Tannoy IW6TDC In-Wall Speaker 100V

Tannoy IW6TDC In-Wall Speaker 100V
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 1
iw6 TDC
Product Description
Features
The iw6 TDC is a full bandwidth in wall speaker system, using a 165mm (6.50") Tannoy
Dual Concentric™ point source, constant directivity drive unit with an additional 25mm
(1.00") Tannoy SuperTweeter™. Designed primarily for installation into standard stud
partition wall systems, it may also be used in cavity wall installations constructed with
standard thickness drywall as well as a wide range of other wall construction types with a
surface thickness of up to 25mm (1.00”).
High power handling and 91dB efficiency ensure this compact unit is ideally suited to
applications requiring the combination of premium sonic quality for music and speech
reinforcement and exceptional reliability and intelligibility.
The 165mm (6.50") Tannoy Dual Concentric™ drive unit comprises a multi fibre paper
pulp mid bass cone and a 25mm (1.00") ferrofluid cooled, titanium dome HF unit with
neodymium magnet system. The mid-bass and tweeter sections of this constant directivity
driver are coincidentally aligned to a true point source; ensuring a wide and controlled
dispersion for optimum coverage; this while avoiding the massive loss of energy, in the
vertical plane at the crossover frequency, inherent in two-way discrete designs.
The addition of a 25mm (1.00") titanium dome SuperTweeter™ extends the frequency
bandwidth out to over 50kHz, further enhancing the already class leading, low distortion
performance of the iw6 TDC with an exceptionally natural and open soundstage. The iw6
TDC is also equipped with dynamic high frequency protection.
The drivers and passive frequency dividing network are mounted in an injection moulded,
paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material.
The class leading performance is further enhanced by the inclusion of six self aligning,
spring loaded clamps; allowing for quick install but also for simple removal or reorientation
of the loudspeaker. The rigidity of the clamps and baffle combination crucially provides the
acoustically optimum bond to the wall surface without risk of distortion to the baffle itself.
Gold plated spring loaded terminals are provided for ease of installation and a steel back
can is available as an optional installation accessory.
• Extended frequency response and very low distortion
• Wide, controlled constant directivity dispersion for
optimum coverage
• Does not suffer from massive loss of energy in the
vertical plane at crossover caused by two way
discrete designs
• UV/weather resistant UL94V-0 ABS construction for
structural integrity
• Dynamic high frequency protection
• Six way self-aligning mounting system
• Ferrofluid cooled neodymium high frequency driver
• Five year warranty
Applications
•
•
•
•
•
•
•
•
•
•
Foreground music and paging systems
Multi-room audio systems
Home theatre
Business music systems
Boardrooms and offices
Retail environments
Retail outlets and shopping malls
Lounges and bars
Cruise ships
Courtrooms
Complementing any style of decor, the perforated metal grille and discreet moulded baffle
can be painted to blend seamlessly with any environment.
Tannoy Direct (UK)
TCGI (ROW sales)
TCGA (Americas sales)
Tannoy Middle East
T: 00 44 (0) 1236 420199
T: 00 45 8742 7000
T: 00 1 (519) 745 1158
T: 00 971 (04) 4401208
E: enquiries@tannoy.com
E: info@tcgroup-international.com
E: info@tcgroup-americas.com
E: enquiries@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW6TDC data file issue:1.10 // 05.02.2013
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 2
iw6 TDC
TECHNICAL SPECIFICATIONS
System
iw6 TDC
Frequency Response (-3dB) (1)
75Hz - 51kHz
Frequency Range (-10dB) (1)
36Hz - 54kHz
Transducers
Dual Concentric™ Point source, constant directivity driver
Low Frequency
1 x 165mm (6.50”)
High Frequency
25mm (1.00”) titanium dome with neodymium
magnet system
Supertweeter™
25mm (1.00”) titanium dome with neodymium
magnet system
System Sensitivity (1W @1m) (2) 91dB (1W - 2.83V for 8 Ohms)
Nominal Coverage Angle
90 degrees conical
Coverage Angle (1kHz to 6kHz) 110 degree conical
Directivity Factor (Q)
5.6 averaged 1kHz to 6kHz
Directivity Index (DI)
Rated Maximum SPL
Average
Average
Peak
6.5 averaged 1kHz to 6kHz
Physical
Construction
Baffle
UL 94V-0 rated ABS
Grille
Aluminum, with weather resistant coating
Back can Zinc plated steel (optional accessory)
Clamping Design
Six way, self aligning security toggle clamp system
Connectors
Gold plated connectors with spring terminals
Hole Cutout Size
271.50 x 168.50mm (10.70 x 6.63”)
Maximum wall thickness - 25mm (1.00”)
(3)
110.5dB
109dB (with optional THP60 transformer)
116.5dB
Power Handling
Average
Programme
Peak
90W
180W
360W
Dimensions
Front baffle
Recommended Amplifier Power 180W @ 8 Ohms
Nominal Impedance
320 x 209 x 104mm (12.60 x 8.23”) (H x W)
Front of baffle to rear 104mm (4.10”)
of magnet assembly
8 Ohms
Distortion
10% Full Power (5.5V)
250Hz
1kHz
10kHz
2nd Harmonic
2.00%
0.33%
0.67%
3rd Harmonic
0.12%
0.68%
0.21%
1% Full Power (1.73V)
250Hz
1kHz
10kHz
2nd Harmonic
0.57%
0.08%
0.27%
3rd Harmonic
0.14%
0.28%
0.3%
Crossover
1.8Hz, 16Hz
Front of wall to rear 99mm (3.90”)
of magnet assembly
Net Weight
3kg (6lbs 6oz)
Included Accessories Paint mask, cutout template, grille
Optional Accessories Steel back can
Steel back can with THP60 transformer
Plaster (mud) ring
Transformer Taps (optional)
70V
60W / 30W / 15W / 7.5W / OFF & Low Impedence operation
100V
60W / 30W / 15W / OFF & Low Impedence operation
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
Ordering Information
PART NUMBER
8000 3760
Tannoy Direct (UK)
TCGI (ROW sales)
TCGA (Americas sales)
Tannoy Middle East
MODEL NAME
COLOUR
PACKED QUANTITY
iw6 TDC
White
1
T: 00 44 (0) 1236 420199
T: 00 45 8742 7000
T: 00 1 (519) 745 1158
T: 00 971 (04) 4401208
E: enquiries@tannoy.com
E: info@tcgroup-international.com
E: info@tcgroup-americas.com
E: enquiries@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW6TDC data file issue:1.10 // 05.02.2013
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 3
iw6 TDC
PERFORMANCE MEASUREMENTS
1m on-axis frequency
q
y response
p
100
SPL, 1W/1m (dB)
90
80
70
60
50
10
ANECHOIC
FREQUENCY
RESPONSE
100
1000
10000
100000
frequency (Hz)
Impedance vs frequency
y
45
40
35
Impedance (ohms)
30
25
20
15
10
5
0
1
10
100
1000
10000
100000
frequency (Hz)
IMPEDANCE
Horizontal off-axis response
100
90
Level (dB)
80
70
0 deg
10 deg
20deg
30deg
40deg
60
50
OFF AXIS
RESPONSE
Tannoy Direct (UK)
TCGI (ROW sales)
TCGA (Americas sales)
Tannoy Middle East
10
100
1000
10000
100000
frequency (Hz)
T: 00 44 (0) 1236 420199
T: 00 45 8742 7000
T: 00 1 (519) 745 1158
T: 00 971 (04) 4401208
E: enquiries@tannoy.com
E: info@tcgroup-international.com
E: info@tcgroup-americas.com
E: enquiries@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW6TDC data file issue:1.10 // 05.02.2013
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 4
iw6 TDC
PERFORMANCE MEASUREMENTS
Beamwidth vs Frequency
360
330
300
270
Degrees
240
210
180
150
120
90
60
30
0
100
1000
10000
frequency (Hz)
BEAMWIDTH
DI vs Frequency
100
Q
Q
10
1
100
1000
10000
frequency (Hz)
DIRECTIVITY INDEX
Tannoy Direct (UK)
TCGI (ROW sales)
TCGA (Americas sales)
Tannoy Middle East
T: 00 44 (0) 1236 420199
T: 00 45 8742 7000
T: 00 1 (519) 745 1158
T: 00 971 (04) 4401208
E: enquiries@tannoy.com
E: info@tcgroup-international.com
E: info@tcgroup-americas.com
E: enquiries@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW6TDC data file issue:1.10 // 05.02.2013
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 5
iw6 TDC
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
100 Hz
125 Hz
160 Hz
200 Hz
0
330
30
0
330
-12
60
300
60
-24
-24
-36
-36
90
-48
270
330
-12
60
300
-24
-36
-36
90
0
270
30
330
0
30
-12
300
60
300
60
-24
-24
-36
-36
90
-48
T: 00 44 (0) 1236 420199
T: 00 45 8742 7000
T: 00 1 (519) 745 1158
T: 00 971 (04) 4401208
10 kHz
12.5 kHz
16 kHz
20 kHz
0
-12
Tannoy Direct (UK)
TCGI (ROW sales)
TCGA (Americas sales)
Tannoy Middle East
90
-48
4 kHz
5 kHz
6.3 kHz
8 kHz
0
270
60
-24
-48
330
30
0
-12
300
270
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
0
30
0
90
-48
630 Hz
800 Hz
1 kHz
1.25 kHz
0
330
30
0
-12
300
270
250 Hz
315 Hz
400 Hz
500 Hz
0
270
-48
90
E: enquiries@tannoy.com
E: info@tcgroup-international.com
E: info@tcgroup-americas.com
E: enquiries@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW6TDC data file issue:1.10 // 05.02.2013
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 6
iw6 TDC
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
100 Hz
125 Hz
160 Hz
200 Hz
0
330
30
0
330
-12
60
300
60
-24
-24
-36
-36
90
-48
270
330
-12
60
300
-24
-36
-36
90
0
270
30
330
0
30
-12
300
60
300
60
-24
-24
-36
-36
90
-48
T: 00 44 (0) 1236 420199
T: 00 45 8742 7000
T: 00 1 (519) 745 1158
T: 00 971 (04) 4401208
10 kHz
12.5 kHz
16 kHz
20 kHz
0
-12
Tannoy Direct (UK)
TCGI (ROW sales)
TCGA (Americas sales)
Tannoy Middle East
90
-48
4 kHz
5 kHz
6.3 kHz
8 kHz
0
270
60
-24
-48
330
30
0
-12
300
270
1.6 kHz
2 kHz
2.5 kHz
3.15 kHz
0
30
0
90
-48
630 Hz
800 Hz
1 kHz
1.25 kHz
0
330
30
0
-12
300
270
250 Hz
315 Hz
400 Hz
500 Hz
0
270
-48
90
E: enquiries@tannoy.com
E: info@tcgroup-international.com
E: info@tcgroup-americas.com
E: enquiries@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW6TDC data file issue:1.10 // 05.02.2013
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 7
iw6 TDC
DIMENSIONAL SKETCHES
209.0mm
8.25”
209.0
271.5mm
10.69”
320.0mm
12.60”
320.0
271.5
4.9mm
3.89”
4.9
337.0mm
13.27”
337.0
99.0mm
3.90”
104mm
4.10”
98.9
103.8
168.5mm
6.63”
168.5
iw6TDC
TDC--PRE-INSTALLATION
PRE-INSTALLATION
iw6
209.0mm
8.23”
251.0mm
9.88”
209.0
251.0
271.5mm
10.69”
320.0mm
12.60”
320.0
271.5
4.9mm
3.89”
4.9
168.5mm
6.63”
168.5
Tannoy Direct (UK)
TCGI (ROW sales)
TCGA (Americas sales)
Tannoy Middle East
T: 00 44 (0) 1236 420199
T: 00 45 8742 7000
T: 00 1 (519) 745 1158
T: 00 971 (04) 4401208
98.9mm
0.19”
103.8mm
4.09”
98.9
103.8
- POST-INSTALLATION
iw6 iw6
TDCTDC
- POST-INSTALLATION
E: enquiries@tannoy.com
E: info@tcgroup-international.com
E: info@tcgroup-americas.com
E: enquiries@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW6TDC data file issue:1.10 // 05.02.2013
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 8
INWALL BACK CAN ACCESSORY
STUD
WALL COVERING MATERIAL
FITTED AFTER BACK CAN HAS
BEEN INSTALLED IN POSITION.
12.5 min
[0.49"min]
101.6 min
[4.00"min]
BACK CAN FITTED IN STUD PARTITON
451.0
[17.76"]
180.0
[7.09"]
89.1
[3.51"]
TOP
420.0
[16.54"]
281.0
[11.06"]
477.0
[18.78"]
96.7
[3.81"]
310.0
[12.20"]
Ordering Information
PART NUMBER
8000 4020
8000 4230
8000 4250
Tannoy United Kingdom
Tannoy Deutschland
Tannoy France
TC|Group Americas
MODEL NAME
iw6 TDC/DS Back Can
iw6 TDC/DS Transformer Back Can
Pre-install mounting ring for iw6 TDC/TS
T: 00 44 (0) 1236 420199
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
T: 00 1 (519) 745 1158
BAFFLE / GRILLE
COLOUR
PACKED
QUANTITY
PACKED
WEIGHT
Unpainted Steel
Unpainted Steel
-
1
1
-
4.00Kgs (8.80lbs)
11.00Kgs (23.1lbs)
-
E: enquiries@tannoy.com
E: enquiries@tannoy.com
E: ventes@tannoy.com
E: info@tcgroup-americas.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW6TDC data file issue:1.10 // 05.02.2013
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 9
iw6 TDC
Architectural specifications
The in wall speaker shall consist of one 165mm (6.50") Dual Concentric™ transducer and one 25mm (1.00”) Supertweter™ mounted in an injection moulded
front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The three-way system shall incorporate an optimised low loss crossover
network. The wiring terminals shall be gold plated spring loaded connectors. Performance of the in wall speaker shall meet or exceed the following criteria:
The system shall have a coverage angle of 110 degrees (1kHz to 6kHz). Frequency response measured on axis shall be 36Hz - 54kHz (-10dB from rated
sensitivity, measured in an IEC baffle in an anechoic chamber) with no equalization. Sensitivity shall be 91dB (1W @ 1m). Long term power handling
capacity as defined in EIA-426B test shall be 90W, recommended amplifier power 180W @ 8 Ohms. The nominal system impedance shall be 8 Ohms.
In 70V or 100V distributed audio systems the iw6 TDC can be used with the optional the THP60 high performance, low insertion loss transformer with 60,
30, 15 and 7.5W taps* available.
A weather resistant perforated steel aluminum covers the transducer. Both the grille and baffle shall be paintable. The system shall not exceed the following
dimensions: 320 x 209 x 104mm or 12.60 x 8.23 x 4.10” (H x W x D).
Hole cutout size shall be 271.50 x 168.50mm or 10.71 x 6.63".
The in wall speaker system shall be the.....iw6 TDC.
*70.7 Volt only
Tannoy Direct (UK)
TCGI (ROW sales)
TCGA (Americas sales)
Tannoy Middle East
T: 00 44 (0) 1236 420199
T: 00 45 8742 7000
T: 00 1 (519) 745 1158
T: 00 971 (04) 4401208
E: enquiries@tannoy.com
E: info@tcgroup-international.com
E: info@tcgroup-americas.com
E: enquiries@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW6TDC data file issue:1.10 // 05.02.2013
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 10
iw6 TDC
NOTES
Tannoy Direct (UK)
TCGI (ROW sales)
TCGA (Americas sales)
Tannoy Middle East
T: 00 44 (0) 1236 420199
T: 00 45 8742 7000
T: 00 1 (519) 745 1158
T: 00 971 (04) 4401208
E: enquiries@tannoy.com
E: info@tcgroup-international.com
E: info@tcgroup-americas.com
E: enquiries@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW6TDC data file issue:1.10 // 05.02.2013
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 11
iw6 TDC
Tannoy Direct (UK)
TCGI (ROW sales)
TCGA (Americas sales)
Tannoy Middle East
T: 00 44 (0) 1236 420199
T: 00 45 8742 7000
T: 00 1 (519) 745 1158
T: 00 971 (04) 4401208
E: enquiries@tannoy.com
E: info@tcgroup-international.com
E: info@tcgroup-americas.com
E: enquiries@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW6TDC data file issue:1.10 // 05.02.2013
iW6_TDC_Data_Sheet_DJ_Layout 1 05/02/2013 12:17 Page 12
iw6 TDC
Tannoy Direct (UK)
TCGI (ROW sales)
TCGA (Americas sales)
Tannoy Middle East
T: 00 44 (0) 1236 420199
T: 00 45 8742 7000
T: 00 1 (519) 745 1158
T: 00 971 (04) 4401208
E: enquiries@tannoy.com
E: info@tcgroup-international.com
E: info@tcgroup-americas.com
E: enquiries@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW6TDC data file issue:1.10 // 05.02.2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising