Serato DJ Quickstart Guide for Pioneer DDJ‑WeGO3

Serato DJ Quickstart Guide for Pioneer DDJ‑WeGO3
QUICK-START
GUIDE
PIONEER
DDJ-WeGO 3
Installation and Setup
The Pioneer DDJ-WeGO 3 is a class compliant USB plug and play device
for Mac, however requires drivers for Windows. You will find these on the
installation cd provided with your Pioneer DDJ-WeGO 3.
NOTE: Please ensure you have the latest available drivers AND firmware
updates, which may be required in order to be compatible with Serato DJ.
Please go to http://serato.com/dj/support
1. Download and Install the latest version of Serato DJ from
http://serato.com/dj/downloads
2. Connect your Pioneer DDJ-WeGO 3 to an available USB Port.
Open Serato DJ.
Serato DJ Activation
To find out how to activate Serato DJ by either starting your free 14 day
trial, or purchasing a license for Serato DJ, click here for the most up to
date information.
Controller
1 2
19 20
3 4 5 6 7
21
22
23
8
9
10 11 12 13 14 15
24
25
26
16
17 18
NOTE: SHIFT button is used with other buttons that have shift modifier functions
#
DDJ-WeGO 3
Serato DJ Function
Shift Function
1
SYNC
Turn SYNC on
Sync Off (Press twice to return to Absolute Pitch)
2
TEMPO FADER
Adjust Tempo
When in Sync mode, used to disable the Pitch Fader
temporarily and change the zero position
3
1/2X
Halves the current loop size
Set Manual Loop In point (Adjust In point if loop is active)
4
MIC VOL
Adds and triggers Cue Points/Triggers Sampler Slots
Delete Cue Points/Stop Sampler Slots
5
LOOP
Turn Auto Loop On
Loop Off/Reloop
6
2X
Doubles the current loop size
Set Manual Loop Out point (Adjust Out point if loop is active)
7
FX 1
Enables Jog FX 1
Select Effect in Slot 1
8
FX 2
Enables Jog FX 2 / Adjust FX modifier
Select Effect in Slot 2 (Multi-FX only)
9
FX 3
Enables Jog FX 3 / Adjust FX modifier
Select Effect in Slot 3 (Multi-FX only)
10
LOAD A
Load selected track to deck B
11
CHANNEL EQ
Adjust HI, MID and LOW
12
HEADPHONE VOL
Adjust headphone output
13
BROWSE
Browse songs in library or crate view. Press to toggle BACK
14
CUE SELECT
Cue master output in headphones
15
CUE A/B
Cue selected channel in headphones
16
LOAD B
Load selected track to deck B
NOTE: SHIFT button is used with other buttons that have shift modifier functions
#
DDJ-WeGO 3
Control
Serato DJ Function
17
MASTER VOL
Adjust Master output volume
18
STANDBY/ON
WeGo 3 Power On/Standby
19
JOG WHEEL
Touch the top to scratch. Moving the outside of the wheel
will bend pitch of your track.
20
SHIFT
Used with other controls that have SHIFT modifier functions
21
CUE
Play from Temp Cue/Set temp Cue
22
PLAY/PAUSE
Play or pause the playing track
23
CUE POINTS
Add or trigger Hot Cues/Triggers samples in Sampler mode.
24
HOT CUE/SAMPLER
Toggle between Hot Cues and Sampler
25
CROSSFADER
Crossfade audio from Channel A to Channel B
26
CHANNEL FADER
Adjust Channel Volume
Shift Function
Beat skip
Load previous track in library
Delete cue point/Stops playing samples.
1
2
7
#
3
4
5
6
8
DDJ-WeGO 3
Function
1
DC POWER IN
DC power input
2
USB
Connect WeGo 3 to your computer via USB
3
iOS DOCK
Connect WeGo 3 to your iOS device (no function with Serato DJ)
4
KENSINGTON LOCK
Lock the controller using a Kensington Lock
5
RCA MASTER OUT
RCA connections for master output
6
MIC
Microphone input
7
1/4” HEADPHONES
Connect 1/4” headphones to this output
8
1/8” HEADPHONES
Connect 1/8” headphones to this output
Looping
DJ-FX
You have the choice of Auto or Manual Looping within Serato DJ with the
Pioneer DDJ-WeGo 3.
The DJ-FX in Serato DJ are powered by iZotope™.
Click the FX tab
open the FX panel. Select either 1, 2 or M to
assign the selected effect bank to a deck or Master Output.
Looping is controlled by the AUTO LOOP/MANUAL buttons for each deck.
Manual Looping is controlled by holding SHIFT and pressing a loop button
control.
DDJ-WeGO 3 Control
Auto Loop
Manual Loop
LOOP
Auto Loop On/Off
Loop Off/Reloop
1/2X
Half Loop Length
Set/Adjust Loop
In point
2X
Double Loop Length
Set/Adjust Loop
Out point
NOTE You can also save a loop to the next available free loop slot in the
software. To do this, click
on an available loop slot. Your loops are
saved to the file and recalled the next time it is loaded. They are not lost if
the file is moved or renamed.
There are two available FX modes. Single FX Mode allows you to select one
effect per FX bank, and has multiple parameters that can be adjusted. Multi
FX Mode allows you to select up to three effects per FX bank, and adjust
only one parameter, the FX Depth. The same effects available in Single FX
mode are available in Multi FX mode, as well some additional presets.
You can select between the two FX modes by clicking either the Single FX
mode button
or Multi FX mode button
DDJ-WeGO 3
Control
Single FX Mode
Shift
FX 1
Effect On/Off and links platter to FX
Parameter 1
Select Effect
FX 2
Toggles FX Parameter 2
N/A
FX 3
Toggles FX Parameter 3
N/A
DDJ-WeGO 3
Control
Multi Fx Mode
Shift
FX 1
Slot 1 Effect On/Off and links platter to Select Effect
FX Parameter
in Slot 1
FX 2
Slot 2 Effect On/Off and links platter to Select Effect
FX Parameter
in Slot 2
FX 3
Slot 3 Effect On/Off and links platter to Select Effect
FX Parameter
in Slot 3
MIDI
Using the Tool Tips
The MIDI feature in Serato DJ provides the ability to remap Serato DJ
software functions to your primary Serato DJ controller, interface or mixer.
You can also assign controls to a secondary MIDI controller to further
enhance your performance.
For more information on MIDI mapping with Serato DJ click here.
Click on the
icon to enable Tool Tips. This is located in between the
MIDI and setup button in the top right hand corner of the screen. Tool Tips
provide a handy way to learn the various features of Serato DJ.
To remap your supported Serato DJ device, open the SETUP screen and
click the MIDI tab. If your Serato DJ device supports hardware remapping it
will show up in the MIDI Devices list at the top.
Select your connected device from the MIDI Devices list and make sure the
“Allow Serato Hardware Remapping” option is checked.
Once checked, the MIDI assign button at the top of the screen will become
available for you to start remapping.
You can save, edit or delete MIDI presets in the MIDI tab of the SETUP
screen. Clicking ‘Restore Defaults’ will erase any custom mappings for all
connected devices and revert their functions back to default.
Download the Serato DJ software manual for further information.
NOTE: Official Serato Accessories do not currently support user remapping.
Hardware features that cannot be remapped at this stage are Jogwheels/
Platters, Input Switches, Shift buttons and Performance Pad Mode buttons.
Re-mapping any pad(s) in Hot Cue mode will also re-map the same pad in
Saved Flip mode and vice versa.
Move the mouse over a section of the screen to bring up a context sensitive
tool tip. Holding the mouse over the
button with Tool Tips turned on
will show you a list of all keyboard shortcuts.
For more information about how to use Serato DJ, please go to our website
www.serato.com or refer to the Serato DJ Software Manual. For more
information on your controller, please refer to the hardware manual.
For further help, please contact support@serato.com or go to
www.serato.com/dj/support
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising