CPC512 datash
CPC512
3U CompactPCI CPU board
Features
CPU: Intel IvyBridge (2/4 Cores)
RAM: DDR3 SDRAM 1333, 1600 MHz or DDR3L SDRAM 1066,
1333 MHz with ECC up to 8GB soldered, 2-channel
FRAM: 32x KB, 1 KB of which represent a closed area for
storing Bios Setup settings; implemented on SPI FPGA bus
FLASH BIOS: 2 х 32 Mbit SPI-Flash
Power supply: Supply voltage: +12V, +5V_STBY (optional)
Operating temperature range: –40…+85°С (according to IEC 60068-2-14)
Single/Multiple shock resistance:
100g (according to IEC 60068-2-27) /50g (IEC 60068-2-29)
Supported OS: Windows 7 Embedded, Linux 2.6, QNX 6.5.0
Technical Specifications
Overview
CPU
CPC512 CPU module is a highly integrat-
RAM
ed 3U CPCI Serial solution for the use in
• DDR3 SDRAM 1333, 1600 MHz or DDR3L SDRAM 1066, 1333
MHz with ECC up to 8GB, soldered, 2x channel
real-time, automation control, high-speed
data acquisition and processing systems.
The board is based on the Intel Ivy Bridge
CPU (2- or 4-core CPUs) which has one of
• Intel Core I7 IvyBridge CPU (2/4 Cores)
Video output
(simultaneous output to 2 displays)
• 2×DisplayPort connectors (resolution up to
2560×1600@60Hz), routed to the front panel
LPC bus
the highest performance level in its class.
• Routed to mezzanine connector
Reliable operation of CPC512 enables its
PCI-E bus
use in mission critical applications.
• CPU hosts. Support of PCI-E 3.0 (up to 8GT/s)
• Routed via PCI-E switch Gen 3.0 to J1 and J2 CPCI Serial
connectors with support of 2-x devices x8
• Support of Non-Transparent operation mode
for FatPipe#1 x8 ports
• Support of DMA mode for x8 ports;
• Routed to J4 CPCI Serial connector with support of 2-х
devices х4
• PCH hosts. Support of PCI-E 2.0 (up to 5GT/s)
• Routed to J4 CPCI Serial connector with support of 4-х
devices х1
2×USB2.0 ports, routed to the front panel connectors
2×USB2.0 ports, routed to the mezzanine connector
4×USB2.0 ports, routed to J3 CPCI Serial connector
1×USB2.0 port, used for implementation of MicroSD interface
4×USB3.0 ports, routed to J1 and J2 CPCI Serial connectors
FRAM
• 32 KB, 1 KB of which –
is a closed area for storing Bios Setup settings
• Implemented on SPI FPGA bus
Real-time clock
• Power supply from CR2032 (rated at: 3.0 V) lithium battery
Audio support
• HD Audio interface, routed to mezzanine connector
Watchdog
• Internal, suitable for program control
SGPIO interface
• Support of LED indication in accordance with the SFF-8485
specification
Hardware monitor
•
•
•
•
Implemented via SMBUS interface
Monitoring of 3х supply voltages
Monitoring of CPU temperature
Monitoring of PCB temperature
SMBUS
LED-indication:
• Compatibility with Specification 2.0
• Speed up to 100 kbps
•
•
•
•
•
FLASH BIOS
• 2×32 Mbit SPI-Flash;
MicroSD
• Support of SDHC 2.0 specification
• Connection to USB 2.0 interface
SATA III interface
• 1x interface, constantly routed to mezzanine connector
• 1x interface, - switchable between J1 CPCI Serial connector
and mezzanine connector
SATA II interface
• 4x interfaces, routed to J3 CPCI Serial connector
2x ports LAN 10/100/1000 Mb
on PCI-E x4 Gen2
• 2x ports, routed to the front panel connectors
• Server network adapter
1x port LAN 10/100/1000 Mb,
with AMT support
• Routed to J6 CPCI Serial connector
USB ports
• 13×USB 1.1 (12Mb/sec), USB 2.0 (480Mb/sec)
ports and 4×USB 3.0 (4.8Gb/sec) ports
http://www.fastwel.com
•
•
•
•
•
LED of the board start diagnostics / HOT swap LED
LED of addressing to SATA drives
LED of the module’s temperature mode
LED of NT status of port of the PCI Express interface
2x software-controlled LEDs (user LEDs)
OS compatibility
• Windows 7 Embedded
• Linux 2.6
• QNX 6.5.0
Power supply requirements
Supplying voltage: +12V, +5V_STBY (optional)
Operating temperature range
• –40…+85°С (according to IEC 60068-2-14)
CPC512
3U CompactPCI CPU board
Operating Conditions
Type of effect
Name of the parameter
Parameter value
Low temperature
–40°С (0*)(0**)
High temperature***
+85°С (+70*)(+45**)
Humidity
Relative humidity
Up to 80%, non-condensing
IEC 68-2-14-84
Damp heat (+55°C)(for lacquerware)
Relative humidity
Up to 93%
IEC 68-2-30-82
Frequency range (Hz)
10…500
Acceleration, g
5
Peak acceleration, g
100
Change of temperatures
Sinusoidal vibration
Single shocks
IEC 60068-2-14
IEC 60068-2-6
Peak acceleration, g
50
Number of shocks
1000
Multiple shocks
IEC 60068-2-27
IEC 60068-2-29
*For commercial temperature range.
**For reduced commercial temperature range.
***In order to avoid overheating, when the upper limit of the temperature range has been reached,
CPU will automatically reduce its frequency down to 200 MHz to decrease heat dissipation.
Extension Capabilities
Number of interfaces routed from the board may be increased due to the connection of MIC584 module.
MIC584 contain the following set of interfaces:
• 2×USB 2.0
• 2×SATA
• Audio IN/OUT/MIC
• 4×RS-232
• 2×RS-485
• LPT
• PS/2 keyboard+mouse
http://www.fastwel.com
Document
CPC512
3U CompactPCI CPU board
Board Layout
http://www.fastwel.com
CPC512
3U CompactPCI CPU board
Ordering Information
CPC512 Configuration
CPC512 01 - i72C1.7 - RAM4096 - R1 - C \ Options
Versions
CPС512-01-i72C1.7-RAM4096-R1-C
CPС512-01-i72C1.7-RAM4096-R2-I
CPС512-01-i74C2.1-RAM8192-R2-C
CPС512-01-i74C2.1-RAM8192-R1-O
CPС512-01-i72C1.7-RAM4096-RC
CPС512-01-i74C2.1-RAM8192-RC
CPCI Serial 3U module, height: 4HP, in the regular 3U Eurocard standard, CPU: 1.7 GHz, 17 W,
RAM: 4GB, with a low heat-sink designed for operation in the commercial temperature range
CPCI Serial 3U module, height: 8HP, in the regular 3U Eurocard standard, CPU: 2 core 1.7 GHz
17 W, RAM: 4GB, with a high heat-sink designed for operation in the industrial temperature range
CPCI Serial 3U module, height: 8HP, in the regular 3U Eurocard standard, CPU: 4 cores 2.1 GHz
35 W, RAM: 8GB, with a high heat-sink designed for operation in the commercial temperature range
CPCI Serial 3U module, height: 4HP, in the regular 3U Eurocard standard, CPU: 4 cores 2.1 GHz
35 W, RAM: 8GB, with a low heat-sink designed for operation in the reduced commercial
temperature range
CPCI Serial 3U module, height: 8HP, in the regular 3U Eurocard standard, CPU: 2 cores 1.7 GHz
17 W, RAM: 4GB, conduction cooling implementation
CPCI Serial 3U module, height: 4HP, in the regular 3U Eurocard standard, CPU: 4 cores 2.1 GHz
35 W, RAM: 8GB, conduction cooling implementation
Options
\Coated
\OEM
\LNX
\Win7e
Conformal coating
with a limited package contents
Linux 2.6
Windows 7 Embedded
Delivery checklist
CPC512 delivery checklist contains:
1. CPC512 CPU Module
2. Package
Ver.1.01.2015
Corporate Offices
Product specifications are subject to change without notice
ISO 9001:2008
EC.C.O.02.01.00082312
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising