Type K/J /T/E/R/S, Pt 100 ohm
Type K/J /T/E/R/S, Pt 100 ohm
4 channels. T1, T2, T3, T4, T1-T2
SD card real time datalogger, RS232/USB
4 CHANNELS THERMOMETER
Model : ATE-2036
Your purchase of this 4
C H A N N E L S
THERMOMETER
with
S D
C A R D
DATALOGGER marks a
step forward for you
into
the
field
of
precision measurement.
Although this METER is
a complex and delicate
instrument, its durable
structure
will
allow
many years of use if
proper
operating
techniques
are
developed. Please read
the
following
instructions
carefully
and always keep this
manual
within
easy
reach.
OPERATION MANUAL
www.tmatlantic.com
TABLE OF CONTENTS
1. FEATURES.............................................................................1
2. SPECIFICATIONS...................................................................2
3. FRONT PANEL DESCRIPTION..................................................6
3-1 Display............................................................................6
3-2 Power Button ( ESC, Backlight Button )..............................6
3-3 Hold Button ( Next Button )...............................................6
3-4 REC Button ( Enter Button ).............................................6
3-5 Type Button ( ▲ Button, L Button )...................................6
3-6 T1-T2 Button ( ▼ Button, R Button ).................................6
3-7 SET Button ( Time check Button ).....................................6
3-8 Logger Button ( OFFSET Button, Sampling time check Butto6
3-9 T1,T2,T3,T4 input socket ( Type K, Type J ).......................6
3-10 PT1 input socket ( Pt 100 ohm ).....................................6
3-11 PT2 input socket ( Pt 100 ohm ).....................................6
3-12 RS-232 output terminal...................................................6
3-13 DC 9V adapter socket.....................................................6
3-14 Tripod Fix Nut................................................................6
3-15 Battery Cover Screws......................................................6
3-16 Battery compartment/Cover.............................................6
3-17 Stand............................................................................6
3-18 SD card socket...............................................................6
4. MEASURING PROCEDURE.......................................................7
4-1 Type K measurement........................................................7
4-2 Type J/T/E/R/S measurement............................................7
4-3 Pt 100 ohm measurement.................................................8
4-4 T1-T2 measurement.........................................................8
4-5 Data Hold........................................................................9
4-6 Data Record ( Max./ Min. reading )....................................9
4-7 LCD Backlight ON/OFF...................................................... 10
5. DATALOGGER........................................................................ 10
5-1 Preparation before execute datalogger function.................. 10
5-2 Auto Datalogger ( Set sampling time ≧ 1 second )............ 11
5-3 Manual Datalogger ( Set sampling time = 0 second )..........12
5-4 Check time information.....................................................12
5-5 Check sampling time information....................................... 13
5-6 SD Card Data structure..................................................... 13
6. Saving data from the SD card to the computer..........................14
7. ADVANCED SETTING.............................................................. 15
7-1 Set clock time ( Year/Month/Date, Hour/Minute/ Second )... 16
7-2 Decimal point of SD card setting........................................17
7-3 Auto power OFF management .......................................... 17
7-4 Set beeper Sound ON/OFF................................................ 18
7-5 Select the temperature unit to ℃ or ℉ ............................ 18
7-6 Set sampling time ........................................................... 19
7-7 SD memory card format....................................................19
8. POWER SUPPLY from DC ADAPTER..........................................20
9. BATTERY REPLACEMENT........................................................ 20
10. RS232 PC serial interface...................................................... 20
11. OFFSET ADJUSTMENT.......................................................... 22
12. Optional Type K Temp. probe................................................24
12. PATENT...............................................................................24
1. FEATURES
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Type K/J/T/E/R/S, Pt 100 ohm, measurement with 4 display.
Show 4 channels display on the LCD at the same time.
Type K : -100 to 1300 ℃.
Type J : -100 to 1200 ℃.
Pt 100 ohm : -199.9 to 850.0 ℃.
℃/℉, 0.1 degree/1 degree.
4 channels ( T1, T2, T3, T4 ), T1-T2.
Microcomputer circuit provides intelligent function
and high accuracy.
Offset adjustment for the Type K/J/T/E/R/S measurement.
Offset adjustment for the Pt 100 measurement.
Measuring unit can select to ℃ or ℉.
Real time SD memory card Datalogger, it Built-in Clock
and Calendar, real time data recorder, sampling time set
from 1 second to 3600 seconds.
Manual datalogger is available ( set the sampling
time to 0 second ), during execute the manual datalogger
function, it can set the different position ( location ) No.
( position 1 to position 99 ).
Innovation and easy operation, computer is not need to
setup extra software, after execute datalogger, just take
away the SD card from the meter and plug in the SD card
into the computer, it can down load the all the measured
value with the time information ( year/month/date/
hour/minute/second ) to the Excel directly, thenuser can
make the further data or graphic analysis by themselves.
SD card capacity : 1 GB to 16 GB.
LCD with green light backlight, easy reading.
Can default auto power off or manual power off.
Data hold, record max. and min. reading.
Microcomputer circuit, high accuracy.
Power by UM3/AA ( 1.5 V ) x 6 batteries or DC 9V adapter.
RS232/USB PC COMPUTER interface.
Heavy duty & compact housing case.
1
2. SPECIFICATIONS
2-1 General Specifications
Circuit
Display
Channels
Sensor type
Custom one-chip of microprocessor LSI
circuit.
LCD size : 52 mm x 38 mm
LCD with green backlight ( ON/OFF ).
T1, T2, T3, T4, T1-T2.
Type K thermocouple probe.
Type J/T/E/R/S thermocouple probe.
PT 100 ohm probe
* Cooperate with an 0.00385 alpha
coefficient, meet DIN IEC 751.
Resolution
0.1℃/1℃, 0.1℉/1 ℉.
Datalogger
Auto
1 second to 3600 seconds
@ Sampling time can set to 1 second,
Sampling Time
Setting range
but memory data may loss.
Manual Push the data logger button
once will save data one time.
@ Set the sampling time to
0 second.
@ Manual mode, can also select the
1 to 99 position ( Location ) no.
Memory Card
Advanced
setting
SD memory card. 1 GB to 16 GB.
* Set clock time ( Year/Month/Date,
Hour/Minute/ Second )
* Decimal point of SD card setting
* Auto power OFF management
* Set beep Sound ON/OFF
* Set temperature unit to ℃ or ℉
* Set sampling time
* SD memory card Format
2
Temperature
Compensation
Linear
Compensation
Offset
Adjustment
Probe Input
Socket
Automatic temp. compensation for the
type K/J/T/E/R/S thermometer.
Linear Compensation for the full range.
Over Indication
Data Hold
Memory Recall
Sampling Time
of Display
Data Output
Show " - - - - ".
Freeze the display reading.
Maximum & Minimum value.
Approx. 1 second.
Power off
Operating
Temperature
Operating
Humidity
Power Supply
Available for Type K/J/T/E/R/S and
Pt 100 ohm.
Type K/J/T/E/R/S
2 pin thermocouple socket.
Pt 100 ohm : Ear phone socket.
RS 232/USB PC computer interface.
* Connect the optional RS232 cable
UPCB-02 will get the RS232 plug.
* Connect the optional USB cable
USB-01 will get the USB plug.
Auto shut off saves battery life or
manual off by push button.
0 to 50 ℃.
Less than 85% R.H.
* AAlkaline or heavy duty DC 1.5 V battery
( UM3, AA ) x 6 PCs, or equivalent.
* ADC 9V adapter input. ( AC/DC power
adapter is optional ).
3
Power Current Normal operation ( w/o SD card save
data and LCD Backlight is OFF) :
Approx. DC 8.5 mA.
When SD card save the data but and
LCD Backlight is OFF) :
Approx. DC 30 mA.
* AIf LCD backlight on, the power
consumption will increase approx.
14 mA.
Weight
Dimension
Accessories
Included
Optional
Accessories
489 g/1.08 LB.
177 x 68 x 45 mm
(7.0 x 2.7x 1.9 inch)
* Instruction manual......................1 PC
* Type K thermocouple probe.
TP-01, TP-02A. TP-03, TP-04
* Pt 100 ohm probe, TP-101.
* SD Card ( 1 GB )
* SD Card ( 2 GB )
* USB cable, USB-01.
* RS232 cable, UPCB-02.
* Data Acquisition software,
SW-U801-WIN.
* AC to DC 9V adapter.
* Hard carrying case, CA-06.
* Soft carrying case, CA-05A.
2-2 Electrical Specifications (23± 5 ℃)
PT 100 ohm
Resolution
Range
Accuracy
0.1 ℃
-199.9 to 850.0 ℃
± ( 0.4 % + 1 ℃ )
0.1 ℉
-327.0 to 999.9 ℉
± ( 0.4 % + 1.8 ℉ )
1℉
1000 to 1562 ℉
± ( 0.4 % + 2 ℉ )
* Pt 100 ohm probe TP-101 is the optional accessory.
4
Type K/J/T/E/R/S
Sensor
Type
Type K
Resolution Range
0.1 ℃
1℃
0.1 ℉
Type J
1℉
0.1 ℃
1℃
0.1 ℉
Type T
1℉
0.1 ℃
0.1 ℉
Type E
0.1 ℃
0.1 ℉
Type R
1℉
1℃
1℉
Type S
1℃
1℉
Accuracy
-50.1 to -100.0 ℃
-50.0 to 999.9 ℃
1000 to 1300 ℃
-58.1 to -148.0 ℉
-58.0 to 999.9 ℉
1000 to 2372 ℉
-50.1 to -100.0 ℃
-50.0 to 999.9 ℃
1000 to 1150 ℃
-58.1 to -148.0 ℉
-58.0 to 999.9 ℉
1000 to 2102 ℉
-50.1 to -100.0 ℃
-50.0 to 400.0 ℃
-58.1 to -148.0 ℉
-58.0 to 752.0 ℉
-50.1 to -100.0 ℃
-50.0 to 900.0 ℃
-58.1 to -148.0 ℉
-58.0 to 999.9 ℉
1000 to 1652 ℉
0 to 600 ℃
601 to 1700 ℃
32 to 1112 ℉
1113 to 3092 ℉
0 to 600 ℃
601 to 1500 ℃
32 to 1112 ℉
1113 to 2732 ℉
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
1℃)
0.5 ℃
1℃)
1.8 ℉
1℉)
2℉)
1℃)
0.5 ℃
1℃)
1.8 ℉
1℉)
2℉)
1℃)
0.5 ℃
1.8 ℉
1℉)
1℃)
0.5 ℃
1.8 ℉
1℉)
2℉)
1℃)
1℃)
2℉)
2℉)
1℃)
1℃)
2℉)
2℉)
)
)
)
)
)
)
)
)
Remark :
a. Accuracy value is specified for the meter only.
b. Accuracy is tested under the meter's environment temperature
within 23 ± 5℃.
c. Linearity Correction :
Memorize the thermocouple's curve into the intelligent CPU
circuit,
@ Above specification tests under the environment RF Field Strength
less than 3 V/M & frequency less than 30 MHz only.
5
3. FRONT PANEL DESCRIPTION
Fig. 1
3-1 Display.
3-2 Power Button ( ESC, Backlight Button )
3-3 Hold Button ( Next Button )
3-4 REC Button ( Enter Button )
3-5 Type Button ( ▲ Button, L Button )
3-6 T1-T2 Button ( ▼ Button, R Button )
3-7 SET Button ( Time check Button )
3-8 Logger Button ( OFFSET Button, Sampling time check Button)
3-9 T1,T2,T3,T4 input socket ( Type K, Type J )
3-10 PT1 input socket ( Pt 100 ohm )
3-11 PT2 input socket ( Pt 100 ohm )
3-12 RS-232 output terminal
3-13 DC 9V adapter socket
3-14 Tripod Fix Nut
3-15 Battery Cover Screws
3-16 Battery compartment/Cover
3-17 Stand
3-18 SD card socket
6
4. MEASURING PROCEDURE
4-1 Type K measurement
1) Power on the meter by pressing the " Power button "
( 3-2, Fig. 1 ) once.
* After already power on the meter, pressing the
" Power button " once ( > 2 sec ) will turn off
the meter.
2) Meter default Temp. sensor type is Type K, the display
will show " K " indicator.
The default temperature unit is ℃ ( ℉ ), the method
to change the Temp. unit from ℃ to ℉ or ℉ to ℃,
please refer to Chapter 7-5, page 18.
3) Insert the Type K probes into the " T1, T2, T3, T4 input
socket " ( 3-9, Fig. 1 ).
The LCD will show the 4 channels ( T1, T2, T3, T4 )
temperature value at the same time.
* If the certain channels do not insert the temperature
probes, the relative channel display will show over
range " - - - - - ".
4-2 Type J/T/E/R/S measurement
All the measuring procedures are same as the Type K (
section 4-1 ) except to select the Temp. Sensor type to
" Type J/K/T/E/R/S " by pressing the " Type Button " ( 3-5,
Fig. 1 ) once in sequence until the up LCD display show
" J/T/E/R/S " indicator.
7
4-3 Pt 100 ohm measurement
1) All the measuring procedures are same as the Type K (
section 4-1 ) except to select the Temp. Sensor type to
" Pt " by pressing the " Type Button " ( 3-5, Fig. 1 )
once in sequence
until the right down LCD display show " Pt " text as :
Pt
2) Insert the Pt 100 ohm probe ( optional, PT-101 ) to
PT1 input socket ( 3-10, Fig. 1 )
PT2 input socket ( 3-11, Fig. 1 )
* The Pt 100 ohm measurement only allow
max. two channels ( two probes ) input.
4-4 T1-T2 measurement
If the meter already insert two probes :
Type K/J/T/E/R/S : T1, T2 input socket
Pt 100 ohm : PT1, PT2 input socket
Pressing the " T1-T2 button " ( 3-6, Fig. 1 ), display will
show the difference temperature value between T1, T2
( PT1, PT2 ) as :
T1
T2
T1 ℃
26.2
T2 ℃
26.6
℃
1-2
℃
-0.4
8
T1-T2 value
4-5 Data Hold
During the measurement, press the " Hold Button " ( 3-3,
Fig. 1 ) once will hold the measured value & the LCD will
display a " HOLD " symbol.
Press the " Hold Button " once again will release the data
hold function.
4-6 Data Record ( Max., Min. reading )
1) The data record function records the maximum and
minimum readings. Press the " REC Button " ( 3-4, Fig.
1 ) once to start the Data Record function and there
will be a " REC " symbol on the display.
2) With the " REC " symbol on the display :
a) Press the " REC Button " ( 3-4, Fig. 1 ) once, the
" REC MAX " symbol along with the maximum value
will appear on the display.
If intend to delete the maximum value, just press
the " Hold Button " ( 3-3, Fig. 1 ) once, the display
will show the " REC " symbol only & execute the
memory function continuously.
b)Press the " REC Button " ( 3-4, Fig. 1 ) again, the
" REC MIN " symbol along with the minimum value
will appear on the display.
If intend to delete the minimum value, just press the
" Hold Button " ( 3-3, Fig. 1 ) once, the display will
show the " REC " symbol only & execute the
memory function continuously.
c) To exit the memory record function, just press the
" REC " button > 2 seconds at least. The display will
revert to the current reading.
9
4-7 LCD Backlight ON/OFF
After power ON, the " LCD Backlight " will light
automatically. During the measurement, press the
" Backlight Button " ( 3-2, Fig. 1 ) once will turn OFF the
" LCD Backlight ".
Press the " Backlight Button " once again will turn ON the
" LCD Backlight " again.
5. DATALOGGER
5-1 Preparation before execute datalogger function
a. Insert the SD card
Prepare a " SD memory card " ( 1 GB to 16 GB, optional ),
insert the SD card into the " SD card socket " ( 3-18, Fig. 1).
The front panel of the SD card should face against the
down case.
b. SD card Format
If SD card just the first time use into the meter, it
recommend to make the " SD card Format " at first. ,
please refer chapter 7-7 ( page 19 ).
c. Time setting
If the meter is used at first time, it should to adjust the
clock time exactly, please refer chapter 7-1 ( page 16 ).
d. Decimal format setting
The numerical data structure of SD card is
default used the " . " as the decimal, for
example "20.6" "1000.53" . But in certain
countries ( Europe ...) is used the " , " as the
decimal point, for example " 20, 6 "
"1000,53". Under such situation, it should
change the Decimal character at first, details
of setting the Decimal point, refer to Chapter
7-2, page 17.
10
5-2 Auto Datalogger ( Set sampling time ≧ 1 second )
a. Start the datalogger
Press the " REC Button ( 3-4, Fig. 1 ) once , the LCD will
show the text " REC ", then press the " Logger Button "
( 3-8, Fig. 1 ), the " REC " will flashing and beeper will
sound, at the same time the measuring data along the
time information will be saved into the memory circuit.
Remark :
* How to set the sampling time, refer to Chapter 7-6,
page 19.
* How to set the beeper sound is enable, refer to
Chapter 7-4, page 18.
b. Pause the datalogger
During execute the Datalogger function , if press the
" Logger Button " ( 3-8, Fig. 1 ) once will pause the
Datalogger function ( stop to save the measuring data
into the memory circuit temporally ). In the same time
the text of " REC " will stop flashing.
Remark :
If press the " Logger Button " ( 3-8, Fig. 1 ) once again
will execute the Datalogger again, the text of " REC " will
flashing .
c.. Finish the Datalogger
During pause the Datalogger, press the " REC Button "
( 3-4, Fig. 1) continuously at least two seconds, the " REC "
indicator will be disappeared and finish the Datalogger.
11
5-3 Manual Datalogger ( Set sampling time = 0
second )
a. Set sampling time is to 0 second
Press the " REC Button ( 3-4, Fig. 1 ) once , the LCD will
show the text " REC ", then press the " Logger Button "
( 3-8, Fig. 1 ) once, the " REC " will flashing once and
Beeper will sound once, at the same time the measuring
data along the time information and the Position no. will
be saved into the memory circuit.
Remark :
* For the 4 channels measurement, the right lower
Display will show the Position/Location no. ( P1, P2...
P99 ) and the T4 measurement value alternately.
* During execute the Manual Datalogger, use
the " ▲ Button " ( 3-5, Fig. 1) or " ▼ Button " ( 3-6,
Fig. 1 ) to set the measuring position ( 1 to 99, for
example room 1 to room 99 ) to identify the
measurement location.
b. Finish the Datalogger
Press the " REC Button " ( 3-4, Fig. 1) continuously at
least two seconds, the " REC " indication will be
disappeared and finish the Datalogger.
5-4 Check time information
During the normal measurement ( not execute the
Datalogger ), If press " Time check Button " ( 3-7, Fig. 1
) once , the lower LCD display will present the time
information of Year/Month, Date/Hour, Minute/Second.
12
5-5 Check sampling time information
During the normal measurement ( not execute the
Datalogger ), If press " Sampling Button " ( 3-8, Fig. 1 )
once , the lower LCD display will present the Sampling
time information in second unit.
5-6 SD Card Data structure
1) When the first time, the SD card is used into the meter,
the SD card will generate a folder :
TMA01
2) If the first time to execute the Datalogger,
under the route TMA01\, will generate a new
file name TMA01001.XLS.
After exist the Datalogger, then execute again,
the data will save to the TMA01001.XLS until
Data column reach to 30,000 columns, then
will generate a new file, for example TMA01002.XLS
3) Under the folder TMA01\, if the total files more
than 99 files, will generate anew route, such as
TMA02\ ........
4) The file's route structure :
TMA01\
TMA01001.XLS
TMA01002.XLS
.....................
TMA01099.XLS
TMA02\
TMA02001.XLS
TMA02002.XLS
.....................
TMA02099.XLS
TMAXX\
.....................
.....................
Remark : XX : Max. value is 10.
13
6. Saving data from the SD card
to the computer ( EXCEL software )
1) After execute the Data Logger function, take away the
SD card out from the " SD card socket " ( 3-18, Fig. 1 ).
2) Plug in the SD card into the Computer's SD card slot
( if your computer build in this installation ) or
insert the SD card into the " SD card adapter ". then
connect the " SD card adapter " into the computer.
3) Power ON the computer and run the " EXCEL software ".
Down load the saving data file ( for example the file
name : TMA01001.XLS, TMA01002.XLS ) from the SD
card to the computer. The saving data will present into
the EXCEL software screen ( for example as following
EXCEL data screens ) , then user can use those EXCEL
data to make the further Data or Graphic analysis
usefully.
EXCEL data screen ( for example )
14
EXCEL graphic screen ( for example )
7. ADVANCED SETTING
Under do not execute the Datalogger function,
press the " SET Button " ( 3-7, Fig. 1 ) continuously at
least two seconds will enter the " Advanced Setting " mode.
then press the " Next Button " (3-3, Fig. 1 ) once a while
in sequence to select the seven main function, the lower
display will show :
dAtE......Set clock time ( Year/Month/Date, Hour/Minute/
Second )
dEC.......Set SD card Decimal character
PoFF..... Auto power OFF management
bEEP.....Set beeper sound ON/OFF
t-CF...... Select the Temp. unit to ℃ or ℉
SP-t...... Set sampling time ( Hour/Minute/Second )
Sd F..... SD memory card Format
15
Remark :
During execute the " Advanced Setting " function,
if press " ESC Button " ( 3-2, Fig. 1 ) once will exit
the " Advanced Setting " function, the LCD will
return to normal screen.
7-1 Set clock time ( Year/Month/Date,
Hour/Minute/ Second )
When the lower display show " dAtE "
1) Press the " Enter Button " ( 3-4, Fig. 1 ) once,
Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button "
( 3-6, Fig. 1 ) to adjust the value ( Setting start from
Year value ). After the desired value is set, press the
" Enter Button " ( 3-4, Fig. 1 ) once will going to
next value adjustment ( for example, first setting
value is Year then next to adjust Month, Date, Hour,
Minute, Second value ).
2) After set all the time value ( Year, Month, Date, Hour,
Minute, Second ),
the screen will jump to " SD card Decimal character "
setting screen ( Chapter 7-2 ).
Remark :
After the time value is setting, the internal clock will
run precisely even Power is off ( The battery is under
normal condition, no low battery condition ).
16
7-2 Decimal point of SD card setting
The numerical data structure of SD card is default used
the " . " as the decimal, for example "20.6" "1000.53" .
But in certain countries ( Europe ...) is used the " , " as
the decimal point, for example " 20,6 " "1000,53".
Under such situation, it should change the Decimal
character at first.
When the lower display show " dEC "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button "
( 3-6, Fig. 1 ) to select the upper value to " bASI " or
" Euro ".
bASI - Use " . " as the Decimal point with default.
Euro - Use " , " as the Decimal point with default.
2) After select the upper text to " bASI " or " Euro ",
press the " Enter Button " ( 3-4, Fig. 1 ) will save the
setting function with default.
7-3 Auto power OFF management
When the lower display show " PoFF "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button "
( 3-6, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Auto Power Off management will enable.
no - Auto Power Off management will disable.
2) After select the upper text to " yES " or " no ", press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
17
7-4 Set beeper sound ON/OFF
When the lower display show " bEEP "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button "
( 3-6, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Meter's beep sound will be ON with default.
no - Meter's beep sound will be OFF with default.
is power ON.
2) After select the upper text to " yES " or " no ", press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
7-5 Select the Temp. unit to ℃ or ℉
When the lower display show " t-CF "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button "
( 3-6, Fig. 1 ) to select the upper Display text to " C " or
" F ".
C - Temperature unit is ℃
F - Temperature unit is ℉
2) After Display unit is selected to " C " or " F ", press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
18
7-6 Set sampling time ( SecondS )
When the lower display show " SP-t "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button " (
3-6, Fig. 1 ) to adjust the value ( 0, 1, 2, 5, 10, 30,60,
120, 300, 600, 1800,3600 seconds ).
Remark :
If select the sampling time to " 0 second ", it is ready
for manual Datalogger.
2) After the Sampling value is selected, press the
" Enter Button " ( 3-4, Fig. 1 ) will save the setting
function with default.
7-7 SD memory card Format
When the lower display show " Sd F "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button " (
3-6, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Intend to format the SD memory card
no - Not execute the SD memory card format
2) If select the upper to " yES ", press the " Enter Button
" ( 3-4, Fig. 1 ) once again, the Display will show text
" yES Ent " to confirm again, if make sure to do the
SD memory card format, then press " Enter Button "
once will format the SD memory clear all the existing
data that already saving into the SD card.
19
8. POWER SUPPLY from DC
ADAPTER
The meter also can supply the power supply from the
DC 9V Power Adapter ( optional ). Insert the plug of
Power Adapter into " DC 9V Power Adapter Input Socket "
( 3-13, Fig. 1 ). The meter will permanent power ON
when use the DC ADAPTER power supply ( The power
Button function is disable ).
9. BATTERY REPLACEMENT
1) When the left corner of LCD display show "
", it
is necessary to replace the battery. However, in-spec.
measurement may still be made for several hours after
low battery indicator appears before the instrument
become inaccurate.
2) Loose the " Battery Cover Screws " ( 3-15, Fig. 1 )
and take away the " Battery Cover " ( 3-16, Fig. 1 )
from the instrument and remove the battery.
3) Replace with DC 1.5 V battery ( UM3, AA,
Alkaline/heavy duty ) x 6 PCs, and reinstate the cover.
4) Make sure the battery cover is secured after changing
the battery.
10. RS232 PC SERIAL INTERFACE
The instrument has RS232 PC serial interface via a 3.5
mm terminal ( 3-12, Fig. 1 ).
The data output is a 16 digit stream which can be
utilized for user's specific application.
A RS232 lead with the following connection will be
required to link the instrument with the PC serial port.
20
Meter
PC
(9W 'D" Connector)
Center Pin........................ Pin 4
(3.5 mm jack plug)
Ground/shield..................... Pin 2
2.2 K
resistor
Pin 5
The 16 digits data stream will be displayed in the
following format :
D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0
Each digit indicates the following status :
D15
Start Word
D14
4
D13
D12, D11
D10
D9
D8 to D1
D0
When send the upper display data = 1
When send the lower display data = 2
Annunciator for Display
℃ = 01
℉ = 02
Polarity
0 = Positive 1 = Negative
Decimal Point(DP), position from right to the
left
0 = No DP, 1= 1 DP, 2 = 2 DP, 3 = 3 DP
Display reading, D1 = LSD, D8 = MSD
For example :
If the display reading is 1234, then D8 to
D1 is : 00001234
End Word
21
RS232 FORMAT : 9600, N, 8, 1
Baud rate
Parity
Data bit no.
Stop bit
9600
No parity
8 Data bits
1 Stop bit
11. OFFSET ADJUSTMENT
11-1 Type K/J/T/E/R/S offset adjustment
1) Set the function to Type K ( or other type J/E/R/T/S ).
2) Insert the probe to the T1 input socket ( 3-9, Fig. 1 )
3) Pressing " Offset button " ( 3-8, Fig. 1 )
continuously at least two seconds then release,
the display will show :
SEt
23.7
measuring
value
oFS
23.7
adjust
value
* If not insert probe
to T1 input socket
it will show " Err "
* Use the " ▲ button "( 3-5, Fig. 1 ) " ▼ button " ( 3-6
Fig. 1 ) to adjust the desiring value on right bottom
display.
* Pressing " Enter button " ( 3-4, Fig. 1 ) once, the
adjustment value will save into memory then return
to normal measuring screen and finish the offset
adjustment procedures.
* The above offset adjustment for Type K/J/T/E/R/S is
valid for T1, T2, T3, T4 at the same time.
7-2 Pt 100 ohm offset adjustment
1) Set the function to Pt 100 ohm.
2) Insert the Pt 100 ohm probe to the PT1 ( PT2 ) input socket.
22
3) Pressing " Offset button " ( 3-8, Fig. 1 )
continuously at least two seconds then release, the
display will show :
SEt
Pt 1
oFS
Pt 2
4) If intend to make the offset adjustment for Pt 1, it should
insert the probe to PT1 input socket. Pressing " L button "
( 3-5, Fig. 1 ) once, the display will show example as
following.
If intend to make the offset adjustment for Pt 2, it should
insert the probe to PT2 input socket. Pressing " R button "
( 3-6, Fig. 1 ) once, the display will show example as
following.
SEt
23.7
measuring
value
oFS
23.7
adjust
value
* If not insert probe
to PT1, PT2 input
socket, it will show
" Err "
* Use the " ▲ button "( 3-5, Fig. 1 ) " ▼ button " ( 3-6,
Fig. 1 ) to adjust the desiring value on right bottom
display.
* Pressing " Enter button " ( 3-4, Fig. 1 ) once, the
adjustment value will save into memory then return
to normal measuring screen and finish the offset
adjustment procedures.
* The above offset adjustment for Pt 100 ohm is
valid for PT1, PT2 individually.
23
12. Optional Type K Temp. probe
(Type K) TP-01
Thermocouple
Probe
(Type K), TP-02A
Thermocouple
Probe
(Type K), TP-03
Surface Probe
(Type K), TP-04
* Max. short-tern operating
Temperature: 300 ℃ (572 ℉).
* It is an ultra fast response
naked-bead thermocouple
suitable for many general purpose
application.
* Measure Range: -50 ℃ to 900 ℃,
-50 ℉ to 1650 ℉.
* Dimension:10cm tube, 3.2mm Dia.
* Measure Range: -50 ℃ to 1200 ℃,
-50 ℉ to 2200 ℉.
* Dimension: 10cm tube, 8mm Dia.
* Measure Range: -50 ℃ to 400 ℃,
-50 ℉ to 752 ℉.
* Size :
Temp. sensing head - 15 mm Dia.
Probe length - 120 mm.
13. PATENT
The meter ( SD card structure ) already get
patent or patent pending in following countries :
Germany
Nr. 20 2008 016 337.4
JAPAN
3151214
TAIWAN
M 358970
M 359043
CHINA
ZL 2008 2 0189918.5
ZL 2008 2 0189917.0
USA
Patent pending
24
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising