LU100/MED Specification Sheet e Sodium Lamps Project:

LU100/MED Specification Sheet e Sodium Lamps Project:
Specification Sheet
LU100/MED
12/13/2011
Project:
High Pressure Sodium Lamps
High Pressure Sodium
100 Watt ED17 (Clear) Lamp
Catalog#:
Approved by:
Ordering Information
Howard Catalog Number (Ordering Code)
LU100/MED
UPC Code
01186
ANSI Designation
S54
Description
High Pressure Sodium
Package Quantity
12
Physical Characteristics
MOL
LCL
Bulb Size
ED17
Bulb Finish
Clear
Base
Medium
MOL (Maximum Overall Length)
5.43
LCL (Light Center Length)
3.43
Operating Characteristics
Lamp Watts (Nominal)
100
Approx. Initial Lumens
9,500
Approx. Mean Lumens
8,550
Average Rated Life (Hours)
24,000
Color Temperature (K)
2,100
CRI (Color Rendering Index)
22
Operating Position
Universal
Note:
1. If the outer glass is broken, shut off the power immediately and remove the
lamp after it has cooled.
2. Use only auxiliary equipment meeting ANSI standards. Use within voltage
limits recommended by ballast manufacturer.
3. Protect lamp base, socket and wiring against moisture, corrosive atmospheres and excessive heat.
4. Replace the lamp if the outer glass bulb has been scratched, cracked or
damaged in any way.
5. Do not use this lamp in a fixture, which redirects a substantial portion of the
energy toward the arc tube and its immediate vicinity, as this may lead to early
lamp failure.
6. Take care in handling and disposing of lamps. If arc tube is broken, avoid
skin contact with any of the contents or fragments.
7. The arc tube of this lamp contains sodium and mercury. Although this product meets TCLP, please dispose in accordance with federal, state and local
requirements.
8. WARNINGS, CAUTIONS and OPERATING INSTRUCTIONS for
High Pressure Sodium Lamps: These lamps must be operated
in fixtures designed for use with High Pressure Sodium Lamps.
The fixture wattage (rating) must match the wattage indicated on the outer
glass bulb. Do not scratch the outer bulb or subject it to pressure as this could
cause the outer bulb to crack or shatter.
Operating the lamp improperly may result in PERSONAL INJURY, PROPERTY
DAMAGE, BURNS and FIRE.
9. Specifications subject to change. Actual results may very.
Howard Lighting Products | 580 Eastview Drive | Laurel, MS 39443
(toll free) 800.956.3456 | (direct) 601.422.0033 | (fax) 601.422.1652
www.HowardLightingProducts.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising