WaveSurfer MXs-B and MSO MXs-B Oscilloscopes Engineered for Efficient

WaveSurfer MXs-B and MSO MXs-B Oscilloscopes Engineered for Efficient
WaveSurfer® MXs-B and
MSO MXs-B Oscilloscopes
200 MHz – 1 GHz
Engineered for Efficient
Design and Debug
ESSENTIAL TOOLS FOR VALIDATION AND DEBUG
WaveSurfer® MXs-B
• 200 MHz, 400 MHz, 600 MHz
and 1 GHz Bandwidths
• Up to 10 GS/s Sample Rate
• 12.5 Mpts/Ch Memory,
25 Mpts Interleaved
• Fast Processing of Long
Memory and Math
The WaveSurfer® MXs-B and MSO MXs-B oscilloscopes pack
high performance hardware, powerful waveform processing
and advanced math, measurement and debug tools into a
compact form factor with a large touch screen display and
intuitive user interface.
• Responsive User Interface
With up to 10 GS/s sample rate and 25 Mpts of memory WaveSurfer can
• WaveStream™ Fast
capture large amounts of data at very high sample rates. Other oscilloscopes
Viewing Mode
• WaveScan™ – Advanced
Search and Find
• LabNotebook Documentation
and Report Generation
offer long memory but they bog down trying to process or display it. WaveSurfer
handles large amounts of data quickly providing fast processing of long memory
even when using math and measurement functions. The software responds
immediately to the user inputs even while processing data.
System debug often requires more than analog channels the MSO MXs-B
• 10.4" Touch Screen Display
delivers 18 digital channels which can capture digital signals of up to 250 MHz.
• LXI Compliant
The MSO MXs-B offer analog
and digital cross-triggering
plus measurement tools to
MSO MXs-B
help debug digital busses.
All the great features of the
WaveSurfer MXs-B plus:
LeCroy’s WaveScan™ search
• 18 Digital Channels
• Max. Digital Signal Speed
of 250 MHz
and find tool will scan both
analog and digital channels
for anamolies plus
scan multiple digital
lines for a parallel
• Analog and Digital Cross
Pattern Triggering
2
bus pattern.
WaveScan Advanced Search
Advanced Math and Measure
WaveScan allows searching in a
With 18 math functions including
WaveStream Fast
Viewing Mode
single acquisition using more than
averaging, enhanced rsolution and
WaveStream provides a vibrant,
20 different criteria. Or, set up a
FFT plus 23 measurement parameters
intensity graded (256 levels) display
Scan condition and scan for an
WaveSurfer can measure and
with a fast update to closely simulate
event over hours or even days.
analyze every aspect of a waveform.
the look and feel of an analog
When using an MSO model
Beyond just measuring waveforms,
oscilloscope. Turn WaveStream ON
WaveScan will search digital lines
WaveSurfer provides statistics and
or OFF, and adjust intensity, using
for parallel bus patterns.
histicons to show how waveforms
the front panel knob. Use it only
change over time.
when you want to.
Keep your testing efficient with a
Embedded Controller
Design and Debug
LabNotebook Documentation
and Report Generation Tool
thoughtfully designed user interface
Save time when working with
LabNotebook provides a report
that provides the busy engineer with
embedded controllers by adding
generation tool to save and
a GUI that is smooth, transparent, and
high-performance mixed signal
document all your work. Saving
easy to use. Use the touch screen
capability to the with the MSO MXs-B.
all displayed waveforms, settings,
to quickly access all triggers, math
Capture digital signals up to 250 MHz
and screen images is all done
functions and measurement parameters
with up to 10 Mpts/Ch memory,
through LabNotebook, eliminating
or to “draw a box” around the area
1 GS/s and 18 channels. Quickly and
the need to navigate multiple menus
of interest and zoom all channels to
easily isolate specific serial data
to save all these files independently.
Touch Screen Simplicity
the desired area.
events with optional
I2C,
SPI, UART,
RS-232, USB, Audio
(I2S,
LJ, RJ,
TDM), MIL-STD-1553, ARINC 429,
MIPI D-PHY, DigRF, CAN, LIN and
FlexRay™ trigger and decode options.
3
INTUITIVE USER INTERFACE TO FIND PROBLEMS FASTER
2
3
The WaveSurfer MXs-B and MSO
MXs-B oscilloscopes makes everyday
testing simpler and easier. The intuitive
user interface and streamlined front
panel make it easy to turn on the
oscilloscope and start making measurements. The interface is designed so that
all the common measurements and
functions are just one touch away.
1. Only 15 cm (6") Deep
The most space-efficient oscilloscope for your
bench from 200 MHz to 1 GHz.
2. Local Language User Interface
Select from 10 language preferences. Add a front
panel overlay with your local language.
3. Bright 10.4" Display
You’ll never use a small display oscilloscope again.
A fantastic viewing angle makes it easy to view.
1
4
6
4. “Push” Knobs
Trigger level, delay, and offset knobs all provide
shortcuts to common actions when pushed.
4
5. Zoom Control Knobs
Navigate zoom or math traces with the
multiplexed horizontal knobs.
6. LeCroy WaveStream Fast Viewing Mode
5
Provides a lively, analog-like feel similar to a phosphor
trace. Adjust “trace” intensity with the front panel
7
control, or toggle between LeCroy WaveStream and
real-time modes.
7. Dedicated Cursor Knobs
Select type of cursor, position them on your
signal, and read values without ever opening
a menu.
8. Touch Screen with Built-in Stylus
The most time-efficient user interface is even
8
easier to use with a built-in stylus.
Document and Share:
• Quickly save all files with LabNotebook
• Create custom reports with LabNotebook
• Save to internal hard drive or network drive
• Print to a USB printer
• Save to USB memory stick
• Connect with LAN or GPIB
• View data on a PC with free WaveStudio utility
5
IDENTIFY AND ISOLATE PROBLEMS FASTER
Advanced Waveform Capture
with Sequence Mode
Use Sequence mode to store up to
10,000 triggered events as "segments"
into memory. This can be ideal when
capturing many fast pulses in quick
succession or when capturing events
separated by long time periods.
Sequence mode provides timestamps
for each acquisition and minimizes
dead-time between triggers to less
than 800 ns. Combine Sequence mode
with advanced triggers to isolate rare
events over time and analyze afterwards.
WaveStream Fast
Viewing Mode
WaveStream provides a vibrant,
WaveScan Advanced Search
WaveScan provides powerful isolation capabilities that hardware triggers can’t provide. WaveScan provides the ability
to locate unusual events in a single capture (i.e., capture and
search), or “scan” for an event in many acquisitions over a
long period of time. Select from more than 20 search modes
to find events on any analog or digital channel or search for
a pattern across multiple digital channels.
Since the scanning “modes” are not
hours or days, enabling faster debug-
simply copies of the hardware triggers,
ging. When used in multiple acquisi-
the utility and capability is much higher.
tions, WaveScan builds on the
For instance, there is no “frequency”
traditional LeCroy strength of fast
trigger in any oscilloscope, yet
processing of data. A LeCroy X-Stream
WaveScan allows for “frequency”
oscilloscope will quickly scan millions of
to be quickly “scanned.” This allows
events looking for unusual occurrences,
the user to accumulate a data set of
and do it much faster and more effi-
unusual events that are separated by
ciently than other oscilloscopes can.
6
intensity graded (256 levels) display
with fast update rate to simulate the
look and feel of an analog oscilloscope.
WaveStream is helpful for seeing
jitter or identifying unusual events.
With sampling rate as high as 10 GS/s
WaveStream is an excellent runt
or glitch finder.
EMBEDDED SYSTEM DESIGN AND DEBUG
High-performance MSO
The MSO MXs-B models provide
an easy way to capture and display
analog and digital signals side by side.
With the ability to capture 250 MHz
signals at 1 GS/s sample rate on
18 lines simultaneously the MSO
MXs-B delivers performance that
other MSOs cannot. Memory and
sample rate are never shared with
analog channels and special modes
are required to get full performance.
The MSO MXs-B deliver uncompromised performance in all situations.
Serial Data Trigger and
Decode
The serial data trigger will quickly
To further simplify the debug process
isolate events on a bus eliminating
all decoded data can be displayed in
Debugging serial data busses can be
the need to set manual triggers and
a table below the waveform grid.
confusing and time consuming. The
hoping to catch the right information.
Selecting an entry in the table with
serial data trigger and decode options
Trigger conditions can be entered
the touch screen will display just
for WaveSurfer MXs-B and MSO
in binary or hexadecimal formats
that event. Additionally, built-in
MXs-B provide time saving tools for
and conditional trigger capabilities
search functionally will find specific
serial bus debug and validation.
even allow triggering on a range of
decoded values.
different events.
Supported Serial Data
Protocols
Protocol decoding is shown directly
on the waveform with an intuitive,
color-coded overlay and presented
in binary, hex or ASCII. Decoding
on the WaveSurfer is fast even with
long memory and zooming in to the
waveform shows precise byte by
byte decoding.
• I2C, SPI, UART
• CAN, LIN, FlexRay™
• USB
• Audio (I2S, LJ, RJ, TDM)
• MIL-STD-1553, ARINC 429
• MIPI D-PHY, DigRF 3G, DigRF v4
7
LABNOTEBOOK™
A UNIQUE TOOL FOR DOCUMENTATION AND REPORT GENERATION
The LabNotebook feature of WaveSurfer MXs-B and MSO MXs-B provides a report generation
tool to save and document all your work. Saving all displayed waveforms, relevant settings,
and screen images is all done through LabNotebook, eliminating the need to navigate multiple
menus to save all these files independently.
or k
Your W
t
n
e
m
Docu
One-touch Functionality
Save You
r Work
Reca
ll Jo
bs
V/div
T/div
Memory Length
Sample Rate
Measurement
Math
HARD DRIVE
USB DRIVE
OSCILLOSCOPE SET UP
IL
EMA
FLASHBACK
FLASHBACK
FLASHBACK
WAVEFORM
PRIN
TER
LABNOTEBOOK
SCREEN DUMP
Easy report generation helps you
share your findings and communicate
important results.
The touch screen and stylus
allow for easy annotation
of the screen. LabNotebook
allows you to add freehand
text and graphics in multiple
colors along with printed
text and arrows to help identify
important parts of your
waveforms and measurements.
Annotated screen captures can
be included in custom reports.
8
LabNotebook adds a simple way to
report your work and save all essential
waveforms, settings, and screen images.
Quickly save all the
necessary files with
LabNotebook in a
single button press.
Recall your settings
from any report
by using the
Flashback capability.
BROAD RANGE OF PROBING SOLUTIONS
WaveSurfer MXs-B and MSO MXs-B support a broad range of probes for a variety of applications.
ZS Series High Impedance Active Probes
ZD Series Differential Probes
• 1 GHz (ZS1000) and 1.5 GHz
(ZS1500) bandwidths
• 200 MHz, 500 MHz, 1 GHz
• High Impedance (0.9 pF, 1 MΩ)
• Wide range of probing
accessories
• Extensive standard and
available probe tip and ground
connection accessories
and 1.5 GHz bandwidths
• LeCroy ProBus system
• ±12 Vdc offset (ZS1500)
• LeCroy ProBus system
High-Voltage Passive Probes
• Suitable for safe, accurate
high-voltage measurements
High-Voltage
Differential Probes
• 20 MHz and 100 MHz bandwidth
• 1.2 kV to 20 kV
• 1,000 Vrms common
mode voltage
• Works with any 1 MΩ
input oscilloscope
• 1,400 Vpeak differential
voltage
• EN 61010 CAT III
• 80 dB CMRR at 50/60 Hz
• LeCroy ProBus system
Current Probes
AP031
• Range of probes from 30 Arms (50 Apeak)
• Lowest priced differential probe
to 500 Arms (700 Apeak)
• 15 MHz bandwidth
• 2 MHz to 100 MHz bandwidths
• 700 V maximum input voltage
• Small form factor
accommodates large
conductors with
small jaw size
• Works with any 1 MΩ input
oscilloscope
• LeCroy ProBus system
9
SPECIFICATIONS
Analog Channels
– Vertical
WaveSurfer
24MXs-B
WaveSurfer
44MXs-B
MSO 44MXs-B
WaveSurfer
42MXs-B
WaveSurfer
64MXs-B
MSO 64MXs-B
Bandwidth (@ 50 Ω)
Rise Time
Input Channels
Vertical Resolution
Vertical Sensitivity (V/div)
Vertical (DC Gain)
Accuracy
BW Limit
Maximum Input Voltage
200 MHz
400 MHz
400 MHz
600 MHz
1.75 ns
875 ps
875 ps
500 ps
4
4
2
4
8 bits
2 mV/div–10 V/div (1 MΩ); 2 mV/div–1 V/div (50 Ω)
±1.0% of full scale (typical); ±1.5% of full scale ≥ 10 mV/div (warranted)
Input Coupling
Input Impedance
AC, DC, GND (DC and GND for 50 Ω)
20 MHz
WaveSurfer
62MXs-B
WaveSurfer
104MXs-B
MSO 104MXs-B
600 MHz
500 ps
2
1 GHz
300 ps
4
20 MHz, 200 MHz
50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC ≤ 5 kHz)
50 Ω: 5 Vrms
1 MΩ: 250 V max.
(DC + Peak AC
≤10 kHz)
1 MΩ || 16 pF, or 50 Ω
1 MΩ || 20 pF,
or 50 Ω
Analog Channels
– Acquisition
Sample Rate
(Single-shot)
Sample Rate
(Repetitive)
Record Length
Capture Time
Acquisition Modes
Time Base Range
Time Base Accuracy
2.5 GS/s
5 GS/s
5 GS/s
(10 GS/s Interleaved)
50 GS/s
12.5 Mpts/Ch (all channels), 25 Mpts (interleaved)
Up to 2.5 ms at full sample rate on all four channels
Real Time, Roll, RIS (Random Interleaved Sampling), WaveStream (Fast Viewing Mode), Sequence (Segmented Memory
up to 10,000 segments)
200 ps/div–1000 s/div (roll mode from 500 ms/div–1000 s/div)
≤ 5 ppm @ 25 °C (typical) (≤ 10 ppm @ 5–40 °C)
Digital Channels
– Vertical
Input Channels
Input Impedance
Maximum Input Voltage
Threshold Groupings
Threshold Selections
18 (D0–D17)
100 kΩ || 5.0 pF
±30 V non-destruct
D0–D8, D9–D17
TTL, ECL, CMOS,
PECL, LVDS,
User Defined
18 (D0–D17)
100 kΩ || 5.0 pF
±30 V non-destruct
D0–D8, D9–D17
TTL, ECL, CMOS,
PECL, LVDS,
User Defined
18 (D0–D17)
100 kΩ || 5.0 pF
±30 V non-destruct
D0–D8, D9–D17
TTL, ECL, CMOS,
PECL, LVDS,
User Defined
1 GS/s
10 Mpts/Ch
2 ns
1 GS/s
10 Mpts/Ch
2 ns
1 GS/s
10 Mpts/Ch
2 ns
250 MHz
250 MHz
250 MHz
Digital Channels
– Acquisition
Sample Rate
Record Length
Minimum Detectable
Pulse Width
Maximum Input
Frequency
10
SPECIFICATIONS
WaveSurfer
24MXs-B
Trigger System
Trigger Modes
Trigger Sources
Trigger Coupling
Pre-trigger Delay
Post-trigger Delay
Trigger Hold-off
Internal Trigger
Level Range
External Trigger Range
Trigger Modes
WaveSurfer
44MXs-B
MSO 44MXs-B
WaveSurfer
42MXs-B
WaveSurfer
64MXs-B
MSO 64MXs-B
WaveSurfer
62MXs-B
WaveSurfer
104MXs-B
MSO 104MXs-B
Normal, Auto, Single, and Stop
Any input channel, External, Ext/10, or line; slope and level unique to each source (except for line trigger)
DC, AC, HFRej, LFRej
0–100% of full scale
0–10,000 divisions
1 ns to 20 s or 1 to 1,000,000,000 events
±4.1 div from center
EXT/10 ±4V; EXT ±400 mV
Edge, Glitch, Width, Logic (Pattern), TV (NTSC, PAL, SECAM, HDTV–720p, 1080i, 1080p), Runt, Slew Rate, Interval
(signal or Pattern), Dropout, Qualified (State or Edge)
Probes
Standard Probes
Probing System
One PP009 (5 mm) per channel
One PP011 (5 mm)
per channel
BNC and LeCroy ProBus for Active voltage, current and differential probes
Measure, Zoom, and Math Tools
Measurement
Parameters
Zooming
Math Functions
Up to 6 of the following parameters can be calculated at one time on any waveform: Amplitude, Area, Base (Low), Delay,
Duty, Fall Time (90%–10%), Fall Time (80%–20%), Frequency, Maximum, Mean, Minimum, Overshoot+, Overshoot-,
Period, Peak-Peak, Phase, Rise Time (10%–90%), Rise Time (20%–80%), RMS, Skew, Standard Deviation, Top (High),
Width+, Width-. Measurements can be gated.
Use front panel QuickZoom button, or use touch screen or mouse to draw a box around the zoom area.
Functions include Sum, Difference, Product, Ratio, Absolute Value, Averaging (summed and continuous), Derivative,
Envelope, Enhanced Resolution (to 11-bits), Floor, Integral, Invert, Reciprocal, Rescale (change scale and units), Roof,
Square, Square Root and FFT (up to 1 Mpts with power spectrum output and rectangular, VonHann, and FlatTop
windows). 1 math function may be defined at a time, 2 functions may be chained together.
Display System
Display Type
Display Resolution
Color, 10.4" TFT-LCD Touch Screen
SVGA: 800 x 600 pixels
Connectivity
Ethernet Port
USB Ports
GPIB Port (Optional)
External Monitor Port
Remote Control
Network Communication
Standard
10/100/1000Base-T Ethernet interface (RJ-45 connector)
(5) USB Ports
Supports IEEE – 488.2
Standard 15-pin D-Type SVGA-compatible DB-15 connector
Via Windows Automation, or via LeCroy Remote Command Set
VXI-11 or VICP, LXI Class C Compliant
Physical
Dimensions (HWD)
Net Weight
260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
7.26 kg. (16.0 lbs.)
11
ORDERING INFORMATION
Product Description
Product Code
WaveSurfer MXs-B Oscilloscopes
200 MHz, 2.5 GS/s, 4 Ch, 12.5 Mpts/Ch DSO
with 10.4" Color Touch Screen Display.
25 Mpts Interleaved
400 MHz, 5 GS/s, 2 Ch, 12.5 Mpts/Ch DSO
with 10.4" Color Touch Screen Display.
25 Mpts Interleaved
400 MHz, 5 GS/s, 4 Ch, 12.5 Mpts/Ch DSO
with 10.4" Color Touch Screen Display.
25 Mpts Interleaved
600 MHz,5 GS/s, 2 Ch, 12.5 Mpts/Ch DSO
with 10.4" Color Touch Screen Display.
10 GS/s, 25 Mpts Interleaved
600 MHz,5 GS/s, 4 Ch, 12.5 Mpts/Ch DSO
with 10.4" Color Touch Screen Display.
10 GS/s, 25 Mpts Interleaved
1 GHz, 5 GS/s, 4 Ch, 12.5 Mpts/Ch DSO
with 10.4" Color Touch Screen Display.
10 GS/s, 25 Mpts Interleaved
WaveSurfer 42MXs-B
WaveSurfer 44MXs-B
WaveSurfer 62MXs-B
WaveSurfer 64MXs-B
WaveSurfer 104MXs-B
MSO MXs-B Mixed Signal Oscilloscopes
MSO 44MXs-B
MSO 64MXs-B
MSO 104MXs-B
÷10, 500 MHz, 10 MΩ Passive Probe (Total of 1 Per Channel)
Getting Started Manual and Quick Reference Guide
Standard Ports: Ethernet, USB 2.0 (5), SVGA Video Out, Audio In/Out
Protective Front Cover
Anti-virus Software (Trial Version)
Standard Commercial Calibration and Performance Certificate
3-year Warranty
Included with MSO MXs-B
MS-250 Mixed Signal Oscilloscope Module
18 Channel Digital Lead Set
LeCroy Bus and USB2.0 Cables (1.3 m)
Ground Extenders (Qty. 20)
Flexible Ground Leads (Qty. 5)
Carrying Case
Operator’s Manual and Quick Reference Guide
General Accessories
WSXs-KYBD
WSXs-MOUSE
WS-GPIB
WSXs-HARDCASE
WSXs-SOFTCASE
WSXs-RACK
WSXs-POUCH
Mounting Accessory
WSXs-MS-CLAMP
Local Language Overlays
German Front Panel Overlay
French Front Panel Overlay
Italian Front Panel Overlay
1-800-5-LeCroy
www.lecroy.com
Spanish Front Panel Overlay
Japanese Front Panel Overlay
Korean Front Panel Overlay
Chinese (Tr) Front Panel Overlay
Chinese (Simp) Front Panel Overlay
Russian Front Panel Overlay
WSXs-A-FP-SPANISH
WSXs-A-FP-JAPANESE
WSXs-A-FP-KOREAN
WSXs-A-FP-CHNES-TR
WSXs-A-FP-CHNES-SI
WSXs-A-FP-RUSSIAN
Serial Data Options
I2C, SPI and UART Trigger and Decode Option
WSXs-EMB
I2C Bus Trigger and Decode Option
WSXs-I2Cbus TD
UART and RS-232 Trigger and Decode Option
WSXs-UART-RS232bus TD
CAN, LIN and FlexRay Trigger and Decode Option
WSXs-AUTO
SPI Bus Trigger and Decode Option
WSXs-SPIbus TD
LIN Trigger and Decode Option
WSXs-LINbus TD
CAN TD Trigger and Decode Option
WSXs-CANbus TD
FlexRay Trigger and Decode Option
WSXs-FlexRaybus TD
MIL-STD-1553 Trigger and Decode Option
WSXs-1553 TD
ARINC 429 Symbolic Decode Option
WSXs-ARINC429bus DSymbolic
USB 2.0 Decode Option
WSXs-USB2bus D
D-PHY Decode Option
WSXs-DPHYbus D
DigRF 3G Decode Option
WSXs-DigRF3Gbus D
DigRF v4 Decode Option
WSXs-DigRFv4bus D
Audiobus Trigger and Decode Option
WSXs-Audiobus TD
for I2S, LJ, RJ, and TDM
MSO MXs-B Accessories
Included with Standard Configuration (WaveSurfer MXs-B and
MSO MXs-B)
Clamp Mounting Stand
Product Code
Local Language Overlays (cont’d)
WaveSurfer 24MXs-B
400 MHz, 5 GS/s, 4+18 Ch, 12.5 Mpts/Ch MSO with
10.4" Color Touch Screen Display. 25 Mpts Interleaved
600 MHz, 5 GS/s, 4+18 Ch, 12.5 Mpts/Ch MSO
with 10.4" Color Touch Screen Display.
10 GS/s, 25 Mpts Interleaved
1 GHz, 5 GS/s, 4+18 Ch, 12.5 Mpts/Ch MSO
with 10.4" Color Touch Screen Display.
10 GS/s, 25 Mpts Interleaved
Keyboard Accessory
Optical Mouse Accessory
External GPIB Accessory
Hard Carrying Case
Soft Carrying Case
Rack Mount Accessory
Accessory Pouch
Product Description
Large Gripper Probe Set for 0.10 Inch (2.54 mm)
Pin Pitch. Includes 10 Probes with Color-coded Leads
Medium Gripper Probe Set for 0.04 Inch (1.0 mm)
Pin Pitch. Includes 10 Probes with Color-coded Leads
Small Gripper Probe Set for 0.008 Inch (0.2 mm)
Pin Pitch. Includes 10 Probes with Color-coded Leads
18-pin 3M Interface Cable MSO-3M
(Mates with 3M Part Number 2520-6002)
36 Channel Mictor Connector
(Includes 1 MSO-MICTOR-SHROUD)
PK400-1
PK400-2
PK400-3
MSO-3M
MSO-Mictor
Probes and Amplifiers*
Set of 4 ZS1500, 1.5 GHz, 0.9 pF, 1 MΩ
ZS1500-QUADPAK
High Impedance Active Probe
ZS1000-QUADPAK
Set of 4 ZS1000, 1 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probe
200 MHz, 3.5 pF, 1 MΩ Active Differential Probe
ZD200
500 MHz, 1.0 pF, 1 MΩ Active Differential Probe
ZD500
1 GHz, 1.0 pF, 1 MΩ Active Differential Probe
ZD1000
1.5 GHz, 1.0 pF, 1 MΩ Active Differential Probe
ZD1500
30 A; 100 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse
CP031
30 A; 50 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse
CP030
30 A; 50 MHz Current Probe – AC/DC; 30 Arms; 50 Apeak Pulse
AP015
150 A; 10 MHz Current Probe – AC/DC; 150 Arms; 500 Apeak Pulse CP150
500 A; 2 MHz Current Probe – AC/DC; 500 Arms; 700 Apeak Pulse
CP500
1,400 V, 100 MHz High-Voltage Differential Probe
ADP305
1,400 V, 20 MHz High-Voltage Differential Probe
ADP300
1 Ch, 100 MHz Differential Amplifier
DA1855A
with Precision Voltage Source
*A wide variety of other passive, active, and differential probes are also available.
Consult LeCroy for more information.
Customer Service
WSXs-A-FP-GERMAN
WSXs-A-FP-FRENCH
WSXs-A-FP-ITALIAN
LeCroy oscilloscopes and probes are designed, built, and tested to ensure high
reliability. In the unlikely event you experience difficulties, our digital oscilloscopes
are fully warranted for three years, and our probes are warranted for one year.
This warranty includes: No charge for return shipping • Long-term 7-year support
• Upgrade to latest software at no charge
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
© 2011 by LeCroy Corporation. All rights reserved. Specifications, prices, availability, and delivery subject to change
without notice. Product or brand names are trademarks or requested trademarks of their respective holders.
WSMXs-B-MSO-MXs-B-DS-14Feb11
PDF
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising