JK5000DF GE 27" Built-In Single Convection Wall Oven 8-3/4"

JK5000DF GE 27" Built-In Single Convection Wall Oven 8-3/4"
Cutout depth
23-1/2" MIN
8-3/4" MAX.
F
JK5000DF
F
Junction box
Cutout
depth
location Wall
Convection
GE® 27" Built-In Single 23-1/2" MIN
Oven
Cutout depth
23-1/2" MIN
Junction box
Dimensions and Installation
Information
(in inches)
Cutout width
22" to
location
25" MIN.
bottom
of
Note: Cabinets installed adjacent to wall
25-1/4"
MAX.
junction
box
Conduit
ovens must have
an adhesion spec of at least a
40"
22" to
bottom of
junction box
Conduit If marks, blemishes or the cutout
Note:
40" is visible above the installed oven, it
opening
may be necessary
D to add wood shims under
the runners and front trim until the marks or
openings
are covered.
D
A
B
A
B
Note:
22 " Door handle protrudes 3" from door
face. Cabinets and drawers on adjacent 45° and
22 " 90° walls should be placed to avoid interference
with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance with
installation instructions.
Installation Information: Before
installing, consult instructions packed with
product for current dimensional data.
CL
C
C
Cutout height
27-5/8" MIN.
28-1/8" MAX.
Recommended
cutout location
from floor
32-1/2"
Conduit Junction box
location
40"
F
E
Cutout width
25" MIN.
25-1/4" MAX.
194°F temperature rating.
8-3/4" MAX.
Conduit
40"
E
Cutout height
27-5/8" MIN.
28-1/8" MAX.
D
Recommended
cutout location
from floor
32-1/2"
23"
minimum
door opening
allowance
D
22 "
22" to
bottom of
junction box
Cuto
25
25-1/
B
23" minimum
22 "
door opening
allowance
27''
27''
CK7000
PK7000
JK5000
JK3000
JK1000
2 x 4 or
KW Rating
equivalent runners
2 x 4 or
240Vrunners
level3.6
with bottom of cutout
equivalent
Cabinet
and flush
with sides of cutout Cabinet
level with
bottom
208V
2.7of cutout
A – Overlap of oven at top of cutout27"
and flush with
sides bottom
of cutoutfloor.
or solid
A – Overlap of oven
top of cutout
1" of cutout
Breaker
Size
B –atOverlap
of oven over side of edges
or solid bottom floor.
B – Overlap of oven
side of
1"
C –over
Overlap
ofedges
oven of
at cutout
bottom of cutout
240V
20 Amps
C – Overlap of oven at bottom of cutout
1"
Oven
208V
20 Amps
Oven
D – Install depth
D – Install depth
23-1/2"
port
200
lbs.)
E – Overall height with trim
bs.)
E – Overall height with trim
28-7/8"
F – Overall widthF – Overall width
26-3/4"
CK7000
PK7000
JK5000
JK3000
JK1000
JK5000
27"
1"
1"
1"
Suitable
bracing
to support
runners
23-1/2"
28-7/8"
26-3/4"
For answers to your Monogram,® GE Profile™
or GE® appliance questions, visit our website
at geappliances.com or call GE Answer Center®
service, 800.626.2000.
CL
CL
2 x 4 or
2 x 4 or
equivalent runners
equivalent runners
of cutout
level with bottom of cutout level with bottom
Cabinet
of cutout
and flush with sides of cutoutand flush withAsides
– Overlap of oven at top of cutout
or solid bottom floor.
or solid bottom floor.
B – Overlap of oven over side of edg
C – Overlap of oven at bottom of cu
Oven
D – Install depth
Suitable
(must supportbracing
200 lbs.)
E – Overall height with trim
F – Overall width
to support (must support 200 lbs.)
runners
Listed by
Underwriters
Laboratories
Specification Created 5/15
8-3/4"
Side by Side single ovens
JK5000DF
25" MIN.
25 1/4" MAX.
Allow 1"
cooktops27may
installed over thisunit overlap
5/8"beMIN.
all edges
ktop installation
for cutout
size.
28 1/8" instructions
MAX.
p of oven for approved cooktop models.
22" MIN.
Above
support
platform
36"
Typical
countertop
height
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line
Center Line
GE® 27" Built-In Single Convection Wall Oven
30" models
27" models
240V / 208V
Undercounter
Dimensions and Installation
Information
Junction box
location
Gas or electric connections
for gas cooktop must be
located in24
an adjacent
accessible location to the right
Note: 36" ribbon
cooktops are approved
8-3/4"
for use over GE 30" single4wall
ovens and
"
warming
drawers.
30"
ribbon
cooktops
are
3/4" Support
platform required
approved for use over GE 30" and GE 27"
single wall ovens and warming drawers.
25" MIN.
25 1/4"
MAX. to cooktop and wall oven installation
Refer
Allow 1"
36"
22" MIN.
unit
overlap withAbove
information
packed
products for
Typicalcurrent
ust Support
27200
5/8"Lbs.
MIN.
all edges
countertop
support
28 1/8"
MAX.
dimensional
data.
height
platform
Cutout observe all
dimensions and
requirements.
Cutout observe all
dimensions and
requirements.
Side by
byside
Sidesingle
single ovens
ovens
Side
2 " MIN.
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line
Center Line
Gas or electric cooktops may be installed over this
oven. See cooktop installation instructions for cutout size.
See label on top of oven for approved cooktop models.
25
30" models
8-3/4"
27" models
Electric wall ovens are not 24
approved for
installation with a plug and receptacle.
They must be hard wired in accordance
4"
with installation instructions.
Cutout observe all
dimensions and
requirements.
Cutout observe all
dimensions and
requirements.
3/4" Support
platform required
2 " MIN.
Note: Oven is rated for use only under
GE 30" standard or sealed burner gas and
selected
GE 30" smoothtop and Calrod®
3-1/4 200
Must Support
Lbs.
electric cooktops.
Installation information:
Before
installing,
2 (two)
90°elbows
&
sufficient pipe to
consult installation instructions
packed with
connect in adjacent
cabinet
productConduit
for current dimensional
data.
40"
Junction box
for oven
Junction box in
adjacent cabinet
for cooktop
hook-up
1/2" Black
iron pipe
3-1/4
Pressure
regulator
22
Union
Shut-off
valve
3/4" Support
Conduit
40"
Power cord
for cooktop
2 (two)
90°elbows &
sufficient pipe to
connect in adjacent
cabinet
Junction box
for oven
Right cabinet side
Side
bySide
sidesingle
single
ovens
Side by
ovens
under
under
cooktop
and
counter
cooktop and counter
Side-by-Side Installations
Install two ovens in separate cutouts.
Side View
Pressure
regulator
22
Junction box in
adjacent cabinet
for cooktop
hook-up
Union
Shut-off
valve
3/4" Support
Power cord
for cooktop
30" models
Center Line
Allow 1"
unit overlap
all edges
22" MIN.
Above
support
platform
36"
Typical
countertop
height
24
4"
3/4" Support
platform required
27" models
Cooktop
Must Support 200 Lbs.
Cutout - observe
all dimensions and
requirements.
Cutout - observe
all dimensions and
requirements.
Side by Side single ovens under
cooktop and counter
2 " MIN.
NOTE: One cooktop may be centered over either oven in
Side-by-Side
the side-by-side
istallation.Installations
Install two ovens in separate cutouts.
Center Line
1/2" Black
iron pipe
25" MIN.
25 1/4" MAX.
27 5/8" MIN.
28 1/8" MAX.
Center Line
Gas or electric connections
for gas cooktop must be
located in an adjacent
accessible location to the right
240V / 208V
Junction box
location
30" models
Center Line
®
27" Monogram,
models
For answers to your
GE Profile™
or GE® appliance questions, visit our website
Cooktop
at geappliances.com or call GE Answer Center®
service,
Cutout800.626.2000.
- observe
Cutout - observe
all dimensions and
requirements.
3-1/4
Specification Created 5/15
all dimensions and
requirements.
2 " MIN.
2 (two) 90°elbows &
JK5000DF
GE® 27" Built-In Single Convection Wall Oven
Features and Benefits
True European Convection – Achieve delicious results from a third heating
element and fan combination
Convection
Convection
1 Rack/Multi
Self-clean with steam clean option – Clean your oven the way
you want
r
Self-clean heavy-duty oven racks – Conveniently clean your oven and racks
together
Glass touch controls – Set temperatures quickly and clean with
little effort
Halogen interior oven lighting – Easily see how your food is baking
Ten-pass bake element – Even baking is assured with heat that covers more
surface area
Eight-pass broil element – Get full broil coverage and even browning from
edge to edge
4.3 cu. ft. oven capacity – Cook more dishes at once
Black gloss oven interior – Enjoy a clean and sleek appearance
Hidden bake – Make cleanup easy by eliminating hard-toreach areas
Model JK5000DFBB – Black on black
Model JK5000DFWW – White on white
JK5000DFWW/BB
Specification Created 5/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising