50281 3 ifs vr1000 series ds fin

50281 3 ifs vr1000 series ds fin
IFS® Line / Fiber Transmission
cription
Specifications
VR1000 Series
Video
Video Output:
Bandwidth:
Differential
Gain: Receiver
IFS
AM Video
Differential Phase:
Tilt:
Signal-to-Noise Ratio (SNR):
1 volt pk-pk (75 ohms)
5 Hz - 10 MHz
<5%
<5°
<1%
60 dB typical, 54 dB minimum
Wavelength
850 nm, Multimode
Receiver Sensitivity
1 µw (-30 dBm)
Transmitter Output
25 µw (-16 dBm)
OVERVIEW
Number Of Fibers
STANDARD FEATURES
1
The IFS VR1000 Series video receiver detects an AM video signal on
• AM Video
Connectors
• NTSC, PAL, SECAM Compatible
one multimode optical fiber. The VR1000 utilizes man-ual gain control.
Optical:
ST
• Full Color Compatibility
The receiver is compatible with the IFS VT1101M, VT1101M-AC,
Power:
Terminal Block with Screw Clamps
• Utilizes Manual Gain
and VT1001 series transmitters. Plug-and-play design ensures ease
Video:
BNC (Gold Plated Center-Pin)
• Plug-and-play Design for Ease of Installation
of installation. The receiver incorporates a power status indicating
• Power Status Indicating LED to Monitor System Performance
LED for monitoring proper system operation. The module is
Electrical & Mechanical
available
in
a
stand-alone
version
only.
Power:
10-12 VDC @ 150 mA • Automatic Resettable Fuses on all Power Lines
• Comprehensive
Lifetime
Warranty
Current Protection:
Automatic Resettable Solid-State
Current
Limiters
Circuit Board:
Size (in./cm.) (LxWxH)
APPLICATION
Surface Mount: EXAMPLES
Shipping Weight:
• CCTV (Fixed Video)
Environmental
MTBF:
Operating Temp:
Storage Temp:
Relative Humidity:
Meets IPC Standard
4.2 x 3.5 x 1.0 in., 10.7 x 8.9 x 2.5 cm
< 2 lbs./0.9 kg
> 100,000 hours
-40° C to +74° C
-40° C to +85° C
0% to 95% (non-condensing)†
†May be extended to condensation conditions by adding suffix ‘–C’ to model number for conformal coating.
SYSTEM DESIGN
System Design
up to 2.5 miles
(4 km)
VT1101M
ifs
Video
(Coax)
1 Fiber
62.5/125µm MM
VR1000
ifs
International
Fiber
Video
Systems
Incorporated
203.426.1180
(Coax)
interlogix.com
Fibers Required
Optical Pwr. Budget
Max. Distance*
VR1000 Series
North America
T 855-286-8889
Latin America
T 561-998-6114
IFS AM Video Receiver
Ordering Information
Multimode 62.5/125µm**
Part Number
Description
Fibers Required
Optical Pwr. Budget
Max. Distance*
VR1000
Video Receiver (850 nm)
1
14 dB
2.5 miles (4 km)
VR1000 is compatible
with: VT1101M, VT1101AC, AND VT1001Series
Transmitters
Accessories ♦
PS12VDC1.5A-U
12VDC, 1.5A Plug-in Power supply (110/220VAC) with Universal power plug adapter kit (Included)
*Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels.
Distance can also be limited by fiber bandwidth. **For 50/125 Fiber, subtract 4 dB from Optical Power Budget.
♦ All accessories are third party manufactured.
GE
Security
Specifications
Video
Video Output:
1 volt pk-pk (75 ohms)
Bandwidth:
5 Hz - 10 MHz
Differential Gain:
<5%
Differential Phase:
<5°
Tilt:
<1%
Signal-to-Noise Ratio (SNR):
60 dB typical, 54 dB minimum
Wavelength
850 nm, Multimode
North America
T 888-GE-SECURITY
888-437-3287
F 503-691-7566
E [email protected]
Asia
T 852-2907-8108
F 852-2142-5063
Australia and New Zealand
T 613-9239-1200
F 613-9239-1299
1 µw (-30 dBm)
Europe
T 44-113-238-1668
F 44-113-253-8121
25 µw (-16 dBm)
Latin America
T 305-593-4301
F 305-593-4300
Receiver Sensitivity
Transmitter Output
Number Of Fibers
1
Connectors
Optical:
ST
Power:
Terminal Block with Screw Clamps
Video:
BNC (Gold Plated Center-Pin)
gesecurity.com/ifs
Specifications subject to
change without notice
Agency Compliance
© 2008 General Electric Company
Complies
with
FDA Performance
All Rights
Reserved
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Electrical & Mechanical
Power:
10-12 VDC @ 150 mA
Current Protection:
Automatic Resettable Solid-State Current Limiters
Circuit Board:
Meets IPC Standard
Size (in./cm.) (LxWxH)
Surface Mount:
4.2 x 3.5 x 1.0 in., 10.7 x 8.9 x 2.5 cm
Shipping Weight:
< 2 lbs./0.9 kg
Environmental
MTBF:
> 100,000 hours
Operating Temp:
-40° C to +74° C
Storage Temp:
-40° C to +85° C
Relative Humidity:
0% to 95% (non-condensing)
Made in the USA
Complies with FDA Performance
Standard for Laser Products, Title 21,
Code of Federal Regulations, Subchapter J
Ordering Information
Part Number
D1010
interlogix.com
D1010WDMA✧
Multimode
D1010WDMB
62.5/125µm**
Specifications subject
to change without
notice.
D1020
© 2013 United Technologies Corporation
All rights
reserved.
D1030
Interlogix is part of UTC Building
& Industrial
Systems, ✧
Single Mode
D1030WDMA
a unit of United
Technologies Corporation.
9/125µm
D1030WDMB
De
RS
RS
RS
RS
RS
RS
RS
VR1000
Accessories♦
PS-12VDC 12 Volt DC Plu
PS-12VDC-230 12 Volt D
Options
Add ‘-R3’ to Model Num
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement