from heel edge can vary 2-3/4
and up (not for use on fire rated doors)
2. Size of Door (width, height, thickness)
Estimated door weights pounds per square foot (PSF)
Door Thickness
Door Material
1-3/4"
2-1/4"
3"
Hollow Metal
6.5
7
—
Solid Core Wood
7
9
11.5
Aluminum/Glass Storefront
3.5
4
—
MDF
7
9
11.5
Glass Thickness
Tempered Glass
3/8"
1/2"
3/4"
5
7
9.75
Cladding Material
Wood
3
3/4" Cladding
Example: 3/6 X 8/0 X 1/2" Tempered Glass Door
Door: 28sq ft x 7lb./sq ft = 196lbs
Example: 3/0 X 7/0 X 1-3/4"
Door: 21sq ft x 7lb.sq ft = 147lbs
For doors of other sizes consult factory
3. Expected Frequency of Door Operation
Application
Large department store entrance
Large office building entrance
Theater entrance
School entrance
School restroom door
Store or bank entrance
Office building restroom door
DailyYearly
5,000
4,000
1,000
1,250
1,250
500
400
School corridor door
Office building corridor door
Store restroom door
Residential entrance door
80
75
60
40
Residential restroom door
Residential hallway door
Residential closet door
25
10
6
4
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
1,500,000
1,200,000
365,000
225,000
225,000
150,000
118,000
High
(Use heavy
weight product)
15,000
22,000
Average
18,000
15,000
9,000
3,600
2,200
Low
SHALLOW DEPTH Floor Closers
OPTIONS
Delayed Action – Prefix DA
After full open permits door to remain ajar (at 70 degrees) for
up to 40 seconds. Operates by separate valve and can be
shut off if not needed. Not available on closers with hold open
feature. Closers with DA feature do not have backcheck.
Physically Handicapped – Prefix PH
To comply with ICC/ANSI A117.1 and guidelines established
by the Americans with Disabilities Act, PH prefix indicates 5
pounds of opening force, based at 30" from centerline of pivot.
PH closers may not be used on labeled fire doors. Rixson®
accepts no responsibility for PH closers and door latching. Also,
be advised that ADA guidelines DO NOT apply to fire rated
openings or exterior doors.
Wood Door – Prefix W
When using a center hung product with the centering arm
(e.g., 5010 and 5020) a special plate and less obtrusive
adjusting screws are needed for wood doors. This plate is
reinforcement for the deep mortise required for that arm,
protecting the veneer.
Less All Parts – Suffix LAP
If closer is needed for replacement, the arm, cover, cement case,
top pivot and floor plate are omitted.
Less Floor Plate – Suffix LFP
When thresholds or cover pans are being used the closer doesn't
need the decorative floor plate.
Less Cement Case – Suffix LCC
For existing installations or when cement case has been sent earlier
in construction. Closer will be packaged without the cement case.
Less Top Pivot – Suffix LTP
For unusual head conditions where the top pivot cannot be used,
the closer is shipped without the top pivot. For offset installations
an additional load bearing intermediate (side jamb) M190 pivot
is required. All intermediate pivots for that opening should be
M190's, not M19's.
Fire Rated – Prefix F
Closer packages for fire rated doors (up to 3 hours) include
a steel top pivot and must have additional steel intermediate
pivots. These closers are non-hold open.
Twenty Minute Label – Suffix -20
This UL rating is for 20-minute doors. Pivots are brass-based
material and include a visible label.
How to Determine Hand of Door
Left Hand
Right Hand
Face a door swinging open away from you. If it opens to the
right, it is right handed. If it opens to the left, it is left handed.
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
5
SHALLOW DEPTH Floor Closers
OPTIONS
Non Hold Open – Suffix NBC
These closers do not hold the door open. This feature cannot be
changed in the field.
Automatic Hold Open – Suffix ABC
These closers hold the door open. This feature cannot be changed in
the field. Specify 90°, 105° or 180°.
Hand – Suffix RH or LH
All single acting floor closers are handed. All double acting floor
closers (5020) are non-handed.
Extended Spindle – Suffix Extra Length
Any special coverings or severe door undercuts will require an
extended spindle. See product template to determine if an extended
spindle is needed. Extended spindles are available in 1/2"
increments up to 2" longer than standard.
1-1/2" Offset – Suffix 1-1/2
Offset is the distance from the face of the door to the pivot point.
Extended offsets should not be used unless there is cladding on
the face of the door or there is trim to clear on the frame. 1-1/2"
offset arms and pivots are for doors with cladding or trim that
project 3/4" from the face of the door.
Cover Pan (Terrazzo) – Suffix Part Number
Closers should always be accessible. They should never be
buried beneath flooring materials. A cover pan sits on top of the
closer and has the flooring material set in it. This way the sight
line for the floor is consistent. Cover pans may require closers
with longer spindles. See cover pan template to determine
spindle length needed.
Special Layouts – Suffix SPLO#
Unique installations or specially engineered products are called
special layouts. These numbers must be assigned by the technical
support department and they must be called out specifically by
their number when ordered.
certifications
All Rixson® shallow depth floor closers conform to ANSI/BHMA A156.4 Standards. See individual products for sub sections.
limited warranty
Rixson® shallow depth floor closers, models 50, 51 and F53 are warranted for 2 years against defect. See Rixson® Price Book for
specific details of the limited warranty.
specification
Interior door floor closers shall be models 50 (center hung), 51 (offset hung) or F53 (independently hung). These closers shall have
separate and independent checking valves to control latch speed, closing speed and adjustable hydraulic backcheck. All closers shall
have a minimum of two bearings internal to the closer. One shall be a thrust bearing and the other a needle bearing. Separate bearing
surfaces shall be in the top pivot. Closers shall have cases no more that 2" deep. Fire rated model F51 shall have steel top pivots. Male
spindle assemblies shall have removable spindle adapters, changeable in the field.
6
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
SHALLOW DEPTH Floor Closers
3/4" offset hung
Model 51
Application
Product Description & Features
• Single Acting, Handed
• Interior Doors
• Weight to 250 lbs.*
• Door Width up to 4'0"
(1219mm)
• Interchangeable spindle adapters
• Allows doors to swing 180°, trim permitting
Technical Information
Frame stop required
• Separate and independent valves for closing speed, latch speed and backcheck
• Available non-hold open (NBC) or automatic hold open (ABC) specify 90°, 105° or 180°
• Doors will swing 5° beyond hold open point
• Delayed action option – prefix ”DA” (non-hold
open only). Closer will not have backcheck
• Order
ANSI/C06041/C06051
spring sizes 3 through 5:
Model
Door Width
5103 36" (914mm)
5104
42" (1067mm)
5105
48" (1219mm)
• Models available to meet ICC/ANSI A117.1 low opening force requirements. Prefix “PH”
Model
Door Width
PH5102
42" (1067mm)
PH5103
48" (1219mm)
• Available with floor plate or threshold
installation (floor plate shown)
*D
oor size & weight guidelines
are determined using the
appropriate number of
intermediate pivots­
• Available 1-1/2" offset, for doors with cladding or frames with applied molding. Maximum door weight 175 lbs
• Cycolac, rustproof cement case
• Vertical door adjustment
• Standard top pivot #180 included
• For arch top doors or applications where a
180 top pivot cannot be used, supply at least
two each M190 load bearing intermediate
pivots, mounted together at the top of the
vertical edge
Bevel door 1/8" in 2"
• Intermediate pivot recommended: M19
(order separately), see page 11
• Doors up to 90" (2286mm) in height should use one intermediate pivot. Each additional 30" (762mm) warrants another intermediate pivot
• For fire rated openings (up to 3 hour
assemblies) prefix “F”. This package will be
supplied with a steel top pivot (F180) and
a non-hold open closer. Intermediate pivot
required: FM19, order separately, see page
11
• For 20-minute label doors – suffix “-20” to the
part number
• Furnished with wood and machine screws
• Extended spindles available in 1/2"
increments up to 2" longer than standard
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
7
SHALLOW DEPTH Floor Closers
INDEPENDENTLY HUNG
Model F53 Application
Product Description & Features
Technical Information
•
•
•
•
Used as a concealed floor closer for
independently hung doors i.e. butt hinges,
pocket pivots, etc.
Frame stop required
Door shown parallel to frame
Single Acting, Handed
Interior Doors
Door Width up to 4'0" (1219mm)
Weight to 250lb
• Closer does not support weight of door
Note: Hanging means used must be specified
when ordering. Check product template. If
your hanging means are not listed, contact
factory for special layout and pricing
• Interchangeable spindle adapters
• Auxiliary stop recommended
• Includes closer, mortised rail and arm
with slider
ANSI/C06031
•S
eparate and independent valves for closing
speed, latch speed and backcheck.
• Not available in “PH” “DA” or hold open
• Order spring sizes 3 through 5:
Model
F5303
F5304
F5305
Door Width
36" (914mm)
42" (1067mm)
48" (1219mm)
*”A” determined by door
hanging means
• F loor plate standard. For threshold
applications a 1/2" extended spindle is
required
• Cycolac rustproof cement case
• T his closer carries a UL listing for 3-hour fire
door assemblies. Fire rated hanging means
required
• Furnished with wood and machine screws
•E
xtended spindles available in 1/2"
increments up to 2" longer than standard
• Maximum swing 90°
Model F5310 Application
Product Description & Features
• Single Acting, Handed
• Interior Doors
• Door Width up to 4'0"
(1219mm)
Identical to Model F53 except:
F or use in 90° pocket door installations where
closer is located in the pocket. Can only be
used with F519 pocket pivots
•S
pecially milled spindle allows positive
latch speed control
ANSI/C06031
8
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
Technical Information
Door shown
perpendicular
to frame
SHALLOW DEPTH Floor Closers
3/4" OFFSET HUNG
Model Q51/QT51
Application
•
•
•
•
•
Single Acting, Handed
Interior Doors
Weight to 250 lbs.*
Door Width up to 4'0" (1219mm)
1-3/4" thick only
ANSI/C06041/C06051
*Door size and weight guidelines are
determined using the appropriate
number of intermediate pivots
Product Description & Features
Surface attached bottom arm allows closer
removal without demounting door.
• “Q” closers have a floor plate (shown)
• For threshold applications prefix “QT” no floor plate will be supplied
• 3/4" offset only
• Interchangeable spindle adapters
• Mortise arm with thru bolt attachment
• Increased depth of cement case for easy closer
removal
•S
eparate and independent valves for closing
speed, latch speed and backcheck
•A
vailable non-hold open (NBC) or automatic
hold-open (ABC) specify 90° or 105°
•Doors will swing 5° beyond hold open point
•D
elayed-action option – prefix “DA”
(non-hold open only). Closer will not have
backcheck
• Order spring sizes 3 through 5
ModelDoor Width
Q (QT) 5103
36" (914mm)
Q (QT) 5104
42" (1067mm)
Q (QT) 5105
48" (1219mm)
•M
odels available to meet ICC/ANSI A117.1
low opening force requirements. Prefix “PH”
ModelDoor Width
PHQ (QT) 5102
42" (1067mm)
PHQ (QT) 5103
48" (1219mm)
• Cycolac, rustproof cement case
• Vertical door adjustment
•S
tandard top pivot #180 included
• For arch top doors, consult factory
•O
ne M19 intermediate pivot included.
Note: Closer cannot be ordered without the
intermediate pivot
•D
oors up to 90" (2286mm) in height
should use one intermediate pivot (included).
Each additional 30" (762mm) warrants
another intermediate pivot
• F or fire rated openings (up to 3 hour
assemblies), prefix “F”. This package will be
supplied with a steel top pivot (F180), one
intermediate pivot (FM19) and a non-hold
open closer
• For 20-minute label doors suffix “20” to the part number
• Furnished with machine and wood screws
•E
xtended spindles available in 1/2"
increments up to 2" longer than standard
Technical Information
Frame stop required
Bevel door 1/8" in 2"
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
9
SHALLOW DEPTH Floor Closers
3/4" OFFSET HUNG
Model HM51
Application
Product Description & Features
Technical Information
•
•
•
•
•
Designed for stock hollow metal doors and
frames with standard weight 4-1/2" hinge
preparation.
Frame stop required
Single Acting, Handed
Interior Doors
1-3/4" Hollow Metal Doors & Frames
Weight to 250 lbs.
Door Width up to 4'0" (1219mm)
• Interchangeable spindle adapters
• Includes three special steel 4-1/2" ball
bearing standard weight hinges with 3/4"
offset. Doors over 90" in height warrant an
additional hinge
• Surface mounted bottom arm with thru bolts
•S
eparate and independent valves for
closing speed, latch speed and backcheck
•A
vailable non-hold open (NBC) or
automatic hold open (ABC) specify 90° or
105°
•Doors will swing 5° beyond hold open point
•D
elayed action option – prefix ”DA”
(non-hold open closers only). Closer will not
have backcheck
• Order spring sizes 3 through 5:
ModelDoor Width
HM5103
36" (914mm)
HM5104
42" (1067mm)
HM5105
48" (1219mm)
•M
odels available to meet ICC/ANSI
A117.1 low opening force requirements.
Prefix “PH”
ModelDoor Width
PHHM5102
42" (1067mm)
PHHM5103
48" (1219mm)
ANSI/C06041/C06051
•A
vailable with floor plate or threshold
installation (floor plate shown)
• Cycolac, rust proof cement case
• F or fire rated openings (up to 3-hour
assemblies), prefix “F”. This package will be
supplied with three steel hinges and a nonhold open closer
• F urnished with 1/2 wood and full
machine screws
•E
xtended spindles available in 1/2"
increments up to 2" longer than standard
10
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
(3 supplied)
Bevel door 1/8" in 2"
SHALLOW DEPTH Floor Closers
INTERMEDIATE PIVOTS
Model M19/M190
Application
Product Description & Features
• Full Mortise
• Handed
•M19, bushing, not load bearing
Technical Information
•M190, needle bearing, load bearing
•Maintains door alignment
•Aids in installing closers and bottom pivots
•Non ferrous base material
•3/4" (19mm) offset standard
•Available in 1-1/2" (38mm) offset
•Available for fire door assemblies (ferrous
material) specify FM19 or FM190
ANSI/C07321/C07371
•Doors up to 90" (2286mm) in height should
use one intermediate pivot. Each additional
30" (762mm) warrants another intermediate
pivot
1-1/8
(29)
•For 20-minute label suffix "-20" to the part
number
•Furnished with wood and machine screws
•For arch top doors or applications where a
180 top pivot cannot be used, supply at least
two each M190 load bearing intermediate
pivots, mounted together at the top of the
vertical edge
Model F519
Application
Product Description & Features
• Pocket Door Pivot
• Non-Handed
•Full mortise, non-handed pivot for pocket
door applications
Technical Information
•Heavy-duty steel pivot with ball bearings
•Allows doors to swing 90°
•Minimum three pocket pivots per door
•Doors over 90" (2286mm) in height require
four pocket pivots. Each additional 30"
(762mm) warrants another pocket pivot
•UL listed for all labeled pocket fire-door
assemblies up to and including 3 hours
•Fire-rated door assemblies must have been
tested with pocket pivots
•Furnished with wood and machine screws
ANSI/A8911/C07611
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
11
SHALLOW DEPTH Floor Closers
SINGLE ACTING CENTER HUNG
Model 50 x 554 Arm
Application
Product Description & Features
Technical Information
•
•
•
•
•
oncealed arm is designed to eliminate
C
visible adjusting screws on face of door
Frame stop required at lock edge
Single Acting, Handed
Interior Doors
Concealed Arm
Weight to 250 lbs.
Door Sizes up to 4'0" x 8'0"
(1219 x 2438mm)
•A
rm bolt locks arm to closer spindle –
adjustment made through heel of door
• Interchangeable spindle adapters
•S
eparate and independent valves for closing
speed, latch speed and backcheck
•A
vailable non-hold open (NBC) or automatic
hold open (ABC) specify 90° or 105°
•D
elayed action option – prefix ”DA”
(non-hold open only) closer will not have
backcheck
• Order spring sizes 3 through 5:
ANSI/C06021
Model
5013 x 554
5014 x 554
5015 x 554
Door Width
36" (914mm)
42" (1067mm)
48" (1219mm)
•M
odels available to meet ICC/ANSI
A117.1 low opening force requirements.
Prefix “PH”
Model
PH5012 x 554
PH5013 x 554
Door Width
42" (1067mm)
48" (1219mm)
•A
vailable with floor plate or threshold
installation (floor plate shown)
• Cycolac, rustproof cement case
• Standard top pivot #340 included
• Not allowed for fire rated doors
• F rame stop required at lock edge. If not
supplied by frame manufacturer, recommend
use of 60131 (see Door Control Accessories,
page 8)
• Furnished with wood and machine screws
•E
xtended spindles available in 1/2"
increments up to 2" longer than standard
12
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
Door edges must be radiused
SHALLOW DEPTH Floor Closers
Single Acting Center hung
MODEL 50
Application
Product Description & Features
Technical Information
•
•
•
•
•
•C
entering arm with adjustment screws in
faces of door
Frame stop required at lock edge
Single Acting, Handed
Interior Doors
Centering Arm
Weight to 250 lbs.
Door Sizes up to 4'0" x 8'0"
(1219 x 2438mm)
• Interchangeable spindle adapters
•S
eparate and independent valves for closing
speed, latch speed and backcheck
•A
vailable non-hold open (NBC) or automatic
hold open (ABC) specify 90° or 105°
•D
elayed action option – prefix ”DA” (nonhold open only). Closers will not have
backcheck
• Order spring sizes 3 through 5:
ANSI/CO6022
Model
5013
5014
5015
Door Width
36" (914mm)
42" (1067mm)
48" (1219mm)
•M
odels available to meet ICC/ANSI
A117.1 low opening force requirements.
Prefix “PH”
Model
PH5012
PH5013
Door Width
42" (1067mm)
48" (1219mm)
•A
vailable with floor plate or threshold
installation (floor plate shown)
• Cycolac, rustproof cement case
•A
rm reinforcement bracket for wood
doors prefix “W”
Door edges must be radiused
• Standard top pivot #340 included
• Not allowed for fire rated doors
• F rame stop required at lock edge. If
not supplied by frame manufacturer,
recommend use of 60131 (see Door Control
Accessories, page 8)
• Furnished with wood and machine screws
•E
xtended spindles available in 1/2"
increments up to 2" longer than standard
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
13
SHALLOW DEPTH Floor Closers
SINGLE ACTING CENTER HUNG
Model 5040
Application
Product Description & Features
Technical Information
•
•
•
•
•
• T op and bottom patch fittings for tempered
glass doors 3/8" - 1/2" thick
Frame stop required at lock edge
Single Acting, Handed
Interior Doors
Full Glass Doors
Weight to 200 lbs.
Door Sizes 3'6" x 8'0"
• Interchangeable spindle adapters
•S
eparate and independent valves for
closing speed, latch speed and backcheck
•A
vailable non-hold open (NBC) or automatic
hold open (ABC) specify 90° or 105°
•D
elayed action option – prefix ”DA” (nonhold open only). Closers will not have
backchecks. Not recommended for full glass
doors
• Order spring sizes 3 and 4:
Model
5043
5044
Door Width
36" (914mm)
42" (1067mm)
•M
odels available to meet ICC/ANSI
A117.1 opening force requirements. Prefix
“PH”
Model
PH5042
Door Width
42" (1067mm)
• F loor plate standard. For threshold
application, an extended spindle is required
(floor plate shown). There is no vertical
adjustment
• Cycolac rustproof cement case
• Special top pivot included
• F or extended spindles contact factory
•A
vailable in 605, 629 & 630 finishes
14
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
SHALLOW DEPTH Floor Closers
DOUBLE ACTING CENTER HUNG
Model 5020
Application
• Double Acting, Non-Handed
• Interior Doors
• Weight to 250 lbs.
• Door Sizes up to 4'0"x 8'0"
(1219 x 2438mm)
Product Description & Features
Technical Information
•Centering arm with adjustment screws in
faces of door (critical for double acting
doors)
•Interchangeable spindle adapters
•Separate and independent valves for
closing speed, latch speed and backcheck
•A
vailable non-hold open (NBC) or automatic
hold open (ABC) specify 90°, 105°
• Door may only swing 130° in either direction
• Delayed action option – prefix ”DA” (nonhold open only). Closers will not have
backcheck
• Auxiliary stop required
• Order spring sizes 3 through 5:
ANSI/CO6012
Model
5023 5024 5025
Door Width
36" (914mm)
42" (1067mm)
48" (1219mm)
•M
odels available to meet ICC/ANSI
A117.1 low opening force requirements.
Prefix “PH”
Model
PH5022
PH5023
Door Width
42" (1067mm)
48" (1219mm)
Door edges must be radiused
•A
vailable with floor plate or threshold
installation (floor plate shown)
• Cycolac, rustproof cement case
•A
rm reinforcement bracket for wood
doors – prefix “W”
• Standard top pivot #340 included
• Not allowed for fire rated doors
• Furnished with wood and machine screws
•E
xtended spindles available in 1/2"
increments up to 2" longer than standard
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
15
SHALLOW DEPTH Floor Closers
OPTIONAL CENTER HUNG TOP PIVOT
Model 345
Application
Product Description & Features
•
•
•
•
•
• Ideal for locations where there is a fear that
dramatic building settling is possible. Also,
for doors 8'0" - 9'0" in height
Fully Concealed
Center Hung
Non-handed
Earthquake Tolerant
Taller Doors
• Long pivot pin engages in top of door
1-3/4" (44mm).
Technical Information
Jamb portion
• Can be used with any center hung floor
closer. Order the closer LTP (less top pivot)
and the 345 top pivot separately
• Walking beam-type pivot – 1/2" (13mm) diameter pivot pin
• Oil-impregnated sintered bronze bearing
• Completely concealed when door is closed
• Furnished with wood and machine screws
ANSI/CO7021
16
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
Door portion
SHALLOW DEPTH Floor Closers
QUICK REFERENCE OF OPTIONS/HOW TO ORDER
REFERENCE
Prefix
Model
Degree if
Hold Open
Holding Options
General Options
Handed
Maximum Weight*
DA, PH, F
51
90,105,180
NBC, ABC
Ext Spdl, 1-1/2 OS, -20
Yes
250
F53
NBC
Extended Spindle
Yes
250
F531
NBC
Extended Spindle
Yes
250
DA, PH, F
Q/QT51
90,105
NBC, ABC
Ext Spdl, -20
Yes
250
DA, PH, F
HM51
90, 105
NBC, ABC
Extended Spindle
Yes
250
DA, PH
50
90,105
NBC, ABC
Extended Spindle
Yes
250
DA, PH
5040
90,105
NBC, ABC
Extended Spindle
Yes
250
DA, PH
5020
90,105
NBC, ABC
Extended Spindle
No
250
*Offset closer weight are for 3/4" and the use of an intermediate pivot.
HOW TO ORDER
PH
Prefix
510
Model
DA Delayed Action
PH Lighter Spring (ADA)
W Wd Dr (center hung)
F Fire Rated Doors — not available with PH
3
Spring Size
2
3
4
5
510Offset
501 Center Hung Single Act
F530 Independently Hung* Parallel to Frame
F531 Independently Hung* Perpendicular to Frame
504 Center Hung Single Act with Patch Fitting
502 Center Hung Double Act
Q/QT510 Quick Install
HM510
Hollow Metal Door and Frame
*Hanging means must be noted on
purchase order.
NBC
Non-Hold Open
NBC Non-Hold Open
90ABC Automatic Hold Open
105ABC Automatic Hold Open
180ABC Automatic Hold Open
x 1/2" Ext Spdl
Suffix
554 —
-20 LAP LFP
LCC LTP —
SPLO x LH
Hand
Concealed Arm
Extended Spindles 1-1/2” Offset
20 Minute Label
Closer Body Only
Less Floor Plate
Less Cement Case
Less Top Pivot
Cover Pan
(x depth)
Special Layout #
x 626
Finish
RH Right
LH Left
Blank Double Acting
605 Bright Brass
606 Satin Brass
611 Bright Bronze
612 Satin Bronze
613 Dark Bronze
613E Dark Oxidized Satin Bronze - equivalent
618 Bright Nickel
619 Satin Nickel
622 Flat Black
625 Bright Chrome
626 Satin Chrome
5040 only available in
605, 629 and 630
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
17
SHALLOW DEPTH Floor Closers
PARTS DRAWINGS
MODEL 51
Right Hand Shown
3/4" Offset
(M)
(A)Pivot Stud
181770-ASY
(A)
(B) Hex Cap
181778-*
(B)
(C)Arm Cap & Screw
012142R*AS (RH, BRS)
012142L*AS (LH, BRS)
012144R*AS (RH, SS)
012144L*AS (LH, SS)
(C)
(D) 3/4" Offset Arm x Locking Screw
275177 (RH)
275176 (LH)
(E)
3/4" Offset Top Pivot Assembly
180 (standard)
F180 (fire rated up to 3 hours)
(M)
180-20 (20 minutes)
(N)
(N)
(D)
(F)
(E) Arm Locking Screw Only
PKG (5) 88905
(G)Arm Bearing Washer
275062-PKG (5)
(G)
(H)Spindle Washer
519000-*
(L)
(L) Spindle Adapter Package
includes shim socket screw
and washer 4007-XXA
(I) Floor Plate with Screws
4000500R*XXE (RH)
4000500L*XXE (LH)
Extended Spindles
Spindle Adapters:
4007-XXC 1/2" extended
(J) Closer Body
(Specify Complete
Model No. x LAP)
4007-XXE
(K) Cement Case with Screws
4000301
1" extended
4007-XXG 1-1/2" extended
(H)
Bottom Arm Package
(Includes C, D and
attaching screws)
252050R* (RH)
252050L* (LH)
4007-XXI
2" extended
(I)
(J)
(K)
For 51 x 1-1/2" Offset
180x1-1/2" (standard)
F180x1-1/2"
(fire rated up to 3 hours)
180-20x1-1/2"
(20 minutes)
1-1/2" Offset Arm x
Locking Screw
275167-*
1-1/2" Offset Bottom
Arm pkg
252060-*
*specify finish
18
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
Screw Kits
180 Screw Kit
107014 Machine (2) Req
107114 Wood (2) Req
Arm Screw Kit
107044 Machine
107144 Wood
Floor Plate Screw Kit
107004-*
Cement Case Screw Kit
107075
SHALLOW DEPTH Floor Closers
PARTS DRAWINGS
Model F5300 & F5310
(A)Door Rail
327006
(B) Bottom arm package
3252010-*
(D) Floor Plate with screws 4000600-*XXA
4000600-*XXE ("BC")
(E) Closer Body (specify complete model no. LAP)
(C) Spindle Washer
519000-*
(A)
(B)
(F) Cement case with screws 4000301
(C)
(D)
(E)
Screw Kits
Floor Plate Screw Kit
107004-*
Cement Case Screw Kit 107075
(F)
Slide Track Screw Kit
107033
Spindle Adapter Package
includes socket screw
Extended Spindle Adapters
4009-*XXC
1/2" extended
4009-*XXE
1" extended
4009-*XXG
1-1/2" extended
4009-*XXI
2" extended
*specify finish
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
19
SHALLOW DEPTH Floor Closers
PARTS DRAWINGS
Model Q51/QT51
Right Hand Shown
3/4" Offset
(A)
(A)Pivot Stud
181770-ASY
(S)
(B)
(B) Hex Cap
181778-*
(C)
(C)Arm Cap & Screw
73035R*AS (RH, BRS)
73035L*AS (LH, BRS)
(D)
(D)Q/QT51 Arm Mounting
Screws & Plate 73014-*
(H)
(E)
(F)
(E)Removable Arm 73001R-ASY (RH)
73001L-ASY (LH)
(P)
(F) Arm Locking Screw Only
88905-PKG (5)
(G)
(I)
(G)Arm Washer & Shim Package
275179
includes shim 275065 &
275178 torque washers
(I) Spindle Washer
519000-*
(S) 3/4" Offset Top
Pivot
180
FL180
Fire Rated
180 - 20
20 Minute
(H)Bottom Arm Package
222050R* (RH)
222050L* (LH)
(Includes C, D, E, F)
(P)Spindle Adapter Package
4007-XXC
(Includes shims, socket screw & washer)
(J)
(K)
Extended Spindles
Spindle Adapters:
(N)
4007-XXE
(L)
1/2" extended
4007-XXG 1" extended
(M)
(R)
M19 Intermediate
Pivot
Screw Kits
(R) 3/4" Offset Intermediate Pivot (1)
M19
FM19
Fire Rated
*specify finish
20
M19-20
20 Minute
180 Screw Kit
107014 Machine (2) Req
107114 Wood (2) Req
Q Floor Plate Screw Kit
107010-*
Cement Case Screw Kit
107075
M19 Intermediate Pivot Screw Kit
107015 Machine (2) Req
107115 Wood (2) Req
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
(J)Floor Plate w/Screws
4000501R* XXE (RH)
4000501L* XXE
(LH), "BC”)
(K) Q51 Styrofoam Filler 4000023
(N)QT51 Styrofoam Filler
4000019
(L) Closer Body
(Specify complete model no. x LAP)
(M) Cement Case w/
Screws 4000301
SHALLOW DEPTH Floor Closers
PARTS DRAWINGS
MODEL HM51
Right Hand Shown
3/4" Offset Only
(A)Arm Cap & Screw
73025R*AS (RH)
73025L*AS (LH)
(J)
(B) HM51 Arm Mounting Screws & Plate
73014-*
(K) Spindle Adapter Package
4007-XXA
(A)
(C)Arm & Screw
73041R*AS (RH)
73041L*AS (LH)
(B)
(J)
(D)Arm Locking Screw Only
88905 - (5)
(C)
(E)
(F) Spindle Washer
519000-*
(F)
Extended Spindles
Spindle Adapters:
(Includes shims, arm washer
& socket screw)
4007-XXC1/2" extended
(D)
(E) Arm Bearing Washer
275062-PKG (5)
Bottom Arm Package
222050R*HM (RH)
222050L*HM (LH)
(Includes A, B, C)
(K)
4007-XXE 1" extended
4007-XXG 1-1/2" extended
4007-XXI 2" extended
(G)
(H)
hinge for HM
(L)
(I)
(G)Floor Plate w/Screws
4000501R* XXE (RH, “BC”)
4000501L* XXE (LH,“BC”)
(H)Closer Body
(Specify complete model no. x LAP)
(I) Cement Case with Screws
4000301
(L) Special Offset Hinges (3)
254545R*PK
254545L*PK
*specify finish
Screw Kits
Floor Plate Screw Kit
107004-*
Cement Case Screw Kit
107075
Hinge screw kit
107519-*
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
21
SHALLOW DEPTH Floor Closers
PARTS DRAWINGS
Model 50 and 5020
(A)Jamb Portion
3065
(A)
(B) Finish Plate
012202-*PK(BRS)
012204-*PK(SS)
(B)
(C)Door Portion
30243
(D)W28 Wood Door Plate/Shim Pkg
107066
(Includes E and F)
Wood door arm pkg. 282126
(Includes D and G)
(E) Arm Plate Shims (.062)
46045-PKG (5)
Arm Plate Shims (.187)
46145-PKG (5)
(D)
340 Top Pivot
(C)
(L)
(E)
(L) 554 Concealed Arm Package
282554
Note: C
annot be used on model 5020
(F)
(G)
(P)
(I)
(H)
(M)Floor Plate with Screws
4000600-*XXE
4000600-*XXE BC”)
4000600-*XXI(“DA”)
(J)
(F) Arm Plate & Stud Assy
46445
(G)Arm & Arm Set Screw
282026
(H)Arm Set Screw Only
26087-PKG (5)
(I) Arm Alignment
Screw & Washer
107032-*
(K)
(N) Closer Body
(Specify Complete Model No. x LAP)
(M)
(O) Cement Case with Screws
4000301
(P) Bottom Arm Package 282026-*
(Includes H, G and I)
(K) Spindle Washer
519000-*
(N)
(O)
Screw Kits
(J) Spindle Adapter Package 4010-XXA
(Includes socket screw & shim)
Extended Spindles
Spindle Adapters
4010-XXC 1/2" extended
4010-XXE
1" extended
4010-XXG 1-1/2" extended
*specify finish
22
4010-XXI
2" extended
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
554 Arm Screw Kit
107064
Floor Plate Screw Kit
107004-*
Cement Case Screw Kit
107075
340 Screw Kit
107329 Machine
& Wood
Arm Screw Kit
107048 Machine
107144 Wood
SHALLOW DEPTH Floor Closers
PARTS DRAWINGS
MODEL 5040
Right Hand Shown
3/4" Offset
(A)Jamb Portion
42801
(D)Top Patch
7494* PK
(Includes C and L)
(A)
(B)
(B) Finish Plate
012202-*PK (BRS)
012204-*PK (SS)
(C)
(D)
(M)Floor Plate with Screws
4000600-*XXE BC”)
(N)Closer Body
(Specify Complete
Model No. x LAP)
(O)Cement Case with Screws
4000301
(C) Patch Filling
7495-*
(J) Bottom Pivot Insert
74101
(E) Bottom Patch
7495*PK
(Includes C and J)
(L) Top Pivot Insert
74102
(E)
(K)
(K)Spindle Washer 519000-*
(M)
(N)
(O)
Screw Kits
Floor Plate Screw Kit
107004-*
Cement Case Screw Kit
107075
340 Screw Kit
Machine & Wood
107329
*specify finish
Copyright © 2013, Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
23
SHALLOW DEPTH Floor Closers
contact us at:
Rixson®
3000 Highway 74 East
Monroe, NC 28112
Tel: 800-457-5670
Fax: 800-338-0965
ASSA ABLOY Door Security Solutions Canada
160 Four Valley Drive
Vaughan, Ontario, L4K 4T9 Canada
Tel: 800-461-3007
Fax: 800-221-0489
For a complete listing of products and
applications please visit our web site.
www.rixson.com
www.assaabloy.ca
Rixson®, Rixson and Design® are registered trademarks of Yale Security Inc., an ASSA ABLOY Group company. Other products' brand names may be trademarks or registered trademarks of their
respective owners and are mentioned for reference purposes only. These materials are protected under U.S. copyright laws. All contents current at time of publication. Copyright © 2001, 2013, Yale
Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
44037-9/13R
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising