FCC kkadexreport
~日《Ξ冫)蛋 迎磊冤:E
shenzhen BOntekComp"a"Ce Testing Laboratorv Co.`Ltd.
FCC PART15SUBPART B
MEAsUREMENT AND TEST REPORT
FOr
FINGERTEC WORLDWIDE sDN BHD
N06,8&10,JALAN BK3/2,BANDAR KlNRARA,47180PUCHONG,sELANG0R,MALAYsIA
Mode"K-KADEX
July19,2012
Equipment Type:
This Rep° rt Concerns:
冈
RFlD Card Reader
0ngInal Report
Test By:
Vincent
Report Number:
BCT12FR¨ 0905E
Test Date:
June28~Julv19,2012
R四 枷 ed即
№咖 助
Prepared By:
shenzhen Bontek CompⅡ ance Testing Laboratory Co,Ltd.
V kC沩
η
山 ’
1/F,Block East H-3,OCT Eastern lnd zone,Qiaocheng East
Road,Nanshan,shenzhen,China
+86-755-86337020
FaX∶ +86-755¨ 86337028
Tel∶
Note:This test reportis limited to the above c"ent company and the product model only,It may not be
dup"Catedwithout prior written consent of shenzhen BOntek Comp"anCe Testing Laboratory Co`Ltd
1`只 B|° ck
East H-3,0CT Eastern lnd zone,Qiaocheng East ROad`Nanshan,shenzhen,PR Chna
Te| 86ˉ 755ˉ 86337020(53Lines) Fax 86ˉ 755-86337028
h饪 p
/vvmv bontek com cn
TABLE OF CONTENTS
1 - GENERAL INFORMATION ....................................................................................................................... 3
1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................................ 3
1.2 TEST STANDARDS ....................................................................................................................................................... 4
1.3 TEST SUMMARY .......................................................................................................................................................... 4
1.4 TEST METHODOLOGY .................................................................................................................................................. 4
1.5 TEST FACILITY ............................................................................................................................................................ 4
1.6 TEST EQUIPMENT LIST AND DETAILS ............................................................................................................................. 5
2 - SYSTEM TEST CONFIGURATION........................................................................................................... 7
2.1 JUSTIFICATION ............................................................................................................................................................ 7
2.2 EUT EXERCISE SOFTWARE ......................................................................................................................................... 7
2.3 SPECIAL ACCESSORIES ............................................................................................................................................... 7
2.4 EQUIPMENT MODIFICATIONS ........................................................................................................................................ 7
2.5 CONFIGURATION OF TEST SYSTEM ............................................................................................................................... 7
2.6 TEST SETUP DIAGRAM ................................................................................................................................................ 7
3 - DISTURBANCE VOLTAGE AT THE MAINS TERMINALS...................................................................... 8
3.1 MEASUREMENT UNCERTAINTY...................................................................................................................................... 8
3.2 LIMIT OF DISTURBANCE VOLTAGE AT THE MAINS TERMINALS........................................................................................... 8
3.3 EUT SETUP ............................................................................................................................................................... 8
3.4 INSTRUMENT SETUP .................................................................................................................................................... 8
3.5 TEST PROCEDURE ...................................................................................................................................................... 9
3.6 SUMMARY OF TEST RESULTS ....................................................................................................................................... 9
3.7 DISTURBANCE VOLTAGE TEST DATA ............................................................................................................................. 9
3.8 TEST RESULT ............................................................................................................................................................. 9
4 - RADIATED DISTURBANCES ................................................................................................................. 12
4.1 MEASUREMENT UNCERTAINTY.................................................................................................................................... 12
4.2 LIMIT OF RADIATED DISTURBANCES ............................................................................................................................ 12
4.3 EUT SETUP ............................................................................................................................................................. 12
4.4 TEST RFID CARD READER SETUP .............................................................................................................................. 13
4.5 TEST PROCEDURE .................................................................................................................................................... 13
4.6 CORRECTED AMPLITUDE & MARGIN CALCULATION ....................................................................................................... 13
4.7 RADIATED EMISSIONS TEST RESULT ........................................................................................................................... 13
4.8 TEST RESULT ........................................................................................................................................................... 13
APPENDIX A - EUT PHOTOGRAPHS......................................................................................................... 16
EUT – FITTING VIEW ...................................................................................................................................................... 16
EUT – FRONT VIEW........................................................................................................................................................ 16
EUT – REAR VIEW ......................................................................................................................................................... 16
EUT – OPEN VIEW ......................................................................................................................................................... 17
EUT - PCB VIEW ........................................................................................................................................................... 17
EUT - PCB VIEW ........................................................................................................................................................... 18
EUT - PCB VIEW ........................................................................................................................................................... 19
APPENDIX B - TEST SETUP PHOTOGRAPHS.......................................................................................... 20
CONDUCTED EMISSION ................................................................................................................................................... 20
RADIATED EMISSION ....................................................................................................................................................... 20
APPENDIX C - BONTEK ACCREDITATION CERTIFICATES.................................................................... 21
Report No.:BCT12FR-0905E
Page 2 of 23
FCC PART 15 SUBPART B Report
1 - GENERAL INFORMATION
1.1 Product Description for Equipment Under Test (EUT)
Client Information
Applicant:
FINGERTEC WORLDWIDE SDN BHD
Address of applicant:
NO.6, 8 & 10, JALAN BK 3/2, BANDAR KINRARA, 47180 PUCHONG,
SELANGOR, MALAYSIA
Manufacturer:
FINGERTEC WORLDWIDE SDN BHD
Address of manufacturer:
NO.6, 8 & 10, JALAN BK 3/2, BANDAR KINRARA, 47180 PUCHONG,
SELANGOR, MALAYSIA
General Description of E.U.T
EUT Description:
RFID Card reader
Trademark:
Model No.:
K-Kadex
Power Rating:
DC 12V
Adaptor Information:
Switch mode power supply
Model: KSAFH1200300T1M3
Input: AC100-240V 50/60Hz 1.2A
Output: DC12V 3.0A
Remark: * The test data gathered are from the production sample provided by the manufacturer.
Report No.:BCT12FR-0905E
Page 3 of 23
FCC PART 15 SUBPART B Report
1.2 Test Standards
The following Declaration of Conformity report of EUT is prepared in accordance with
FCC Rules and Regulations Part 15 Subpart B 2006
The objective of the manufacturer is to demonstrate compliance with the described above standards.
1.3 Test Summary
For the EUT described above. The standards used were FCC Part 15 Subpart B for Emissions
Table 1 : Tests Carried Out Under FCC Part 15 Subpart B
Standard
Test Items
Status
FCC Part 15 Subpart B
Conduction Emission, 0.15MHz to 30MHz
√
FCC Part 15 Subpart B
Radiation Emission, 30MHz to 1000MHz
√
√
×
Indicates that the test is applicable
Indicates that the test is not applicable
1.4 Test Methodology
All measurements contained in this report were conducted with ANSI C63.4-2009, American National
Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and
Electronic Equipment in the range of 9 kHz to 40 GHz.
The equipment under test (EUT) was configured to measure its highest possible radiation level. The
test modes were adapted accordingly in reference to the Operating Instructions.
The maximum emission levels emanating from the device are compared to the FCC Part 15 Subpart B
limits for radiation emissions and the measurement results contained in this test report show that EUT
is to be technically compliant with FCC requirements.
All measurement required was performed at Shenzhen Bontek Compliance Testing Laboratory Co.,
Ltd. at 1/F, Block East H-3, OCT Eastern Ind. Zone, Qiaocheng East Road, Nanshan, Shenzhen,
China
1.5 Test Facility
The test facility is recognized, certified, or accredited by the following organizations:
FCC – Registration No.: 338263
Shenzhen Bontek Compliance Testing Laboratory Co., Ltd. , EMC Laboratory has been registered and
fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance
letter from the FCC is maintained in our files. Registration 338263, March 03, 2011
Report No.:BCT12FR-0905E
Page 4 of 23
FCC PART 15 SUBPART B Report
IC Registration No.: 7631A
The 3m alternate test site of Shenzhen Bontek Compliance Testing Laboratory Co., Ltd. EMC
Laboratory has been registered by Certification and Engineer Bureau of Industry Canada for the
performance of with Registration NO.: 7631A on January 25, 2011
CNAS - Registration No.: L3923
Shenzhen Bontek Electronic Technology Co.,Ltd. to ISO/IEC 17025:25 General Requirements for the
Competence of Testing and Calibration Laboratories(CNAS-CL01 Accreditation Criteria for the
Competence of Testing and Calibration Laboratories) for the competence in the field of testing.
The acceptance letter from the CNAS is maintained in our files: Registration: L3923, March 22,2012.
TUV - Registration No.: UA 50203122-0001
Shenzhen Bontek Compliance Testing Laboratory Co., Ltd. An assessment of the laboratory was
conducted according to the"Procedures and Conditions for EMC Test Laboratories"with reference to
EN ISO/IEC 17025 by a TUV Rheinland auditor. Audit Report NO. 17010783-002
1.6 Test Equipment List and Details
Test equipments list of Shenzhen Bontek Compliance Testing Laboratory Co., Ltd. .
No.
Equipment
Manufacturer
Model No.
S/N
Calculator
date
Calculator
due date
1
EMI Test Receiver
R&S
ESCI
100687
2011-4-7
2012-4-6
2
EMI Test Receiver
R&S
ESPI
100097
2011-7-25
2012-7-24
3
Amplifier
HP
8447D
2011-4-7
2012-4-6
4
Single Power
Conductor Module
FCC
FCC-LISN-550-1-01CISPR25
07101
2011-4-7
2012-4-6
5
Single Power
Conductor Module
FCC
FCC-LISN-550-1-01CISPR25
07102
2011-4-7
2012-4-6
6
Power Clamp
SCHWARZBECK
MDS-21
3812
2011-4-7
2012-4-6
7
Positioning
Controller
C&C
CC-C-1F
MF7802113
N/A
N/A
`Electrostatic
Discharge
Simulator
TESEQ
NSG437
125
2011-4-11
2012-4-10
9
Fast Transient
Burst Generator
SCHAFFNER
MODULA615
0
34572
2011-4-7
2012-4-6
10
Fast Transient
Noise Simulator
Noiseken
FNS-105AX
10501
2011-6-16
2012-6-15
11
Color TV Pattern
Genenator
PHILIPS
PM5418
TM209947
N/A
N/A
12
Power Frequency
Magnetic Field
Generator
EVERFINE
EMS610008K
608002
2011-4-7
2012-4.6
8
Report No.:BCT12FR-0905E
Page 5 of 23
1937A02492
FCC PART 15 SUBPART B Report
14
Capacitive
Coupling Clamp
TESEQ
CDN8014
25096
2011-4-7
15
High Field
Biconical Antenna
ELECTROMETRICS
EM-6913
166
2011-11-28
16
Log Periodic
Antenna
ELECTROMETRICS
EM-6950
811
2011-11-28
2012-11-27
17
Remote Active
Vertical Antenna
ELECTROMETRICS
EM-6892
304
2011-11-28
2012-11-27
18
TRILOG
Broadband TestAntenna
SCHWARZBECK
VULB9163
9163-324
2009-04-11
2012-04-10
19
Horn Antenna
SCHWARZBECK
BBHA9120A
0499
2011-11-28
2012-11-27
20
Teo Line Single
Phase Module
SCHWARZBECK
NSLK8128
8128247
2011-10-24
2012-10-23
21
Triple-Loop
Antenna
EVERFINE
LLA-2
711002
2011-4-7
2012-4-6
22
Electric bridge
Jhai
JK2812C
803024
N/A
N/A
23
RF POWER
AMPLIFIER
FRANKONIA
FLL-75
1020A1109
2011-4-7
2012-4-6
24
CDN
FRANKONIA
CDN M2+M3
A3027019
2011-4-7
2012-4-6
25
6DB Attenuator
FRANKONIA
N/A
1001698
2011-4-7
2012-4-6
26
EM Injection clamp
FCC
F-203I-23mm
091536
2011-4-7
2012-4-6
27
9kHz-2.4GHz
signal generator
2024
MARCONI
10S/6625-99457-8730
112260/042
2011-4-7
2012-4-6
28
10dB attenuator
ELECTROMETRICS
EM-7600
836
2011-4-7
2012-4-6
29
ISN
TESEQ
ISN-T800
30301
2011-6-23
2012-6-22
30
10KV surge
generator
SANKI
SKS-0510M
048110003E
321
2011-11-14
2012-11-13
31
HRMONICS&FLIC
KRE ANALYSER
VOLTECH
PM6000
200006700433
2011-6-27
2012-6-26
32
Spectrum Analyzer
R&S
FSP
100397
2011-11-2
2012-11-1
33
Broadband
preamplifier
SCH
WARZBECK
BBV9718
9718-182
2011-4-07
2012-4-06
34
Temperature &
Humidity Chamber
TOPSTAT
TOS-831A
3438A05208
2011-4-07
2012-4-06
Report No.:BCT12FR-0905E
Page 6 of 23
2012-4-6
2012-11-27
FCC PART 15 SUBPART B Report
2 - SYSTEM TEST CONFIGURATION
2.1 Justification
The system was configured for testing in a typical fashion (as only used by a typical user).
2.2 EUT Exercise Software
The EUT exercising program used during radiated and conducted testing was designed to exercise
the various system components in a manner similar to a typical use. The software offered by
manufacture, can let the EUT being normal operation.
2.3 Special Accessories
As shown in section 2.5, interface cable used for compliance testing is shielded as Normally supplied
by FINGERTEC WORLDWIDE SDN BHD and its respective support equipment manufacturers.
2.4 Equipment Modifications
The EUT tested was not modified by BCT.
2.5 Configuration of Test System
2.6 Test Setup Diagram
EUT
1.0m
1.5m
Report No.:BCT12FR-0905E
Page 7 of 23
FCC PART 15 SUBPART B Report
3 - DISTURBANCE VOLTAGE AT THE MAINS TERMINALS
3.1 Measurement Uncertainty
All measurements involve certain levels of uncertainties, especially in field of EMC. The factors
contributing to uncertainties are spectrum analyzer, cable loss, and LISN.
The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of any
conducted emissions measurement is 3.4 dB.
3.2 Limit of Disturbance Voltage at The Mains Terminals
Frequency Range (MHz)
Limits (dBuV)
Quasi-Peak
Average
0.150~0.500
66~56
56~46
0.500~5.000
56
46
5.000~30.00
60
50
Note: (1)The tighter limit shall apply at the edge between two frequency bands.
3.3 EUT Setup
The setup of EUT is according with ANSI C63.4-2009 measurement procedure. The specification used
was the FCC Rules and Regulations Part 15 Subpart B limits.
The EUT was placed center and the back edge of the test table.
The AV cables were draped along the test table and bundled to 30-40cm in the middle.
The spacing between the peripherals was 10 cm.
Maximum emission emitted from EUT was determined by manipulating the EUT, support equipment,
interconnecting cables and varying the mode of operation and the levels in the final result of the test
were recorded with the EUT running in the operating mode that maximum emission was emitted.
Test Receiver
AC 120V/60Hz
L.I.S.N
Load
EUT
3.4 Instrument Setup
The test receiver was set with the following configurations:
Test RFID Card reader Setting:
Frequency Range……………………….150 KHz to 30 MHz
Detector…………………………………..Peak & Quasi-Peak & Average
Sweep Speed……………………………Auto
IF Band Width……………………….…..9 KHz
Report No.:BCT12FR-0905E
Page 8 of 23
FCC PART 15 SUBPART B Report
3.5 Test Procedure
During the conducted emission test, the EUT power cord was connected to the auxiliary outlet of the
first Artificial Mains.
Maximizing procedure was performed on the six (6) highest emissions to ensure EUT compliance
using all installation combination.
All data was recorded in the peak detection mode. Quasi-peak and Average readings were only
performed when an emission was found to be marginal (within -10 dBμV of specification limits). Quasipeak readings are distinguished with a "QP". Average readings are distinguished with a "AV".
3.6 Summary of Test Results
According to the data in section 3.6, the EUT complied with the FCC Part 15 B Conducted margin,
with the worst margin reading of:
3.7 Disturbance Voltage Test Data
Temperature ( ℃ )
Humidity ( %RH )
Barometric Pressure ( mbar )
EUT
M/N
Operating Mode
22~25
50~55
950~1000
RFID Card reader
K-Kadex
Normal Operation
Test data see following pages
Remark: (1) When PK reading is less than relevant limit 20dB, the QP reading and AV reading will not
be recorded.
(2) Where QP reading is less than relevant AV limit, the AV reading will not be measured
3.8 Test Result
PASS
Report No.:BCT12FR-0905E
Page 9 of 23
FCC PART 15 SUBPART B Report
Conducted Emission Test Data :
EUT:
M/N:
Operating Condition:
Test Site:
Operator:
Test Specification:
Comment:
Start of Test:
Report No.:BCT12FR-0905E
RFID Card reader
K-Kadex
Normal Operation
Shielded Room
Cheng
AC 120V/60Hz for adapter
Live Line
6/28/12/15:43
Tem:25℃ Hum:50%
Page 10 of 23
FCC PART 15 SUBPART B Report
Conducted Emission Test Data:
EUT:
M/N:
Operating Condition:
Test Site:
Operator:
Test Specification:
Comment:
Start of Test:
Report No.:BCT12FR-0905E
RFID Card reader
K-Kadex
Normal Operation
Shielded Room
Cheng
AC 120V/60Hz for adapter
Neutral Line
6/28/12/ 15:46
Tem:25℃ Hum:50%
Page 11 of 23
FCC PART 15 SUBPART B Report
4 - RADIATED DISTURBANCES
4.1 Measurement Uncertainty
All measurements involve certain levels of uncertainties, especially in field of EMC. The factors
contributing to uncertainties are spectrum analyzer, cable loss, antenna factor calibration, antenna
directivity, antenna factor variation with height, antenna phase center variation, antenna factor
frequency interpolation, measurement distance variation, site imperfections, mismatch (average), and
system repeatability.
The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of a
radiation emissions measurement is 4.0 dB.
4.2 Limit of Radiated Disturbances
Frequency (MHz)
Distance (Meters)
Field Strengths Limits (dBμV/m)
30 ~ 88
3
40
88~216
3
43.5
216 ~ 960
3
46
960 ~ 1000
3
54
Note: (1) The tighter limit shall apply at the edge between two frequency bands.
(2) Distance refers to the distance in meters between the test instrument antenna and the
closest point of any part of the E.U.T.
4.3 EUT Setup
The radiated emission tests were performed in the in the 3-meter anechoic chamber, using the setup
accordance with the ANSI C63.4-2009. The specification used was the FCC Part 15 Subpart B limits.
The EUT was placed on the center of the test table.
Maximum emission emitted from EUT was determined by manipulating the EUT, support equipment,
interconnecting cables and varying the mode of operation and the levels in the final result of the test
were recorded with the EUT running in the operating mode that maximum emission was emitted.
Block diagram of test setup (In chamber)
Report No.:BCT12FR-0905E
Page 12 of 23
FCC PART 15 SUBPART B Report
4.4 Test RFID Card reader Setup
According to FCC Part 15 rule, the frequency was investigated from 30 to 1000 MHz. During the
radiated emission test, the test receiver was set with the following configurations:
Test RFID Card reader Setting:
Detector…………………………………..Peak & Quasi-Peak
IF Band Width……………………….…..120KHz
Frequency Range……………………….30MHz to 1000MHz
Turntable Rotated……………………….0 to 360 degrees
Antenna Position:
Height………………………………….…1m to 4m
Polarity…………………………………....Horizontal and Vertical
4.5 Test Procedure
Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with
all installation combinations.
All data was recorded in the peak detection mode. Quasi-peak readings performed only when an
emission was found to be marginal (within -10 dBμV of specification limits), and are distinguished with
a "QP" in the data table.
4.6 Corrected Amplitude & Margin Calculation
The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Factor, and
subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows:
Corr. Ampl. = Indicated Reading + Antenna Factor + Cable Factor - Amplifier Gain
The “Margin” column of the following data tables indicates the degree of compliance with the
applicable limit. For example, a margin of -7dBμV means the emission is 7dBμV below the maximum
limit for Subpart B. The equation for margin calculation is as follows:
Margin = Limit – Corr. Ampl.
4.7 Radiated Emissions Test Result
Temperature ( ℃ )
Humidity ( %RH )
Barometric Pressure ( mbar )
EUT
M/N
Operating Mode
22~25
50~54
950~1000
RFID Card reader
K-Kadex
Normal Operation
Test data see following pages
Remark: (1) When PK reading is less than relevant limit 20dB, the QP reading and AV reading will not
be recorded.
(2) Where QP reading is less than relevant AV limit, the AV reading will not be measured
4.8 Test Result
PASS
Report No.:BCT12FR-0905E
Page 13 of 23
FCC PART 15 SUBPART B Report
Radiated Emission Test Data:
EUT:
M/N:
Operating Condition:
Test Site:
Operator:
Test Specification:
Comment:
Start of Test:
Report No.:BCT12FR-0905E
RFID Card reader
K-Kadex
Normal Operation
CHAMBER
Li
AC 120V/60Hz for adapter
Polarization: Horizontal
6/28/12/23:13
Page 14 of 23
Tem:25℃ Hum:50%
FCC PART 15 SUBPART B Report
Radiated Emission Test Data:
EUT:
M/N:
Operating Condition:
Test Site:
Operator:
Test Specification:
Comment:
Start of Test:
Report No.:BCT12FR-0905E
RFID Card reader
K-Kadex
Normal Operation
CHAMBER
Li
AC 120V/60Hz for adapter
Polarization: Vertical
6/28/12/ 23:12
Tem:25℃ Hum:50%
Page 15 of 23
FCC PART 15 SUBPART B Report
APPENDIX A - EUT PHOTOGRAPHS
EUT – Fitting View
EUT – Front View
EUT – Rear View
Report No.:BCT12FR-0905E
Page 16 of 23
FCC PART 15 SUBPART B Report
EUT – Open View
EUT - PCB View
Report No.:BCT12FR-0905E
Page 17 of 23
FCC PART 15 SUBPART B Report
EUT - PCB View
Report No.:BCT12FR-0905E
Page 18 of 23
FCC PART 15 SUBPART B Report
EUT - PCB View
Report No.:BCT12FR-0905E
Page 19 of 23
FCC PART 15 SUBPART B Report
APPENDIX B - TEST SETUP PHOTOGRAPHS
Conducted Emission
Radiated Emission
Report No.:BCT12FR-0905E
Page 20 of 23
FCC PART 15 SUBPART B Report
APPENDIX C - BONTEK ACCREDITATION CERTIFICATES
Report No.:BCT12FR-0905E
Page 21 of 23
FCC PART 15 SUBPART B Report
Report No.:BCT12FR-0905E
Page 22 of 23
FCC PART 15 SUBPART B Report
Report No.:BCT12FR-0905E
Page 23 of 23
FCC PART 15 SUBPART B Report
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising