Teccor brand Thyristors Dxx15L & Dxx20L & Dxx25L Series

Teccor brand Thyristors Dxx15L & Dxx20L & Dxx25L Series
Teccor® brand Thyristors
15 / 20 / 25 Amp Rectifiers
Dxx15L & Dxx20L & Dxx25L Series
RoHS ®
Description
Silicon rectifiers that are excellent for DC phase control
applications with motor loads.
Isolated mounting tab allows for use in circuits with
common anode or common cathode connections.
Features & Benefits
• RoHS Compliant
• Surge capability up to
350 A
• Glass – passivated
junctions
• Voltage capability up to
1000 V
Agency Approval
Agency
Agency File Number
L Package : E71639
®
Applications
Typical applications are AC to DC solid-state switches for
industrial power tools, exercise equipment, white goods,
and commercial appliances.
Internally constructed isolated package is offered for ease
of heat sinking with highest isolation voltage.
Schematic Symbol
A
K
Main Features
Symbol
Additional Information
Datasheet
Resources
Value
Unit
IT(RMS)
15 / 20 / 25
A
VRRM
400 to 1000
V
Samples
Absolute Maximum Ratings
Symbol
Parameter
Test Conditions
IF(RMS)
RMS forward current
IF(AV)
Average forward current
Dxx15L: TC = 90°C
Dxx20L/Dxx25L: TC = 80°C
Value
Unit
Dxx15L
Dxx20L
Dxx25L
15
20
25
A
9.5
12.7
15.9
A
single half cycle; f = 50Hz;
TJ (initial) = 25°C
188
255
300
single half cycle; f = 60Hz;
TJ (initial) = 25°C
225
300
350
tp = 8.3 ms
210
374
508
IFSM
Peak non-repetitive surge current
I2t
I2t Value for fusing
Tstg
Storage temperature range
-40 to 150
°C
Operating junction temperature range
-40 to 125
°C
TJ
Note: xx = voltage
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
A
A2s
Teccor® brand Thyristors
15 / 20 / 25 Amp Rectifiers
Electrical Characteristics (TJ = 25°C, unless otherwise specified)
Symbol
trr
Parameter
Test Conditions
Reverse-recovery Time
IF=0.9A, IR=1.5A
Value
Unit
4
μs
TYP.
Static Characteristics
Symbol
Test Conditions
Value
Unit
1.6
V
15A Device IT = 30A; tp = 380μs
20A Device IT = 40A; tp = 380μs
VFM
MAX.
25A Device IT = 50A; tp = 380μs
TJ = 25°C
IRM
VRRM
400-600V
10
800-1000V
20
400-800V
TJ = 100°C
TJ = 125°C
500
MAX.
1000V
3000
400-800V
1000
μA
Thermal Resistances
Symbol
Parameter
Junction to case (AC)
Rθ(J-C)
Value
Dxx15L
2.60
Dxx20L
2.55
Dxx25L
2.50
Unit
°C/W
Note: xx = voltage
Figure 1: On-State Current vs. On-State
Voltage (Typical)
Figure 2: Power Dissipation vs. Average Forward OnState Current (Typical)
20
TJ = 25°C
140
Average Forward Power Dissipation
[PF(AV)] - (Watts)
Instantaneous Forward Current (iF) – Amps
160
Dxx20L
Dxx25L
120
100
80
Dxx15L
60
40
20
Dxx25L
Dxx20L
16
Dxx15L
12
8
4
Single pulse rectification
60Hz sine wave
0
0
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
Instantaneous Forward Voltage (vF) – Volts
1.7
1.8
0
2
4
6
8
10
12
14
16
Average Forward Current [IF(AV)] - Amps
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
15 / 20 / 25 Amp Rectifiers
Figure 3: Maximum Allowable Case Temperature vs.
Average On-State Current
Figure 4: Surge Peak On-State Current vs.
Number of Cycles
1000
130
125
Peak Surge (Non-repetitive)
Forward Current (IFSM) – Amps
Maximum Allowable Case
Temperature (TC) - °C
120
115
110
105
100
Dxx25L
95
Dxx15L
90
85
80
CURRENT WAVEFORM: Sinusoidal
LOAD: Resistive or Inductive
CONDUCTION ANGLE: 180°
75
2
4
6
8
Dxx20L
Dxx15L
10
Dxx20L
1
70
0
Dxx25L
100
10
12
14
16
1
18
10
100
1000
Surge Current Duration -- Full Cycles
Average Forward Current [IF(AVE)] - Amps
Supply Frequency: 60Hz Sinusoidal
Load: Resistive
RMS Forward Current : [IT(RMS)]: Maximum Rated
Value at Specific Case Temperature
Note: xx = voltage
Soldering Parameters
Pre Heat
Pb – Free assembly
- Temperature Min (Ts(min))
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
60 – 180 secs
Average ramp up rate (Liquidus Temp)
(TL) to peak
5°C/second max
TS(max) to TL - Ramp-up Rate
5°C/second max
Reflow
- Temperature (TL) (Liquidus)
217°C
- Temperature (tL)
60 – 150 seconds
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
20 – 40 seconds
Ramp-down Rate
5°C/second max
Time 25°C to peak Temperature (TP)
8 minutes Max.
Do not exceed
280°C
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
tP
TP
Temperature
Reflow Condition
Ramp-up
TL
tL
TS(max)
Preheat
TS(min)
25
Ramp-do
Ramp-down
tS
time to peak temperature
Time
Teccor® brand Thyristors
15 / 20 / 25 Amp Rectifiers
Physical Specifications
Environmental Specifications
Test
Terminal Finish
100% Matte Tin Plated
Body Material
UL recognized epoxy meeting flammability
classification 94V-0
Lead Material
Copper Alloy
Design Considerations
Careful selection of the correct device for the application’s
operating parameters and environment will go a long way
toward extending the operating life of the rectifier. Good
design practice should limit the maximum continuous
current through the main terminals to 75% of the device
rating. Other ways to ensure long life for a power discrete
semiconductor are proper heat sinking and selection of
voltage ratings for worst case conditions. Overheating,
overvoltage (including dv/dt), and surge currents are
the main killers of semiconductors. Correct mounting,
soldering, and forming of the leads also help protect
against component damage.
Specifications and Conditions
MIL-STD-750: Method 1040, Condition A
Rated VRRM, 125°C, 1008 hours
MIL-STD-750: Method 1051
Temperature Cycling
-40°C to 150°C, 15-minute dwell,
100 cycles
Biased Temperature & EIA/JEDEC: JESD22-A101
Humidity
320VDC, 85°C, 85%RH, 1008 hours
MIL-STD-750: Method 1031
High Temp Storage
150°C, 1008 hours
High Temperature
Voltage Blocking
Low-Temp Storage
1008 hours; -40°C
Thermal Shock
MIL-STD-750: Method 1056
0°C to 100°C, 5-minute dwell,
10-second transfer, 10 cycles
Autoclave
EIA/JEDEC: JESD22-A102
(Pressure Cooker Test) 121°C, 100%RH, 2atm, 168 hours
Resistance to
Solder Heat
MIL-STD-750: Method 2031
260°C, 10 seconds
Solderability
ANSI/J-STD-002, Category 3, Test A
Lead Bend
MIL-STD-750: Method 2036, Condition E
Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab
TC MEASURING POINT
O
A
E
P
AREA (REF.) 0.17 IN2
8.13
.320
Dimension
A
B
C
13.36
.526
D
7.01
.276
F
R
G
L
H
CATHODE
ANODE Not Used
K
J
N
M
Note: Maximum torque to
be applied to mounting tab
is 8 in-lbs. (0.904 Nm).
Inches
Millimeters
Min
Max
Min
Max
0.380
0.420
9.65
10.67
B
0.105
0.115
2.67
2.92
C
0.230
0.250
5.84
6.35
D
0.590
0.620
14.99
15.75
E
0.142
0.147
3.61
3.73
F
0.110
0.130
2.79
3.30
G
0.540
0.575
13.72
14.61
H
0.025
0.035
0.64
0.89
J
0.195
0.205
4.95
5.21
K
0.095
0.105
2.41
2.67
L
0.060
0.075
1.52
1.91
M
0.085
0.095
2.16
2.41
N
0.018
0.024
0.46
0.61
O
0.178
0.188
4.52
4.78
P
0.045
0.060
1.14
1.52
R
0.038
0.048
0.97
1.22
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
Teccor® brand Thyristors
15 / 20 / 25 Amp Rectifiers
Product Selector
Voltage
Part Number
Type
Package
X
Rectifier
TO-220L
X
X
Rectifier
TO-220L
X
X
Rectifier
TO-220L
400V
600V
800V
1000V
Dxx15L
X
X
X
Dxx20L
X
X
Dxx25L
X
X
Note: xx = Voltage
Packing Options
Part Number
Marking
Weight
Packing Mode
Base Quantity
Dxx15L
Dxx15L
2.2 g
Bulk
500
Dxx15LTP
Dxx15L
2.2 g
Tube
500 (50 per tube)
Dxx20L
Dxx20L
2.2 g
Bulk
500
Dxx20LTP
Dxx20L
2.2 g
Tube
500 (50 per tube)
Dxx25L
Dxx25L
2.2 g
Bulk
500
Dxx25LTP
Dxx25L
2.2 g
Tube
500 (50 per tube)
Note: xx = Voltage
Part Numbering System
Part Marking System
D 60 15 L 59
DEVICE TYPE
D: Rectifier
TO-220AB - (L Package)
LEAD FORM DIMENSIONS
xx: Lead Form Option
VOLTAGE RATING
40: 400V
60: 600V
80: 800V
K0: 1000V
CURRENT RATING
15: 15A
20: 20A
25: 25A
D6015L
YMXXX
Date Code Marking
PACKAGE TYPE
L: TO-220 (Isolated)
®
K
© 2014 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 12/14/14
A
not
used
Y:Year Code
M: Month Code
XXX: Lot Trace Code
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement