Product profile RFID Tag • Rugged encapsulation for harsh environments • Consistent UHF range performance worldwide • Gen 2 and ISO 18000-6B versions • Superior performance on a variety of materials • Reusable for lower cost per use UHF Small Rigid RFID Tag Intermec’s Small Rigid Tag (SRT) is a truly passive UHF RFID tag designed for superior performance on a variety of surfaces. The tag available in both EPC Global Class 1, Generation 2 (Gen 2) and ISO 18000-6B protocols, combines an impressive range with a rugged yet compact design, suitable for harsh industrial applications, and survival in application temperatures up to 250° F (121° C). Additionally, the small rigid tags have a wide band antenna design, which allows for a single tag to be used virtually anywhere in the world and on a variety of surfaces, including metal, plastic and wood. The Small Rigid Tags are ideal for industrial applications where ruggedness, chemical resistance or higher temperature ratings are required and where tag size is an important consideration. Typical applications include: • Reusable plastic containers (RPC) • Metal cages • Pallets • Unit Loading Devices (ULD) • Gas cylinders • Beer kegs & other commercial beverage containers • Hazmat containers • Chemical containers Attachment Methods The tags can be attached using screws, rivets, double-sided adhesive strips, or a variety of other methods appropriate for the application. Each tag has two mounting holes for up to #6 hardware (not included). Reader Compatibility Intermec manufactures a complete line of readers that are compatible with the small Rigid Tags as indicated in the table below. Tag Type Intermec Reader Models EPC Global Gen 2 IP4 Hand-Held Reader IF4 Fixed Serial Reader IF5 Fixed Network Reader IV7 Vehicle Mount Reader ISO 180006B IP3 Hand-Held Reader IP4 Hand-Held Reader Pennsylvania Fixed Serial Reader IF4 Fixed Serial Reader IF5 Fixed Network Reader IV7 Vehicle Mount Reader Competitive readers conforming to the Gen 2 and ISO 18000-6B protocols can also read the tags conforming to these respective protocols. Chemical Resistance The Rigid Tags are tested for resistance to the following chemicals. • • • • • • • • • Machining oil and fluid (long-term exposure) Gasoline Motor oil Methyl Ethyl Ketone (MEK) Isopropyl alcohol Methyl alcohol Mineral spirits Acetone Kerosene Optimal Frequencies of Operation • ISO 18000-6B: 860 MHz to 930 MHz • EPCglobal Gen 2: 860 MHz to 960 MHz Read Range Performance of Small Gen 2 Rigid Tag Read Range (ft) Temperature Ratings The new Intermec Rigid Tags are rated for applications with temperatures ranging from -40° to 250° F (-40° to 121° C). Frequency (MHz) Note Actual range performance may vary depending on power output, temperature and other environmental factors. Size 1.22 in x 3.11 in (3.10 cm x 7.90 cm) Available Silicon & Memory Size Silicon Type Memory Size Comments EPC Global Class 1 Generation 2 Impinj Monza 96 bits Unprogrammed ISO 18000-6B Philips UCODE HSL 2048 bits Includes pre-programmed and locked unique ID per ISO 18000-6B specification Air Interface North America Corporate Headquarters 6001 36th Avenue West Everett, Washington 98203 Phone: (425) 348-2600 Fax: (425) 355-9551 South America & Mexico Headquarters Office Newport Beach, California Phone: (949) 955-0785 Fax: (949) 756-8782 Europe/Middle East & Africa Headquarters Office Reading, United Kingdom Phone: +44 118 923 0800 Fax: +44 118 923 0801 Sales Toll Free NA: (800) 934-3163 Toll in NA : (425) 348-2726 Freephone ROW: 00 800 4488 8844 Toll ROW : +44 134 435 0296 Asia Pacific Headquarters Office Singapore Phone: +65 6303 2100 Fax: +65 6303 2199 OEM Sales Phone: (425) 348-2762 Internet www.intermec.com Worldwide Locations: www.intermec.com/locations Customer Service and Support Toll Free NA: (800) 755-5505 Toll in NA : (425) 356-1799 Media Sales Phone: (513) 874-5882 Copyright © 2007 Intermec Technologies Corporation. All rights reserved. Intermec is a registered trademark of Intermec Technologies Corporation. All other trademarks are the property of their respective owners. Printed in the U.S.A. 611767-01A 03/07 In a continuing effort to improve our products, Intermec Technologies Corporation reserves the right to change specifications and features without prior notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project