211-37-520 Series Pressure and Temperature Transducer

211-37-520 Series Pressure and Temperature Transducer
Product Data Sheet
January 2016
211-37-520-DS, Rev J
Paine 211-37-520 Series Pressure Transducer
mV/V, Downhole, HP/HT, +204 °C, Ranges to 30,000 PSIA (2068 BAR)
The 211-37-520 Series is our High Pressure/High Temperature (HP/HT) combination transducer is
designed for +400 °F (+204 °C) offshore oil, gas and power industry requirements. The 211-37-520
Series, based on its small size, all welded construction and ability to perform in corrosive
environments, is the best solution for new downhole tool and process equipment design when
temperatures are going to reach +400 °F (+204 °C).
Many new exciting industries are now using the 211-37-520 Series because if it's rugged construction,
accuracy, stability and long term repeatability.
Paine 211-37-520-DS
Solutions

High Pressure and High Temperature Measurement.

All-Welded, Sealed Construction.

Harsh/Extreme Environment Ready.
January 2016
Specifications
Calibration: Calibration Certificates are supplied with each unit
and available on-line.
Performance
Potential Applications

Wireline and Rotary Steering Tools.

Hydraulic Flow Pressure and Temperature Monitoring.

Oil and Gas Exploration and Production.

MWD, PWD and LWD tools.
Features

Full Scale (F.S.) Sensitivity: 2.6 mV/V nominal.

Total Error Band (Non-Linearity, Hysteresis and Thermal
Effects): ± 0.75% Full Scale (F.S.).

Output: mV/V.

Operating Temperature: -40 °F to +400 °F
(-40 °C to +204 °C).

Pressure Range: 0-5,000 to 0-30,000 psia (344 to 2068 bar).

Operating Media: Compatible with alloy UNS NO7718
solution annealed and aged to a minimum hardness of
40HRC.

Pressure Fitting: Per MS33656-E3.
Full Scale (F.S.) Sensitivity: 2.6 mV/V nominal.
Total Error Band (Non-Linearity, Hysteresis and Thermal
Effects): ± 0.75% Full Scale (F.S.).
Non-Linearity and Hysteresis Combined: ±0.150% of F.S.
maximum (BSLM).
Output at Zero Pressure: 0 ± 2.0% full scale.
Platinum Resistance Temperature Detector (RTD): 0 °C,
1000 Ω ± 0.06% Ω to IEC 751, Class A, Alpha = 0.00385 nominal.
Sustained Pressure/Temperature Stability: When pressurized
to F.S. pressure at 350 °F, F.S. output will not shift more than
0.05% F.S. in 14 days nor more than ± 0.07% F.S. in 60 days.
Compensated: This sensor compensated for temperature
effects on signal.
Environmental
Environmental: Error due to combined effect of shock,
vibration and acceleration shall be less than 0.01% of F.S.O. per
G.
Operating Temperature Range: -40 °F to +400 °F
(-40 °C to +204 °C).
Compensated Temperature Range: +75 °F to +350 °F
(+23 °C to +176 °C).
Contents
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2
Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
EmersonProcess.com/Paine
January 2016
Paine 211-37-520-DS
Mechanical
Pressure Range: Contact factory for additional pressure ranges.
Pressure table
Standard part
number
Pressure range
PSIA (BAR)
Proof pressure Burst pressure Replaceable seal
PSIA (BAR)
PSIA (BAR)
part number
211-37-520-01
0-5,000 (0-344)
7,500 (517)
10,000 (689)
247-99-250-01
211-37-520-02
0-10,000 (0-689)
15,000 (1034)
20,000 (1378)
247-99-250-01
211-37-520-03
0-15,000 (0-1034) 18,750 (1292)
22,500 (1551)
247-99-250-01
211-37-520-04
0-20,000 (0-1378) 25,000 (1723)
30,000 (2068)
247-99-250-01
211-37-520-05
0-22,500 (0-1551) 28,125 (1939)
30,000 (2068)
247-99-250-01
211-37-520-06
0-25,000 (0-1723) 31,250 (2154)
33,000 (2275)
247-99-250-01
211-37-520-07
0-30,000 (0-2068) 37,500 (2585)
40,000 (2757)
247-99-250-02
External Case Pressure: Up to 20,000 psi (1378 bar).
Pressure Media: Any compatible with alloy UNS NO7718
solution annealed and aged to a minimum hardness of 40HRC.
Pressure Fitting: Per MS33656-E3.
Installation Information: Mount on port using annealed alloy
600 Replaceable Seal. Thermal coefficient of the mounting
expansion should not exceed 8.3 x 10^ -6 in/in °F for operation
above 100 °C.
Recommended Installation Torque: 125 to 150 in-lb
(14-17 Nm).
Electrical
Excitation: 1 to 20 VDC (10 VDC nominal).
Input Resistance: 1500 ± 300 Ω.
Output Resistance: 1500 ± 150 Ω.
Insulation Resistance: All conductors together to case, 10 GΩ
minimum at 50 VDC and +77 °F (+25 °C).
Electrical Connections: High temperature solderable pins.
EmersonProcess.com/Paine
3
Paine 211-37-520-DS
January 2016
Dimensional Drawings
Figure 1. 211-37-520 Series
A
F
Ø .50
B
E
D
7/16 hex
C
.27 max
1.50 max
Connections
.49 max
Ø .187
.182
G
PIN
Function
A
+ Excitation
B
+ Signal
C
- Signal
D
- Excitation
E
R.T.D.
F
R.T.D.
A - F. See Connections table
G. Fitting end per MS33656-E3
Dimensions are inches.
4
EmersonProcess.com/Paine
January 2016
Paine 211-37-520-DS
This page is intentionally left blank.
EmersonProcess.com/Paine
5
Paine 211-37-520-DS
Product Data Sheet
211-37-520-DS, Rev J
January 2016
Linkedin.com/company/Emerson-Process-Management
Twitter.com/Rosemount_News
Facebook.com/Rosemount
Youtube.com/user/RosemountMeasurement
Rosemount Specialty Product LLC
Emerson Process Management
5545 Nelpar Drive
East Wenatchee, WA 98822, USA
+1 509 881 2100
+1 509 881 2115
Paine.Products@Emerson.com
Google.com/+RosemountMeasurement
Standard Terms and Conditions of Sale can be found at:
EmersonProcess.com/Rosemount
The Emerson logo is a trademark and service mark of Emerson Electric Co.
The Paine brand and Paine logotype are trademarks of Emerson Electric Co.
All other marks are the property of their respective owners.
© 2016 Emerson Process Management. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising