Keri MS 3000 Proximity Reader

Keri MS 3000 Proximity Reader
MS Series Proximity Readers
• Sleek Attractive Packages
• Ultra Thin Profile
• Smallest Door Frame
(Mullion) Reader Available
• Better Read Range
Performance Than
Competing Products of
Similar Size
The MS-7000 SuperStar™ Reader measures just 8.5” long x 6” wide x 0.83” thick (21.6cm x 15.2cm x
2.1cm), with a read range of up to 14” (35cm). This reader is designed for applications where greater read
range adds to the convenience of the system, such as parking access or physically challenged access.
The readers are attractively designed with a thin profile and modern appearance. The readers are compatible
with all of Keri's proximity card styles as well as the small, extremely robust Keri Key Tag. Additionally, they
can read any Indala ASP Card or Tag if they are to be used in conjunction with a PXL-500 Controller.
1530 Old Oakland Road, Suite 100
San Jose, CA 95112 USA
(800) 260-5265 • (408) 451-2520 • Fax (408) 441-0309
MS Series Proximity Readers
The smallest readers in the series are the MS-3000 MicroStar™ Reader and the MS-5000 MiniStar™ Reader.
The MicroStar Reader measures just 3.4" long x 1.4" wide x 0.38" thick (86mm x 36mm x 10mm) thick, and is
designed to mount on a metal window or door frame (mullion) or directly on a wall. Read range is up to 4"
(10cm). The MiniStar Reader measures 4.3" long x 3.0" wide x 0.38" thick (109mm x 76mm x 10mm), and
can be mounted on a single gang electrical box or flat on a wall. Read range is up to 6" (15cm) when
mounted at least one inch off metal. If the reader is mounted using a metal electrical junction box with the
thickness of the wall material separating the reader from the box, read range will be reduced.
Keri's MS Series Proximity Readers are designed to blend aesthetics, read range performance, and small
package size with an extremely thin profile into a product that is priced significantly less than competing
proximity readers. The readers are for use exclusively with Keri's revolutionary access control system based on
the PXL-500 Tiger II Controller and were designed by some of the industry's top RF engineers, with many
years of experience in proximity reader design.
MS Series Proximity Readers
3.4" H x 1.4” W x 0.38" T
(86mm x 36mm x 10mm)
4.3" H x 3.0" W x 0.38" T
(109mm x 76mm x 10mm)
8.5" H x 6" W x 0.83" T
(21.6cm x 15.2cm x 2.1cm)
2.1 oz. (59g)
3.2 oz. (90g)
1.3 lbs. (582g)
Read Range*
Up to 4" (10cm)
Up to 6" (15cm)
Up to 14" (35cm)
Input Voltage
+12 VDC nom. (5-14 VDC)
+12 VDC nom. (5-14 VDC)
+11 VDC to +14 VDC
Current Draw
50 mA typical
100 mA typical
200 mA typical
Operating Temperature
-40˚ C to +65˚C
2.0" (5mm) I.D.
LED Indicator
Tri-Color Standard (Red, Green, Amber)
8.5" (215mm)
125 KHz excitation, 62.5 KHz data return
6.6" (169 mm)
Audio Tone
Lifetime warranty against defects in materials
and workmanship.
2.16" (55mm)
6.0" (152mm)
Specifications subject to change without notice.
Trademarks are the property of their respective owners.
* Read range is stated in a clean RF and electrical environment
with KC-10X card presented parallel to reader surface.
Presented By:
April 2003
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF