SVC-SWI-0015_01_Curved_Baffle_Style_Mulch_Kit_Instructions-3_Blade_Decks

SVC-SWI-0015_01_Curved_Baffle_Style_Mulch_Kit_Instructions-3_Blade_Decks
Wright Manufacturing, Inc.
Work Inst. Name: Curved Baffle Style Mulch Kit
Instructions- 3 Blade Decks
Inst. Number: SVC-SWI-0015
Revision: 01
Issue Date: N/A
Author: Chris Sturtz
Date: 2/26/15
Reviewer: Chris Sturtz
Date: 2/26/15
Approver: Chris Sturtz
Date: 2/26/15
48”, 52”, 61” Two Piece (3 bladed) Mulch Kit Instructions
Curved baffle style Kit



1)
2)
3)
4)
5)
6)
7)
Hardware 48” – 7ea. 3/8 x ¾ Flange Bolts
7ea. 3/8 Lock Flange Nuts
Hardware 52” – 8ea. 3/8 x ¾ Flange Bolts
8ea. 3/8 Lock Flange Nuts
Hardware 61” – 6ea. 3/8 x ¾ Flange Bolts
6ea. 3/8 Lock Flange Nuts
*NOTE: The Mulching kits are designed to function optimally with no less than 4blade washers.
Raise and secure machine.
Make sure to use all safety precautions.
Clean bottom of deck thoroughly.
For easier installation blades should be in horizontal position.
Put single blade section (opposite discharge side) in place and mark holes. (Two people
will make installation much easier. One to hold section up to deck and the other to mark
holes. On newer model units holes are pre-punched from the factory)
Using 25/64-drill bit, drill marked holes.
Install section and tighten. (Fig. 1) (Rotate blades by hand to make sure they do not hit
mulch kit baffle – adjust baffle if necessary).
Fig. 1
1) Position two blade section and mark holes.
2) Follow directions 6 and 7. (Fig. 2)
Fig. 2
3) Lower unit and test.
Wright Mulch Kits
DECK SIZE
Reg. 5" deck
ALL MODELS
48
Curved baffle style
95430003
52
Curved baffle style
95440003
61
Curved baffle style
95450003
** Block-Off kit only for discharge chute is part number 93460031 and applies to all models w/ 5" decks.
ZK- 6" deep deck-only
52
Curved baffle style
95440008
61
Curved baffle style
95450007
** Block-Off kit only for discharge chute is part number 95460013 and applies to all models w/ 6" decks.
Revision Table
Name
Ed Wright
Chris Sturtz
Date
N/A
2/26/15
Reason for Changes
Initial Release
Format Update
Version
00
01
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising