RP-IMC811FP 10/100/1000Base-TX to 100/1000Base-X SFP Industrial PoE+ Media Converter

RP-IMC811FP 10/100/1000Base-TX to 100/1000Base-X SFP Industrial PoE+ Media Converter
RP-IMC811FP
10/100/1000Base-TX to 100/1000Base-X SFP
Industrial PoE+ Media Converter
RP-IMC811FP is an Industrial PoE Converter
providing superior performance in stability,
environmental adaptability. It equips with one
10/100/1000BASE-T RJ45 copper and one slot for 100/1000BASE-X SFP.
The RP-IMC811FP complies with IEEE 802.3af/at standards for supplying PoE power
budget up to 30 W and with its Cold-Design will not only power up your PD device, also reduce
the excessive heat problem to a minimum. The operating temperature range from -40 to 75
Degree C allows RP-IMC811FP to be placed in almost any difficult environment.
With IP30 industrial case protection, the RP-IMC811FP provides a high level of immunity
against corrosion and electromagnetic interference.RP-IMC811FP also allows either DIN rail or
wall mounting for efficient use of cabinet space.
Feature

Supports 48V-56VDC, Redundant power input
Adjustable SFP speed 100M or 1000M
PoE Output power up to 30Watts
Reverse polarity protection
Overload current protection
ESD protection diodes on RJ-45 port
2K MAC Table
9KB Jumbo Frame
Rugged Metal IP30 Protection enclosure

Operating Temperature: -40°C to +75°C








Specification
Standards






Data Processing
Flow Control
Switch Architecture
MAC Table Size
Jumbo Frame
Packet Buffer Size







Interface

Network Cable
Protocol
POE Pin Assignment






LED indicators


DIP Switch
Reverse polarity protection
Overload current protection
Power Supply






Alarm Relay Contact


Power Consumption
PoE power




Removable
Terminal Block




Operating Temperature
Operating Humidity
Storage Temperature
Housing
Dimension
Installation mounting
Safety
EMC/EMS
EMI
Vibration
Shock
Free Fall












IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3ab 1000Base-T Gigabit Ethernet
IEEE 802.3z 1000Base-X Gigabit Ethernet
IEEE802.3x Flow Control and Back Pressure
IEEE802.3af/at PoE
Store and Forward
IEEE 802.3x Flow Control and Back Pressure
Back-plane (Switching Fabric): 4Gbps
2K
9KB
1M
1x RJ-45 10/100/1000BaseT(X) PSE with PoE Output power up
to 30Watts
1x 100/1000M SFP slot
UTP/STP above Cat.5e Cable
EIA/TIA-568 10-ohm (100m)
CSMA/CD
30 watts 2 pairs Mode A End Span
V+, V+, V-, V- for pin 1, 2, 3, 6
PW1: ON- power good, OFF-power failed (Green)
UTP LED: PD detected (Amber) ; Link/active (Green)
SFP LED: SFP detected (Green)
Set SFP speed 100M or 1000M
Present
Present
4 pin terminal block with 48V-56V VDC Power Input
SW ( Relay ): Relay switch for alarm
Relay outputs with current carrying capacity of 1 A @24VDC,
Relay in short circuit mode when power fails.
Relay in open circuit mode when power supply is connected
2W @48 VDC Without PoE
Maximum POE power 36watts at 56VDC input
Provide 4 pin terminal block
Wire range: 0.34mm^2 to 2.5mm^2
Solid wire (AWG):12-24/14-22
Stranded wire(AWG): 12-24/14-22
Torque:5lb-In/0.5Nm/0.56Nm
Wire Strip length: 7-8mm
-40℃~75℃
5% to 95% (Non-condensing)
-40℃~85℃
Rugged Metal ,IP30 Protection
103.5 x 32 x 81.5mm (LxWxD)
DIN Rail mounting and Wall Mounting
IEC EN60950-1
CE, FCC
FCC Part 15 Subpart B Class A, CE EN 55022 Class A
EN 50155 / EN 60068-2-6
EN 50155 / EN 60068-2-27
EN 50155 / EN 60068-2-32
Ordering information
RP-IMC811FP
10/100/1000Base-TX to 100/1000Base-X SFP
Industrial PoE+ Media Converter
REPOTEC CO., LTD.
3F., No.258, Liancheng Rd., Zhonghe District., New Taipei City 235, Taiwan
TEL: 886-2-8227-1888 FAX: 886-2-8227-1818
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising