CADET PRO COMPACT RIGHT HEIGHT ELONGATED TOILET 14" ROUGH-IN

CADET PRO COMPACT RIGHT HEIGHT ELONGATED TOILET 14" ROUGH-IN
CADET® PRO™ COMPACT RIGHT HEIGHT®
ELONGATED TOILET 14" ROUGH-IN
VITREOUS CHINA
BARRIER FREE
CADET® PRO™ COMPACT RIGHT HEIGHT®
ELONGATED TOILET 14" ROUGH-IN
❑ 3517F.101 Compact Right Height ® Elongated Bowl
❑ 4188A.104 Tank
1-1/16" (27mm)
❑ 215FC.104
•Features the Cadet ® Flushing System
•Vitreous china
• Space saving elongated bowl fits in space of a round front
•High Efficiency Toilet (HET), ultra-low consumption (4.8 Lpf/1.28 gpf), utilizes 20%
less water
• Meets EPA WaterSense ® criteria
• Trade exclusive tank
• PowerWash® rim scrubs bowl with each flush
• Metal trip lever
• Robust metal trip lever & metal shank fill valve
• Includes EZ-Install Tools w/color match bowl caps
• EverClean® surface included
•3" flush valve
•Fully-glazed 2-1/8" trapway
• 16-1/2" rim height for accessible applications
• 14" (356mm) rough-in
•Generous 9" x 8" water surface area
• Chrome finish trip lever is supplied
• 1,000g MaP Score** at 1.28 gpf
• 5 year warranty
FINISHED WALL
30-1/8"
(767mm)
17-3/8"
(441mm)
8-7/8"
(226mm)
18-1/2"
(470mm)
Nominal Dimensions:
767 x 441 x 771mm (30-1/8" x 17-3/8" x 30-3/8")
C/L OF SEAT POST HOLES
140mm (5-1/2" CENTERS)
30-3/8"
(771mm)
3-5/8" (92mm)
Fixture only, seat and supply sold separately
Alternative Tank Configurations Available:
❑ 4188A.154 Tank complete with Aquaguard Liner
❑ 4188A.164 Tank complete with tank cover
locking device
❑ 4188A.174 Tank complete with Aquaguard Liner
and tank cover locking device
❑ 4188A.105 Tank complete with trip lever located on right side
❑ 4188A.165 Tank complete with tank cover locking device and trip lever located on right side
Compliance Certifications Meets or Exceeds the Following Specifications:
• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous
China Fixtures
• US EPA WaterSense ® Specification for HETs
16-1/2"
(419mm)
9-1/4"
(236mm)
14"
(352mm)
11-13/16"
(300mm)
C/L OF OUTLET
FINISHED
FLOOR
SUPPLY
AS
REQ'D
14"
(356mm)
*10"
(254mm)
6"
(152mm)
9-5/8"
(244mm)
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
356MM (14") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
** Maximum Performance (MaP) testing performed by
IAPMO R&T Lab. MaP Report conducted by Veritec
Consulting, Inc. and Koeller and Company.
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Seat: #5321.110 EverClean ® Elongated Seat with
Slow Close Snap-Off Hinges
❏ Supply with stop:
Certified by
IAPMO R&T
© 2013 AS America Inc.
K173
Rev. 5/13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising