Product Specifications R7PDM   General Specifications

Product Specifications R7PDM   General Specifications
Product Specifications
R7PDM
7­16 DIN Male Low PIM for 1­5/8 in RCT RADIAX® Radiating cable General Specifications
Interface 7­16 DIN Male Body Style Straight Brand RADIAX® Mounting Angle Straight Electrical Specifications
Connector Impedance 50 ohm Operating Frequency Band 0 – 2700 MHz Cable Impedance 50 ohm 3rd Order IMD, typical ­107 dBm @ 910 MHz 3rd Order IMD Test Method Two +43 dBm carriers RF Operating Voltage, maximum (vrms) 1415.00 V dc Test Voltage 4000 V Outer Contact Resistance, maximum 1.50 mOhm Inner Contact Resistance, maximum 0.80 mOhm Insulation Resistance, minimum 5000 MOhm Average Power 3.0 kW @ 900 MHz Peak Power, maximum 40.00 kW Insertion Loss, typical 0.05 dB ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 1 of 3
May 1, 2016
Product Specifications
R7PDM
Outline Drawing
Mechanical Specifications
Outer Contact Attachment Method Clamp Inner Contact Attachment Method Thread­in stub Outer Contact Plating Trimetal Inner Contact Plating Silver Attachment Durability 25 cycles Interface Durability 500 cycles Interface Durability Method IEC 61169­4:9.5 Connector Retention Tensile Force 890 N
Connector Retention Torque 4.52 N­m
|
40.00 in lb Insertion Force 200.17 N
|
45.00 lbf Insertion Force Method IEC 61169­1:15.2.4 Pressurizable No Coupling Nut Proof Torque 24.86 N­m
|
220.00 in lb Coupling Nut Retention Force 1000.85 N
|
225.00 lbf |
200 lbf Coupling Nut Retention Force Method MIL­C­39012C­3.25, 4.6.22 Dimensions
Nominal Size 1­5/8 in Diameter 62.99 mm
Length 107.01 mm
|
Weight 847.47 g
1.87 lb |
|
2.48 in 4.21 in Environmental Specifications
Operating Temperature ­55 °C to +85 °C (­67 °F to +185 °F) Storage Temperature ­55 °C to +85 °C (­67 °F to +185 °F) ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 2 of 3
May 1, 2016
Product Specifications
R7PDM
Mechanical Shock Test Method MIL­STD­202F, Method 213B, Test Condition C Thermal Shock Test Method MIL­STD­202F, Method 107G, Test Condition A­1, Low Temperature ­55 °C Corrosion Test Method MIL­STD­1344A, Method 1001.1, Test Condition A Standard Conditions
Attenuation, Ambient Temperature 20 °C
|
68 °F Average Power, Ambient Temperature 40 °C
|
104 °F Return Loss/VSWR
Frequency Band
50–1000 MHz
1010–2000 MHz
2010–2400 MHz
VSWR
1.03
1.07
1.08
Return Loss (dB)
36.00
30.00
28.00
Regulatory Compliance/Certifications
Agency
RoHS 2011/65/EU
China RoHS SJ/T 11364­2006
ISO 9001:2008
Classification
Compliant by Exemption
Above Maximum Concentration Value (MCV)
Designed, manufactured and/or distributed under this quality management system
* Footnotes
Insertion Loss, typical 0.05v¯freq (GHz) (not applicable for elliptical waveguide) ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope.
All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 3 of 3
May 1, 2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising