MERIT SERIES B-VENT FIREPLACES Our name is our promise. BCT2536

MERIT SERIES B-VENT FIREPLACES Our name is our promise. BCT2536
BCT2536
MERIT SERIES B-VENT FIREPLACES
Our name is our promise.
TRADITIONAL
The BCT2536 offers excellent value without compromising on quality or design. This b-vent louvered
design offers an array of standard features that include a dual tube burner, detailed ceramic fiber logs
and fixed glass doors to provide continuous ambiance without additional heat to the room.
Available in 32” circulating rolled louvered model
Uses 4” b-vent
Millivolt (Remote-ready) or electronic ignition
Yellow flames with ember bed
Standard fixed tempered glass
Detailed ceramic fiber “split oak” log set with log grate
Black painted interior
Includes mesh fire screens
Durable textured powder coat finish
Optional outside air kit for increased performance
Optional blower and remote controls available for all models
20 year limited warranty
INTERIOR
Black (painted)
FEATURES
OPTIONAL ACCESSORIES
APPLIANCE SPECIFICATIONS
Uses 4" b-vent
chimney pipe
14 3/4" (37.5 cm)
to Nailing Flanges
7 7/8" (20 cm) to
Center of 4" B-Vent
1 1/4"
(3.2 cm)
37" (94 cm)
1
to Nailing Flange 36 /4" (92.1 cm)
Face Dimensions
Fixed Glass Doors (standard)
Wall Switch
Wireway
6" (15.2 cm)
Wall Switch
Wireway
6" (15.2 cm)
5/8"
(16 mm)
36" (91.4 cm)
Face Dimensions
2 /2" (6.4 cm)
1 1/2" (3.8 cm)
36 3/4" (93.4 cm)
1 1/4"
(3.2 cm)
36" (91.4 cm)
Face Dimensions
2"
(5.1 cm)
36 1/4" (92.1 cm)
Face Dimensions
8" (20.3 cm)
Gas Supply
Inlet
5/8"
(16 mm)
2 /2" (6.4 cm)
2"
(5.1 cm)
38"
(96.5 cm)
1 1/2" (3.8 cm)
8" (20.3 cm)
Gas Supply
Inlet
38"
(96.5 cm)
36 1/4" (92.1 cm)
to Nailing Flange
36 1/4" (92.1 cm)
to Nailing Flange
Wall Switch
Wireway
4 1/2" (11.4 cm) Electrical Inlet
35 3/4"
Wall (90.8
Switch
cm)
Wireway
36 3/4" (93.4 cm)
35 3/4"
90.8 cm)
4 1/2" (11.4 cm) Electrical Inlet
5 7/8"
(15 cm) to
Nailing
Flange
1
5 7/8"
(15 cm) to
Nailing
Flange
1
7 /8" (20 cm) to
Center of 4" B-Vent
14 3/4" (37.5 cm)
to Nailing Flanges
7
11 1/8"
(28.3 cm)
Air Kit Location
15 3/8"
(39 cm)
37" (94 cm)
to Nailing Flange
11 1/8"
(28.3 cm)
Black
Air Kit
Location
15 3/8"
(39 cm)
ADDITIONAL ACCESSORIES
A. Remote Controls
FRAMING SPECIFICATIONS
B. Blower
14 3/4"
(37.5 cm)
21" (53.3 cm)
To Center of
Top Vent
28 5/8"
(72.7 cm)
**
14 3/4" (37.5 cm)
to Nailing
Flanges
56 3/4"
(144 cm)
12 1/4"
(31 cm)
to Opening
B.
Outside Air Kit
C.
Perimeter Trim Kits
FIREPLACE BTU OPERATING INPUT
MODEL
FUEL
BTU/HR
BCT2536
NG
18,000
BCT2536
LP
18,000
** These dimensions allow for 1"clearance at sides and back of fireplace.
However, 0"clearance is also permitted at all sides when framed.
IMPORTANT NOTES:
As with any fireplace, this appliance is extremely hot during operation. Read and understand all operating
instructions before using this appliance. For further information, consult your dealer.
Local conditions, such as elevation, wind, vent configuration and choice of fuel will affect overall appearance
of the fire and heating performance. Performance can also vary with home design and insulation, climate,
condition and type of fuel used, appliance location, burn rate, accessories chosen, chimney installation and
how the appliance is operated.
Diagrams, illustrations and photographs are not to scale—consult installation instructions. Product designs,
materials, dimensions, specifications, colors and prices are subject to change or discontinuance without
notice.
14 3/4" (37.5 cm)
to Nailing Flanges
38"
(96.5 cm)
2"
(5.1 cm)
1 1/4"
(3.2 cm)
5/8"
(16 mm)
Visit us online
785379M 07/14
" (91.4 cm)
e Dimensions
© 2014 Innovative Hearth Products
SuperiorFireplaces.us.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising