HEPA HRV

HEPA HRV
HEAT RECOVERY VENTILATOR
BROAN™ HRVH100SE with HEPA FILTRATION
Part no. HRVH100SE
Control
50 to 104 CFM (0.4 in. w.g.)
• The electronic main wall control, included with
ers 5 operation modes:
AUTO, ECO, CONT, RECIRC and TURBO.
VC0131
Defrost System
•
The BROAN™ HRVH100SE Heat Recovery
Ventilatorwith HEPA Filtration
that removes 99.97% of allergens and other microscopic particles in
design, allowing for an ultra-quiet operation which is barely audible at
low speed (2.5 sones). Furthermore, since the BROAN™ HRVH100SE
ducting diameter is reduced to 5 inches, its installation is now easier
and faster than before.
- Standard (factory set regular mode)
- Plus (for people who live in cold region)
- Discretion (keeps the same speed when performing defrost as
- performing ventilation)
OUTSIDE TEMPERATURE
°C
°F
WARMER THAN -5 WARMER THAN 23
FROM -5 TO -15
FROM 23 TO 5
FROM -15 TO -27
FROM 5 TO -17
-27 AND LESS
-17 AND LESS
DEFROST CYCLES
DEFROST IN MINUTES / AIR EXCHANGE IN MINUTES
STANDARD
PLUS
DISCRETION
NO DEFROST
NO DEFROST
NO DEFROST
6/40
10/30
10/40
5/21
10/20
10/21
8/15
10/15
15/15
Heat Recovery Core
• 5-in. diameter ports mean smaller duct to ease installation
• Integrated defrost control; allows fast and easy adjustment of the
defrost duration according to climatic zones
• Electronic wall control with LCD screen included
• Removable terminal block to ease wall control connections
• Ultra-quiet operation
*
•
Dimensions: 10 in. x 10 in. x 10 in. (25.4 cm x 25.4 cm x 25.4 cm)
Exchange surface: 70 sq. ft. (6.5 m²)
Weight: 5 lb. (2.3 kg)
Material: Polypropylene
REPAIRS AND MAINTENANCE
• Complies with the UL 1812 requirements regulating the installation
of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with CSA C444 requirements regulating the installation of
Heat Recovery Ventilators
• Technical data was obtained from published results of tests relating
to CSA C439 Standards
ed
*
•
All parts of the BROAN™ HRVH100SE that could need maintenance can
ccess for easy
repairs. The PSC motor is permanently lubricated.
WARRANTY
The BROAN™ HRVH100SE is fully protected by a 2-year warranty on all
parts and labor. The heat recovery core is covered by a 10-year
warranty, with the original proof of purchase.
Warranty: 10 years
Requirements and standards
Available at:
99528484A
DIMENSIONS: BROAN® HRVH100SE with HEPA FILTRATION
37.910 "
11.892 "
17.423 "
39.442 "
NOTE: All unit ports were created to be connected to ducts having a minimum of 5” diameter, but if need be, they can be connected to bigger
sized ducts by using an appropriate transition (e.g.: 5” diameter to 6” diameter transition).
VENTILATION PERFORMANCE
EXTERNAL
STATIC PRESSURE
PA
IN. W.G.
25
0.1
50
0.2
75
0.3
100
0.4
125
0.5
150
0.6
175
0.7
200
0.8
225
0.9
NET SUPPLY
AIR FLOW
L/S
CFM
M3/H
L /S
54
53
51
49
46
43
41
37
35
114
112
109
104
98
92
86
79
74
194
190
185
177
166
156
146
134
164
54
53
51
49
46
43
41
37
35
ENERGY PERFORMANCE
GROSS AIR FLOW
SUPPLY
EXHAUST
CFM
M3/H
L /S
CFM
114 194 59
126
112 190 57
121
109 185 55
117
104 177 53
112
98
166 50
107
92
156 49
103
86
146 46
98
79
134 43
92
74
164 41
86
SUPPLY
TEMPERATURE
°C
°F
HEATING
0
32
0
32
-25
-13
-25
-13
M3/H
214
269
199
190
182
175
166
156
146
NET
POWER
SENSIBLE
APPARENT LATENT RECOVERY/
AIR FLOW CONSUMED RECOVERY
MOISTURE
SENSIBLE
WATTS EFFICIENCY EFFECTIVENESS
TRANSFER
L/S CFM
24
30
24
30
51
64
51
64
42
51
46
51
65
61
60
55
75
71
78
71
-0.01
-0.01
0.02
0.03
SPECIFICATIONS
• Model: HRVH100SE
• Housing: Pre-painted steel
• Part number: HRVH100SE
• Door covering: Pre-painted Steel
• Total assembled weight (including
• Insulation: Expanded polystyrene
polypropylene core): 56 lb. (25.4 kg)
• Round 5” ports
• Electronic control with LCD screen included:
- 5 operation modes including new
ECO and TURBO modes
• Choice of 3 defrost modes
• Installation: Suspension by chains
ttings with
and springs
• Heat recovery core:
- Exchange surface: 70 sq. ft. (6.5 m²)
ow/Polypropylene
lters: 2 washable
• Supply and Exhaust Blower Motor: 1 motor
9 3/8” x 10” x 3/8”
- Protection type: Thermally protected
(23.8 cm x 25.4 cm x 0.95 cm)
- Insulation class: B
Project:
Location:
Part number: HRVH100SE
Quantity:
Submitted by:
• Unit Electrical Characteristics:
Volts
Frequency
Ampere
Watts
120
60 Hz
0.6
68
REMARKS
Date:
Broan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)
www.broan.com
99528484A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising