Roland | FR-8x | Owner's Manual | Engelsk beskrivelse

Engelsk beskrivelse
FR-8x Version 2.01 Changes & Improvements
This leaflet describes the enhancements made to the Roland
FR-8x with Version 2.01 of its software. This leaflet is intended as a
companion to the FR-8x Owner’s Manual.
Added Parameters and Values
13.5 Chin Function
Now you can assign the following functions to the chin switches.
Parameter
Chin 1–3
Value
Accordion Button,
Organ Button,
Orch 2 Button,
Orch 1 Button,
Bass&Chord Btn,
F.Bass Btn,
OrchCh/FBas Btn,
Orch Bass Btn
Explanation
Now you can assign the following functions to the function
switches.
Switch 1–6
Value
Accordion Button,
Organ Button,
Orch 2 Button,
Orch 1 Button,
Bass&Chord Btn,
F.Bass Btn,
OrchCh/FBas Btn,
Orch Bass Btn
Explanation
Assign the same operation as when
the corresponding button on the
main unit is pressed.
Now you can assign the following functions to the MIDI foot
controllers.
Switch 1–15
Value
Accordion Button,
Organ Button,
Orch 2 Button,
Orch 1 Button,
Bass&Chord Btn,
F.Bass Btn,
OrchCh/FBas Btn,
Orch Bass Btn
Parameter
Value
Explanation
VOLUME
Off,
-40–Std–+40
An offset value for the organ sound relative
to the volume.
Display Hints When Entering Characters
Hints for character entry are now displayed when entering
characters, such as when you’re assigning a name to a user
program.
Parameter
[UP][DOWN] buttons
SET [C] button
SET [A] button
Right hand registers [1] button
Right hand registers [2] button
Right hand registers [3] button
Right hand registers [4] button
Explanation
Switch the keyboard mapping.
Deletes a character to the left of the cursor.
Deletes a character under the cursor.
Inserts a character (Insert).
Replaces a character (Replace).
Moves the cursor left.
Moves the cursor right.
Jump to a User Program
When the user program list is displayed, you can now easily jump to
a user program.
14.8 MIDI Foot Controller
Parameter
The following values have been added.
Assign the same operation as when
the corresponding button on the
main unit is pressed.
14.5 Function Switch
Parameter
7.1 Organ Selection
1. Select the user program list.
2. Hold down the SET [C] or SET [A] button until the “JUMP
TO USER PROGRAM” popup window appears.
Explanation
3. Press a right-hand register button to select a user
Assign the same operation as when
the corresponding button on the
main unit is pressed.
program.
9.2 Tone Control
The following values have been added.
Parameter
Value
Explanation
Cycle 4
Cycle 6
VOICING
Cycle 5
Cycle 7
Cycle 8
Cycle 4–10
Cycle 9
Cycle 10
*
Copyright © 2015 ROLAND CORPORATION
5
1
0
0
0
4
7
2
7
0
-
0
1
*
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising