SNAP Digital Output Modules Features
SNAP Digital Output Modules
Features
Description
Opto 22 SNAP I/O digital output
modules are part of the SNAP PAC
System.
Customers can choose from AC or DC
models. Optical isolation on all solidstate modules provides 4,000 volts of
transient (4000 V for 1 ms) protection
for sensitive control electronics from
industrial field signals.
All SNAP digital modules have
removable top-mounted connectors
to provide easy access for field wiring.
All operate on 5 VDC control logic.
Each digital module features integral
channel-specific LEDs for convenient
troubleshooting and maintenance.
Each module is factory tested twice
before shipment, and most modules
are UL and CE approved. In addition,
part numbers ending in FM are
Factory Mutual approved.
Part
Description
See
pages
SNAP-OAC5
SNAP 4-channel 12–250 VAC output, 5 VDC logic
3, 5
SNAP-OAC5MA
SNAP 4-channel isolated 12–250 VAC output, 5 VDC logic
with manual/auto switches
3, 6
SNAP-OAC5FM
SNAP 4-channel 12–250 VAC output, 5 VDC logic
4, 5
SNAP-OAC5-i
SNAP 4-channel isolated 12–250 VAC output, 5 VDC logic 3, 7
SNAP-OAC5-iFM
SNAP 4-channel isolated 12–250 VAC output, 5 VDC logic 4, 7
SNAP-ODC5SRC
SNAP 4-channel 5–60 VDC output, 5 VDC logic source
8, 14
SNAP-ODC5SRCFM SNAP 4-channel 5–60 VDC output, 5 VDC logic source
11, 14
SNAP-ODC5SNK
8, 15
SNAP 4-channel 5–60 VDC output, 5 VDC logic sink
SNAP-ODC5SNKFM SNAP 4-channel 5–60 VDC output, 5 VDC logic sink
11, 15
SNAP-ODC5ASNK
SNAP 4-channel 5–200 VDC output, 5 VDC logic sink
10, 15
SNAP-ODC5R*
SNAP 4-channel dry contact output, normally open
9, 16
SNAP-ODC5RFM*
SNAP 4-channel dry contact output, normally open
12, 16
SNAP-ODC5R5*
SNAP 4-channel dry contact output, normally closed
9, 16
SNAP-ODC5R5FM*
SNAP 4-channel dry contact output, normally closed
12, 16
SNAP-ODC5MA
SNAP 4-channel isolated 5–60 VDC output, 5 VDC logic
with manual/auto switches
10, 17
SNAP-ODC5-i
SNAP 4-channel isolated 5–60 VDC output, 5 VDC logic
10, 18
SNAP-ODC5-iFM
SNAP 4-channel isolated 5–60 VDC output, 5 VDC logic
13, 18
SNAP-ODC5A-i
SNAP 4-channel isolated 5–200 VDC output, 5 VDC logic
10, 18
SNAP-ODC5A-iFM
SNAP 4-channel isolated 5–200 VDC output, 5 VDC logic
13, 18
SNAP-RETN4
SNAP 4-module retention rail (OEM)
--------
SNAP-RETN4B
SNAP 4-module retention rail, 25-pack (OEM)
--------
SNAP-RETN6
SNAP 6-module retention rail (OEM)
--------
SNAP-RETN6B
SNAP 6-module retention rail, 25-pack (OEM)
--------
SNAP-FUSE4AB
SNAP 4-amp fuse, 25-pack
--------
SNAP-MODFUSEH
SNAP digital output module fuse holder, 10-pack
--------
DATA SHEET
The dry contact modules allow
switching of low power signals where
signal integrity must be maintained,
or where zero leakage current is a
requirement. Dry contact modules are
Part Numbers
Form 1144-101029
SNAP output modules are used to
switch up to four separate AC or DC
loads. Output modules that are fused
use a standard fuse with a convenient
handle for easy replacement. DC
outputs are available in either a source
or sink configuration. AC outputs are
zero voltage turn on and zero current
turn off for transient-free switching.
SNAP Digital Output Modules
SNAP Digital Output Modules
Four channels per module
Convenient pluggable wiring terminals; accepts up to
14 AWG wire
Powered by a single 5-volt supply
Channel-specific LEDs
Operating temperature: 0 to 70 °C
UL and CE approved (most modules); Factory Mutual
approved (part numbers ending in FM)
*Not UL approved
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
1
SNAP Digital Output Modules
SNAP Digital Output Modules
not solid-state devices. They use reed relays, which are
electromechanical devices. These modules do not provide
optical isolation. Current rating for dry contact modules
depends on the voltage they are used with, as shown in the
graph on page 16.
Processor
Module
position zero
Module connectors
Retention bar
SNAP-OAC5MA and SNAP-ODC5MA are special modules
featuring manual-on/manual-off/automatic switches, ideal for
diagnostic testing of control applications. The switches
override output from the application, so you can quickly check
field device wiring. These modules each contain four isolated
channels.
The SNAP-OAC5-i, SNAP-ODC5-i, and SNAP-ODC5A-i modules
provide four isolated output channels.
1.
For Ethernet-based applications requiring higher density of
digital I/O points, see Opto 22 form #1556, the SNAP HighDensity Digital Module Data Sheet.
2.
I/O Processor Compatibility
SNAP digital output modules are compatible with all SNAP
PAC brains and rack-mounted controllers, including both
standard wired models and Wired+Wireless™ models.
Notes for legacy hardware: SNAP digital output modules
are also compatible with SNAP Ultimate, SNAP Ethernet, and
SNAP Simple brains, as well as other SNAP brains such as the
serial B3000 and the B3000HA. These modules can also be
used on B-series and
M-series mounting racks.
Installation
3.
4.
5.
Place the rack so that the module connector numbers
are right-side up, with zero on the left, as shown in the
diagram above. (If your rack has screw connectors, the
screw connectors will be at the bottom.)
Position the module over the module connector,
aligning the small slot at the base of the module with
the retention bar on the rack. When positioning modules
next to each other, be sure to align the male and female
module keys at the tops of the modules before snapping
a module into position.
With the module correctly aligned, push on the module
to snap it into place.
(Optional) Use standard 4-40 x 1/2 truss-head Phillips
hold-down screws to secure both sides of each module.
CAUTION: Do not over-tighten screws.
Follow the wiring diagrams beginning on page 5 to
attach modules to the devices they monitor.
Modules require a special tool (provided) for removal.
The following diagram shows part of a SNAP mounting rack.
The rack is shown without screw connectors.
Modules snap securely into place in the row of connectors on
the rack. Each module connector has a number. Digital output
modules and other types of SNAP I/O modules are mounted
on the module connectors starting at module position zero.
Form 1144-101029
DATA SHEET
NOTE: Check the data sheet or user’s guide for the brain or onthe-rack controller you are using to determine module
features available and any restrictions on module placement.
PAGE
2
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Output Modules
Specifications—AC Modules
SNAP-OAC5
Key Feature
--
SNAP-OAC5MA
SNAP-OAC5-i
Diagnostic switches
Four isolated channels
Four isolated channels
Field Side Ratings (each channel)
24–250 VAC
24–250 VAC
24–250 VAC
Line Voltage - Nominal
120/240 VAC
120/240 VAC
120/240 VAC
Current Rating
0 °C to 70 °C Ambient
3 amps per module
3 amps per module
3 amps per module
One Cycle Surge
80 amps peak (50/60 Hz)
80 amps peak (50/60 Hz)
80 amps peak (50/60 Hz)
Minimum Load Current
20 mA
20 mA
20 mA
Output Voltage Drop
1.6 volts max.@ 0.75 amps 1.6 volts max.@ 0.75 amps
1.6 volts max.@ 0.75 amps
Off-state Leakage at
Nominal Voltage - 60 Hz
2.5 mA @ 240 VAC
1.25 mA @ 120 VAC
2.5 mA @ 240 VAC
1.25 mA @ 120 VAC
2.5 mA @ 240 VAC
1.25 mA @ 120 VAC
Peak Blocking Voltage
500 V
500 V
500 V
Operating Frequency
25–65 Hz
25–65 Hz
25–65 Hz
dV/ dt - Off-state
200 volts/msec
200 volts/msec
200 volts/msec
dV/ dt - Commutating
Snubbed for rated 0.5
power factor load
Snubbed for rated 0.5 power
factor load
Snubbed for rated 0.5 power
factor load
Fuse
(Common to all Channels)
250 VAC - 4A 5x20 mm
Has four isolated channels.
Fast-acting Bell Fuse Part
User must provide own fusNo. BEL 5HF4
ing.
Opto 22 Part No. SNAP-4A
Channel-to-channel isolation Not applicable
Has four isolated channels.
User must provide own fusing.
300 VAC
(1500 V transient)
300 VAC
(1500 V transient)
SNAP Digital Output Modules
Line Voltage - Range
Logic Side Ratings
Pickup Voltage
4 V @ 5.5 mA
4 V @ 5.5 mA
4 V @ 5.5 mA
Dropout Voltage
1 VDC
1 VDC
1 VDC
Control Resistance
220 ohms
220 ohms
220 ohms
Logic Supply Voltage
5 VDC ± 0.25 VDC
5 VDC ± 0.25 VDC
5 VDC ± 0.25 VDC
Logic Supply Current
50 mA maximum
50 mA maximum
50 mA maximum
Number of Channels Per
Module
4
4
4
Turn-on Time
0.5 cycle maximum
(zero volts crossover)
0.5 cycle maximum
(zero volts crossover)
0.5 cycle maximum
(zero volts crossover)
Turn-off Time
0.5 cycle maximum
(zero current crossover)
0.5 cycle maximum
(zero current crossover)
0.5 cycle maximum
(zero current crossover)
Isolation (Field Side to Logic
Side)
4,000 volts (transient)
4,000 volts (transient)
4,000 volts (transient)
Temperature
0 ° to 70 °C, operating
-30 ° to 85 °C, storage
0 ° to 70 °C, operating
-30 ° to 85 °C, storage
0 ° to 70 °C, operating
-30 ° to 85 °C, storage
Agency Approvals
UL, CE, CSA, RoHS,
DFARS
UL, CE, RoHS, DFARS
UL, CE, RoHS, DFARS
Warranty
Lifetime
30 months
Lifetime
Module Ratings
Form 1144-101029
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
PAGE
3
SNAP Digital Output Modules
Specifications—AC Modules (continued)
SNAP-OAC5-FM
Key Feature
Factory Mutual approved
SNAP-OAC5-i-FM
Four isolated channels
Factory Mutual approved
SNAP Digital Output Modules
Field Side Ratings (each channel)
Line Voltage - Range
24–250 VAC
24–250 VAC
Line Voltage - Nominal
120/240 VAC
120/240 VAC
Current Rating
0 °C to 70 °C Ambient
3 amps per module
3 amps per module
One Cycle Surge
80 amps peak (50/60 Hz)
80 amps peak (50/60 Hz)
Minimum Load Current
20 mA
20 mA
Output Voltage Drop
1.6 volts max.@ 0.75 amps
Off-state Leakage at Nominal 2.5 mA @ 240 VAC
Voltage - 60 Hz
1.25 mA @ 120 VAC
1.6 volts max.@ 0.75 amps
2.5 mA @ 240 VAC
1.25 mA @ 120 VAC
Peak Blocking Voltage
500 V
500 V
Operating Frequency
25–65 Hz
25–65 Hz
dV/ dt - Off-state
200 volts/msec
200 volts/msec
dV/ dt - Commutating
Snubbed for rated 0.5 power
factor load
Snubbed for rated 0.5 power
factor load
Fuse
(Common to all Channels)
250 VAC - 4A 5x20 mm
Fast-acting Bell Fuse Part No.
BEL 5HF4
Opto 22 Part No. SNAP-4A
Has four isolated channels.
User must provide own fusing.
Channel-to-channel isolation
Not applicable
300 VAC
(1500 V transient)
Pickup Voltage
4 V @ 5.5 mA
4 V @ 5.5 mA
Dropout Voltage
1 VDC
1 VDC
Control Resistance
220 ohms
220 ohms
Logic Supply Voltage
5 VDC ± 0.25 VDC
5 VDC ± 0.25 VDC
Logic Supply Current
50 mA maximum
50 mA maximum
Channels Per Module
4
4
Turn-on Time
0.5 cycle maximum
(zero volts crossover)
0.5 cycle maximum
(zero volts crossover)
Turn-off Time
0.5 cycle maximum
(zero current crossover)
0.5 cycle maximum
(zero current crossover)
Isolation (Field Side to Logic
Side)
4,000 volts (transient)
4,000 volts (transient)
Temperature
0 ° to 70 °C, operating
-30 ° to 85 °C, storage
0 ° to 70 °C, operating
-30 ° to 85 °C, storage
Agency Approvals
CE, FM, RoHS, DFARS
CE, FM, RoHS, DFARS
Warranty
Lifetime
Lifetime
Logic Side Ratings
Form 1144-101029
DATA SHEET
Module Ratings
PAGE
4
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Output Modules
Schematics
SNAP-OAC5 Output Module
Part Number
Description
SNAP-OAC5
4-channel AC output 12–250 VAC 5 VDC logic
SNAP-OAC5FM
4-channel AC output 12–250 VAC 5 VDC logic,
Factory Mutual approved
SNAP Digital Output Modules
Form 1144-101029
DATA SHEET
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
5
SNAP Digital Output Modules
Schematics
Part Number
Description
SNAP-OAC5MA
4-channel isolated AC output 12–250 VAC, 5
VDC logic, with manual/auto switch
Form 1144-101029
DATA SHEET
SNAP Digital Output Modules
SNAP-OAC5MA Output Module
With Manual/Auto Switches
PAGE
6
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Output Modules
Schematics
SNAP-OAC5i Isolated Output Module
Part Number
Description
SNAP-OAC5-i
4-channel isolated AC output 12–250 VAC,
5 VDC logic
SNAP-OAC5-iFM
4-channel isolated AC output 12–250 VAC,
5 VDC logic, Factory Mutual approved
SNAP Digital Output Modules
Form 1144-101029
DATA SHEET
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
PAGE
7
SNAP Digital Output Modules
Specifications—DC Modules
SNAP-ODC5SRC
Key Feature
Load sourcing
SNAP-ODC5SNK
Load sinking
SNAP Digital Output Modules
Field Side Ratings (each channel)
Line Voltage - Range
5–60 VDC
5–60 VDC
Line Voltage - Nominal
5–48 VDC
5–48 VDC
Current Rating 0 °C to 70
°C Ambient
3 amps per module
3 amps per module
Surge Current
5 amps peak for
1 second
5 amps peak for
1 second
Minimum Load
20 mA
20 mA
Output Voltage Drop
1.6 volts max.@ 0.75 amps
1.6 volts max.@ 0.75 amps
Off-state Leakage
1 mA @ 60 VDC
1 mA @ 60 VDC
Peak Blocking Voltage
60 VDC
60 VDC
Fuse
(Common to all Channels)
250 VAC - 4A 5x20 mm
Fast-acting Bell Fuse Part No.
BEL 5HF4
Opto 22 Part SNAP-4A
250 VAC - 4A 5x20 mm
Fast-acting Bell Fuse Part No.
BEL 5HF4
Opto 22 Part SNAP-4A
Channel-to-channel
isolation
Not applicable
Not applicable
Pickup Voltage
4 V @ 5.5 mA
4 V @ 5.5 mA
Dropout Voltage
1 VDC
1 VDC
Control Resistance
220 ohms
220 ohms
Logic Supply Voltage
5 VDC ± 0.25 VDC
5 VDC ± 0.25 VDC
Logic Supply Current
50 mA maximum
50 mA maximum
Number of Channels Per
Module
4
4
Turn-on Time
100 usec
100 usec
Turn-off Time
750 usec
750 usec
Isolation (Field Side to
Logic Side)
4,000 volts (transient)
4,000 volts (transient)
Temperature
0 to 70 °C, operating
-30 to 85 °C, storage
0 to 70 °C, operating
-30 to 85 °C, storage
Agency Approvals
UL, CE, CSA, RoHS, DFARS
UL, CE, CSA, RoHS, DFARS
Warranty
Lifetime
Lifetime
Logic Side Ratings
Form 1144-101029
DATA SHEET
Module Ratings
PAGE
8
* The power rating of the dry contact module must not exceed 10 VA under steady state or
momentary in-rush conditions. For voltages at or below 20 volts, the current limit is
0.5 amps. For voltages above 20 volts, the maximum allowable current is determined by the
following equation: 10 VA / Voltage = Current maximum. Rating curve is in the data sheet.
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Output Modules
Specifications—DC Modules (continued)
SNAP-ODC5R
Dry contact
Normally open
Key Feature
SNAP-ODC5R5
Dry contact
Normally closed
Field Side Ratings (each channel)
0–100 VDC
0–130 VAC*
0–100 VDC
0–130 VAC*
Line Voltage - Nominal
--
--
Current Rating 0 °C to 70
°C Ambient
0.5 amps switching*
0.5 amps switching*
Surge Current
0.5 amps*
0.5 amps*
Minimum Load
0 mA
0 mA
Output Voltage Drop
0 volts
0 volts
Off-state Leakage
0 mA
0 mA
Peak Blocking Voltage
100 VDC / 130 VAC
100 VDC / 130 VAC
Fuse
(Common to all Channels)
Has four isolated channels.
User must provide own fusing.
Has four isolated channels.
User must provide own fusing.
Channel-to-channel
isolation
300 VAC (1500 V
transient)
300 VAC (1500 V
transient)
Logic Side Ratings
Pickup Voltage
4 V @ 5.5 mA
4 V @ 5.5 mA
Dropout Voltage
1 VDC
1 VDC
Control Resistance
220 ohms
220 ohms
Logic Supply Voltage
5 VDC ± 0.25 VDC
5 VDC ± 0.25 VDC
Logic Supply Current
50 mA maximum
50 mA maximum
Number of Channels Per
Module
4
4
Turn-on Time
500 usec
500 usec
Turn-off Time
500 usec
500 usec
Isolation (Field Side to
Logic Side)
1,500 volts (transient)
1,500 volts (transient)
Mechanical Life
200,000,000 cycles
200,000,000 cycles
Temperature
0 to 70 °C, operating
-30 to 85 °C, storage
0 to 70 °C, operating
-30 to 85 °C, storage
Agency Approvals
CE, CSA, RoHS, DFARS
CE, RoHS, DFARS
Warranty
30 months or mechanical life,
whichever comes first
30 months or mechanical life,
whichever comes first
SNAP Digital Output Modules
Line Voltage - Range
Module Ratings
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
Form 1144-101029
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
DATA SHEET
* The power rating of the dry contact module must not exceed 10 VA under steady state or
momentary in-rush conditions. For voltages at or below 20 volts, the current limit is 0.5 amps.
For voltages above 20 volts, the maximum allowable current is determined by the following
equation: 10 VA / Voltage = Current maximum. Rating curve is in the data sheet.
PAGE
9
SNAP Digital Output Modules
Specifications—DC Modules (continued)
Key Feature
SNAP-ODC5MA
SNAP-ODC5-i
SNAP-ODC5A-i
Diagnostic switches
Four isolated channels
Four isolated channels
Four isolated channels
SNAP-ODC5ASNK
Load sinking
SNAP Digital Output Modules
Field Side Ratings (each channel)
Line Voltage - Range
5–60 VDC
5–60 VDC
5–200 VDC
5–200 VDC
Line Voltage - Nominal
5–48 VDC
5–48 VDC
5–200 VDC
5–200 VDC
Current Rating
0 °C to 70 °C Ambient
2 amps per module
0.5 amps per channel
3 amps per module
3 amps per module
3 amps per module
Surge Current
1.5 amps peak for
1 second
5 amps peak for
1 second
5 amps peak for
1 second
5 amps peak for
1 second
Minimum Load
20 mA
20 mA
20 mA
20 mA
Output Voltage Drop
1.6 volts max.@
0.75 amps
1.6 volts max.@
0.75 amps
1.6 volts max.@
0.75 amps
1.6 volts max.@
0.75 amps
Off-state Leakage
1 mA @ 60 VDC
1 mA @ 60 VDC
1 mA @ 200 VDC
1 mA @ 200 VDC
Peak Blocking Voltage
60 VDC
60 VDC
200 VDC
200 VDC
Fuse
(Common to all Channels)
Has four isolated
channels. User must
provide own fusing.
Has four isolated
channels. User must
provide own fusing.
Has four isolated
channels. User must
provide own fusing.
250 VAC - 4A 5x20 mm
Fast-acting Bell Fuse
Part No. BEL 5HF4
Opto 22 Part No.
SNAP-4A
Channel-to-channel
isolation
300 VAC
(1500 V transient)
300 VAC
(1500 V transient)
300 VAC
(1500 V transient)
Not applicable
Pickup Voltage
4 V @ 5.5 mA
4 V @ 5.5 mA
4 V @ 5.5 mA
4 V @ 5.5 mA
Dropout Voltage
1 VDC
1 VDC
1 VDC
1 VDC
Control Resistance
220 ohms
220 ohms
220 ohms
220 ohms
Logic Supply Voltage
5 VDC ± 0.25 VDC
5 VDC ± 0.25 VDC
5 VDC ± 0.25 VDC
5 VDC ± 0.25 VDC
Logic Supply Current
50 mA maximum
50 mA maximum
50 mA maximum
50 mA maximum
Number of Channels Per
Module
4
4
4
4
Turn-on Time
100 usec
100 usec
100 usec
100 usec
Turn-off Time
750 usec
750 usec
750 usec
750 usec
Isolation (Field Side to
Logic Side)
4,000 volts (transient)
4,000 volts (transient)
4,000 volts (transient)
4,000 volts (transient)
Temperature
0 ° to 70 °C, operating
-30 ° to 85 °C, storage
0 ° to 70 °C, operating
-30 ° to 85 °C, storage
0 ° to 70 °C, operating
-30 ° to 85 °C, storage
0 ° to 70 °C, operating
-30 ° to 85 °C, storage
Agency Approvals
UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS UL, CE, RoHS, DFARS
Warranty
30 months
Logic Side Ratings
Form 1144-101029
DATA SHEET
Module Ratings
PAGE
10
Lifetime
Lifetime
Lifetime
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Output Modules
Specifications—DC Modules (continued)
SNAP-ODC5SRCFM
Key Feature
Factory Mutual approved
SNAP-ODC5SNKFM
Factory Mutual approved
Field Side Ratings (each channel)
Line Voltage - Range
5–60 VDC
5–60 VDC
Line Voltage - Nominal
5–48 VDC
5–48 VDC
3 amps per module
Surge Current
5 amps peak for
1 second
5 amps peak for
1 second
Minimum Load
20 mA
20 mA
Output Voltage Drop
1.6 volts max.@ 0.75 amps
1.6 volts max.@ 0.75 amps
Off-state Leakage
1 mA @ 60 VDC
1 mA @ 60 VDC
Peak Blocking Voltage
60 VDC
60 VDC
Fuse
(Common to all Channels)
250 VAC - 4A 5x20 mm
Fast-acting Bell Fuse Part No. BEL 5HF4
Opto 22 Part SNAP-4A
250 VAC - 4A 5x20 mm
Fast-acting Bell Fuse Part No. BEL 5HF4
Opto 22 Part SNAP-4A
Pickup Voltage
4 V @ 5.5 mA
4 V @ 5.5 mA
Dropout Voltage
1 VDC
1 VDC
Logic Side Ratings
Control Resistance
220 ohms
220 ohms
Logic Supply Voltage
5 VDC ± 0.25 VDC
5 VDC ± 0.25 VDC
Logic Supply Current
50 mA maximum
50 mA maximum
SNAP Digital Output Modules
Current Rating 0°C to 70°C Ambi3 amps per module
ent
Module Ratings
Number of Channels Per Module
4
4
Turn-on Time
100 usec
100 usec
Turn-off Time
750 usec
750 usec
Isolation (Field Side to Logic Side) 4,000 volts (transient)
4,000 volts (transient)
Temperature
0 to 70 °C, operating
-30 to 85 °C, storage
0 to 70 °C, operating
-30 to 85 °C, storage
Agency Approvals
CE, FM, RoHS, DFARS
CE, FM, RoHS, DFARS
Warranty
Lifetime
Lifetime
* The power rating of the dry contact module must not exceed 10 VA under steady state or momentary in-rush conditions. For
voltages at or below 20 volts, the current limit is 0.5 amps. For voltages above 20 volts, the maximum allowable current is
determined by the following equation: 10 VA / Voltage = Current maximum. Rating curve is in the data sheet.
Form 1144-101029
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
PAGE
11
SNAP Digital Output Modules
Specifications—DC Modules (continued)
SNAP-ODC5RFM
Key Feature
SNAP-ODC5R5FM
Factory Mutual approved
Factory Mutual approved
Line Voltage - Range
0–100 VDC
0–130 VAC*
0–100 VDC
0–130 VAC*
Line Voltage - Nominal
--
--
Current Rating 0 °C to 70 °C
Ambient
0.5 amps switching*
0.5 amps switching*
Surge Current
0.5 amps*
0.5 amps*
Minimum Load
0 mA
0 mA
Output Voltage Drop
0 volts
0 volts
SNAP Digital Output Modules
Field Side Ratings (each channel)
Off-state Leakage
0 mA
0 mA
Peak Blocking Voltage
100 VDC / 130 VAC
100 VDC / 130 VAC
Fuse
(Common to all Channels)
Has four isolated channels. User
must provide own fusing.
Has four isolated channels. User
must provide own fusing.
Pickup Voltage
4 V @ 5.5 mA
4 V @ 5.5 mA
Dropout Voltage
1 VDC
1 VDC
Logic Side Ratings
Control Resistance
220 ohms
220 ohms
Logic Supply Voltage
5 VDC ± 0.25 VDC
5 VDC ± 0.25 VDC
Logic Supply Current
50 mA maximum
50 mA maximum
Number of Channels Per Module
4
4
Turn-on Time
500 usec
500 usec
Turn-off Time
500 usec
500 usec
Isolation (Field Side to Logic Side)
1,500 volts (transient)
1,500 volts (transient)
Mechanical Life
200,000,000 cycles
200,000,000 cycles
Temperature
0 to 70 °C, operating
-30 to 85 °C, storage
0 to 70 °C, operating
-30 to 85 °C, storage
Agency Approvals
CE, FM, RoHS, DFARS
CE, FM, RoHS, DFARS
Warranty
30 months or mechanical life, which- 30 months or mechanical life, whichever comes first
ever comes first
Module Ratings
Form 1144-101029
DATA SHEET
* The power rating of the dry contact module must not exceed 10 VA under steady state or momentary in-rush
conditions. For voltages at or below 20 volts, the current limit is 0.5 amps. For voltages above 20 volts, the maximum allowable current is determined by the following equation: 10 VA / Voltage = Current maximum. Rating
curve is in the data sheet.
PAGE
12
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Output Modules
Specifications—DC Modules (continued)
Key Feature
SNAP-ODC5-iFM
SNAP-ODC5A-iFM
Four isolated channels
Factory Mutual approved
Four isolated channels
Factory Mutual approved
Field Side Ratings (each channel)
5–60 VDC
5–200 VDC
Line Voltage - Nominal
5–48 VDC
5–200 VDC
Current Rating 0°C to 70°C
Ambient
3 amps per module
3 amps per module
Surge Current
5 amps peak for 1 second
5 amps peak for 1 second
Minimum Load
20 mA
20 mA
Output Voltage Drop
1.6 volts max.@ 0.75 amps
1.6 volts max.@ 0.75 amps
Off-state Leakage
1 mA @ 60 VDC
1 mA @ 60 VDC
Peak Blocking Voltage
60 VDC
200 VDC
Fuse (Common to all Channels)
Has four isolated channels.
Has four isolated channels.
User must provide own fusing. User must provide own fusing.
Logic Side Ratings
Pickup Voltage
4 V @ 5.5 mA
4 V @ 5.5 mA
Dropout Voltage
1 VDC
1 VDC
Control Resistance
220 ohms
220 ohms
Logic Supply Voltage
5 VDC ± 0.25 VDC
5 VDC ± 0.25 VDC
Logic Supply Current
50 mA maximum
50 mA maximum
Module Ratings
Number of Channels Per Module 4
4
Turn-on Time
100 usec
100 usec
Turn-off Time
750 usec
750 usec
Isolation (Field Side to Logic
Side)
4,000 volts (transient)
4,000 volts (transient)
Temperature
0 ° to 70 °C, operating
-30 ° to 85 °C, storage
0 ° to 70 °C, operating
-30 ° to 85 °C, storage
Agency Approvals
CE, FM, RoHS, DFARS
CE, FM, RoHS, DFARS
Warranty
Lifetime
Lifetime
SNAP Digital Output Modules
Line Voltage - Range
Form 1144-101029
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
PAGE
13
SNAP Digital Output Modules
Schematics
Part Number
Description
SNAP-ODC5SRC
4-channel DC output 5–60 VDC logic source
SNAP-ODC5SRCFM
4-channel DC output 5–60 VDC logic source,
Factory Mutual approved
Form 1144-101029
DATA SHEET
SNAP Digital Output Modules
SNAP-ODC5SRC Output Module—
Sourcing
PAGE
14
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Output Modules
Schematics
SNAP-ODC5SNK and SNAP-ODC5ASNK
Output Modules—Sinking
Part Number
Description
SNAP-ODC5SNK
4-channel DC output 5–60 VDC logic sink
SNAP-ODC5SNKFM
4-channel DC output 5–60 VDC logic sink,
Factory Mutual approved
SNAP-ODC5ASNK
4-channel DC output 5–200 VDC logic sink
SNAP Digital Output Modules
Form 1144-101029
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
PAGE
15
SNAP Digital Output Modules
Schematics
SNAP-ODC5R and SNAP-ODC5R5
Dry Contact Module
VDC
1
Description
SNAP-ODC5R
4-channel dry contact output, normally open
SNAP-ODC5R5
4-channel dry contact output, normally closed
SNAP-ODC5RFM
4-channel dry contact output, normally open,
Factory Mutual approved
SNAP-ODC5R5FM
4-channel dry contact output, normally closed,
Factory Mutual approved
mA
5
500
12
500
24
416
48
206
1001
100
Maximum DC voltage is 100 VDC.
NOTE: Commutating diode* must be used on
inductive loads. Typical wiring examples:
10 VA Rating for Reed Relay (Dry Contact)Modules
Maximum Allowable Peak Current (mA)
SNAP Digital Output Modules
Current Limit at Key Voltages
Part Number
600
500
400
300
200
100
0
0
1
2
3
4
5
6
7
8
9
100
Form 1144-101029
DATA SHEET
Field Voltage
PAGE
16
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Output Modules
Schematics
SNAP-ODC5MA Output Module with
Manual/Auto Switches
Part Number
Description
SNAP-ODC5MA
4-channel isolated DC output 5–60 VDC,
5 VDC logic, with manual/auto switches
SNAP Digital Output Modules
Form 1144-101029
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
PAGE
17
SNAP Digital Output Modules
Schematics
Part Number
Description
SNAP-ODC5-i
4-channel isolated DC output 5–60 VDC, 5 VDC logic
SNAP-ODC5A-i
4-channel isolated DC output 5–200 VDC, 5 VDC logic
SNAP-ODC5-iFM
4-channel isolated DC output 5–60 VDC, 5 VDC logic,
Factory Mutual approved
SNAP-ODC5A-iFM
4-channel isolated DC output 5–200 VDC, 5 VDC
logic, Factory Mutual approved
Form 1144-101029
DATA SHEET
SNAP Digital Output Modules
SNAP-ODC5-i and SNAP-ODC5A-i
Isolated Output Module
PAGE
18
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Output Modules
Dimensional Drawing
All Models Except MA
SNAP Digital Output Modules
Form 1144-101029
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
PAGE
19
SNAP Digital Output Modules
Dimensional Drawing
Form 1144-101029
DATA SHEET
SNAP Digital Output Modules
All MA Models
PAGE
20
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
SNAP Digital Output Modules
Dimensional Drawing
All Models
SNAP Digital Output Modules
IMPORTANT: The mounting rack connector has 24 pins; the
module connector has 20 pins. The extra pins on the mounting
rack connector prevent misalignment of the module during
installation.
Form 1144-101029
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
DATA SHEET
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
PAGE
21
SNAP Digital Output Modules
Dimensional Drawing
All Models
Form 1144-101029
DATA SHEET
SNAP Digital Output Modules
SNAP Digital Module Mounted on SNAP Rack
PAGE
22
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • www.opto22.com
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
More About Opto 22
Products
SNAP PAC Brains
Opto 22 develops and manufactures reliable, flexible, easy-to-use
hardware and software products for industrial automation, remote
monitoring, and data acquisition applications.
SNAP PAC System
Designed to simplify the typically complex process of
understanding, selecting, buying, and applying an automation
system, the SNAP PAC System
consists of four integrated
components:
• SNAP PAC controllers
• PAC Project™ Software Suite
• SNAP PAC brains
• SNAP I/O™
While SNAP PAC controllers provide central control and data
distribution, SNAP PAC brains provide distributed intelligence for
I/O processing and communications. Brains offer analog, digital,
and serial functions, including thermocouple linearization; PID loop
control; and optional high-speed digital counting (up to 20 kHz),
quadrature counting, TPO, and pulse generation and measurement.
SNAP I/O
I/O provides the local connection to sensors and equipment.
Opto 22 SNAP I/O offers 1 to 32 points of reliable I/O per module,
depending on the type of module and your needs. Analog,
digital, serial, and special-purpose modules are all mixed on
the same mounting rack and controlled by the same processor
(SNAP PAC brain or rack-mounted controller).
Quality
SNAP PAC Controllers
Programmable automation controllers
(PACs) are multifunctional, multidomain,
modular controllers based on open standards and
providing an integrated development environment.
Opto 22 has been manufacturing PACs for many years. The latest
models include the standalone SNAP PAC S-series and the rackmounted SNAP PAC R-series. Both handle a wide range of digital,
analog, and serial functions and are equally suited to data
collection, remote monitoring, process control, and discrete and
hybrid manufacturing.
SNAP PACs are based on open Ethernet and Internet Protocol (IP)
standards, so you can build or extend a system without the expense
and limitations of proprietary networks and protocols.
PAC Project Software Suite
Opto 22’s PAC Project Software Suite provides full-featured and
cost-effective control programming, HMI (human machine
interface) development and runtime, OPC server, and database
connectivity software to power your SNAP PAC System.
These fully integrated software applications share a single tagname
database, so the data points you configure in PAC Control™ are
immediately available for use in PAC Display™, OptoOPCServer™,
and OptoDataLink™. Commands are in plain English; variables and
I/O point names are fully descriptive.
PAC Project Basic offers control and HMI tools and is free for
download on our website, www.opto22.com. PAC Project
Professional, available for separate purchase, adds OptoOPCServer,
OptoDataLink, options for Ethernet link redundancy or segmented
networking, and support for legacy Opto 22 serial mistic™ I/O units.
Founded in 1974 and with over 85 million devices sold,
Opto 22 has established a worldwide reputation for highquality products. All are made in the U.S.A. at our
manufacturing facility in Temecula, California. Because we
do no statistical testing and each part is tested twice before leaving
our factory, we can guarantee most solid-state relays and optically
isolated I/O modules for life.
Free Product Support
Opto 22’s Product Support Group offers free, comprehensive
technical support for Opto 22 products. Our staff of support
engineers represents decades of training and experience. Product
support is available in English and Spanish, by phone or email,
Monday through Friday, 7 a.m. to 5 p.m. PST.
Free Customer Training
Hands-on training classes for the SNAP PAC System are offered at
our headquarters in Temecula, California. Each student has his or
her own learning station; classes are limited to nine students.
Registration for the free training class is on a first-come, first-served
basis. See our website, www.opto22.com, for more information or
email training@opto22.com.
Purchasing Opto 22 Products
Opto 22 products are sold directly and through a worldwide
network of distributors, partners, and system integrators. For more
information, contact Opto 22 headquarters at 800-321-6786 or
951-695-3000, or visit our website at www.opto22.com.
www.opto22.com
www.opto22.com • Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Form 1335-090113
SALES 800-321-6786 • 951-695-3000 • FAX 951-695-3095 • sales@opto22.com • SUPPORT 800-835-6786 • 951-695-3080 • FAX 951-695-3017 • support@opto22.com
© 2010 Opto 22. All rights reserved. Dimensions and specifications are subject to change. Brand or product names used herein are trademarks or registered trademarks of their respective companies or organizations.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising