DIGITAL MULTI-FX FX600
DIGITAL MULTI-FX FX600
Thank you for showing your confidence in us by purchasing the BEHRINGER DIGITAL MULTI-FX FX600.
This ultimate digital multi-effects pedal delivers 24-bit high-resolution stereo effects including Flanger,
Chorus, Phaser, Delay, Tremolo and Pitch Shifter. Thanks to its extensive tone control plus additional multifunctional parameter adjustment you’ll have plenty of cool sounds at your disposal to handle every situation.
1. CONTROLS
Top view
The LEVEL control adjusts the output level.
and
The PAR 1 and 2 controls have different functions depending on the chosen effect.
);
)XQFWLRQ3$5FRQWURO
)XQFWLRQ3$5FRQWURO
Chorus
Flanger
Phaser
Delay
Tremolo
Pitch Shifter
Effects speed
Effects speed
Effects speed
Delay time
Effects speed
Detune (slight shifting for fatter sound)
Effects depth
Effects depth
Effects depth
Delay feedback
Shape (LFO waveform)
Semi tone (pitch interval)
The FX control lets you chose between six different modulation effects:
CHORUS: This effect slightly detunes the original signal. A very pleasant detune effect is created
in connection with the pitch variation.
FLANGER: Originally, the flanger effect was generated with two tape recorders running synchronously.
The same audio signal was recorded on both machines. If you put a finger on the left spool of one of
the machines, the spool and the playback speed are slowed down. The generated delay results in
phase shifting of the signals.
PHASER: With the phaser, a second, phase-shifted signal is added to the original audio signal. The
resulting sound is thicker and above all livelier.
PITCH SHIFTER: The pitch shifter slightly detunes the audio signal.
TREMOLO: The tremolo effect is achieved by periodic modulation of the input signal level. This
results in a continuous change from low to high level that lends a quivering, tremulous sound character.
DELAY: A delay of the input signal with various repetitions.
The ON/BATT LED illuminates when the effect is activated. It also serves as a battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use the two 1/4" TS connectors IN A and IN B to plug in a stereo input signal. For mono use
just plug in IN A.
The two 1/4" TS connectors OUT A and OUT B send the signal to your amp. Use both connectors
if you want to achieve full stereo effect. For mono use just plug in OUT A.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V
battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
+
DIGITAL MULTI-FX FX600
The FX600 has no on/off switch. As soon as you insert the jack into the IN connector, the
FX600 begins running. When not using the FX600, remove the jack from the IN connector.
This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
2. WARRANTY
For our current warranty terms, please refer to our website at http://www.behringer.com.
In A
In B
Out A
Out B
3. SPECIFICATIONS
Connector
Impedance
Impedance mono
1/4" TS
500 kW
250 kW
Connector
Impedance
1/4" TS
500 kW
Connector
Impedance
1/4" TS
1 kW
Connector
Impedance
Power supply
Power connector
Battery
Power consumption
Dimensions (H x W x D)
Weight
1/4" TS
1 kW
9V
, 100 mA regulated
BEHRINGER PSU-SB
USA/Canada
120 V~, 60 Hz
China/Korea
220 V~, 50 Hz
U.K./Australia
240 V~, 50 Hz
Europe
230 V~, 50 Hz
Japan
100 V~, 50 - 60 Hz
2 mm DC jack, negative center
9 V type 6LR61
90 mA
approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5")
approx. 0.33 kg (0.73 lbs)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made
from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
4. SAFETY INSTRUCTIONS
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself.
Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
No utilizar cerca de agua o instalar cerca de fuentes de calor. Utilice sólo accesorios y aditamentos autorizados. No intenté reparar
el producto usted mismo. Contacte a nuestro personal técnico cualificado para servicio y reparaciones, especialmente cuando la
fuente o el cable de alimentación estén dañados.
Íå ýêñïëóàòèðóéòå ïðèáîð âáëèçè îò èñòî÷íèêîâ âîäû è òåïëà. Ïðèìåíÿéòå òîëüêî àâòîðèçîâàííûå äîïîëíèòåëüíûå
óñòðîéñòâà. Íèêîãäà íå ðåìîíòèðóéòå ïðèáîð ñàìîñòîÿòåëüíî. Ðåìîíò ìîæåò ïðîèçâîäèòü òîëüêî êâàëèôèöèðîâàííûé
ñïåöèàëèçèðîâàííûé ïåðñîíàë, îñîáåííî ïðè ïîâðåæäåíèÿõ ñåòåâîãî ïðîâîäà èëè ñåòåâîé âèëêè.
Die deutsche Anleitung ist erhältlich @ www.behringer.com
Manuel francophone en téléchargement sur www.behringer.com
Manual en español disponible en www.behringer.com
Manuali italiani disponibili @ www.behringer.com
Ðóññêîÿçû÷íîå ðóêîâîäñòâî @ www.behringer.com
Polska instrukcja dostêpna jest pod adresem @ www.behringer.com
Nederlandse handleiding beschikbaar @ www.behringer.com
Suomenkielinen käyttöohje saatavilla osoitteesta www.behringer.com
Svensk manual finns tillgänglig på www.behringer.com
Dansk vejledning findes på @ www.behringer.com
Manual português disponível @ www.behringer.com
Åëëçíéêü åã÷åéñßäéï õðÜñ÷åé äéáèÝóéìï óôç äéåýèõíóç www.behringer.com
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time
of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered
trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER nor affiliation of the
trademark owners with BEHRINGER. BEHRINGER accepts no liability for any loss which may be suffered by any person who relies
either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may vary slightly
from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of BEHRINGER and have
absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be
reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind,
for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered
trademark. ALL RIGHTS RESERVED. © 2006 BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877
Willich-Münchheide II, Germany. Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE
INFORMATION
DIGITAL MULTI-FX FX600
Responsible party name:
MUSIC Group Services USA, Inc.
Address:
18912 North Creek Parkway,
Suite 200 Bothell, WA 98011,
USA
Phone/Fax No.:
Phone: +1 425 672 0816
Fax: +1 425 673 7647
DIGITAL MULTI-FX FX600
complies with the FCC rules as mentioned in the following paragraph:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Important information:
Changes or modifications to the equipment not expressly approved by MUSIC Group
can void the user’s authority to use the equipment.
behringer.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising