Wire Strippers Features:
Wire Strippers
608-369A-F, 608-369B-F and 608-369C-F
Features:
• Stripping tools with precision blades strips teflon, PVC, silicone.
• The tools are made of aluminium with plastic coated handle.
Specifications:
608-369A-F:
Diameter of cutting blade : 0.5, 1.2, 1.6, 2.0mm.
608-369B-F:
Diameter of cutting blade : 1.0, 1.6, 2.0, 2.6, 3.2mm.
608-369C-F:
Diameter of cutting blade : 22, 16, 14, 12, 10, 8AWG.
808-080-F
Features:
• A versatile wire stripper of sturdy construction capable of cutting and
stripping flexible cable from 0.2 to 6mm without any adjustment.
• Blade pressure can be adjusted for external sheaths of 3 core cables.
• Also feature a cable cutter.
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Page <1>
18/04/09 V1.0
Wire Strippers
808-080-F
Dimensions : Millimetres
Features:
8PK-033-F
• Suitable for crimping 1.5 to 6mm (red, blue and yellow) insulated
terminals.
• Also used in the tool is a wire cutter, wire stripper, bolt cutter and
position for crimping ignition terminals.
8PK-033-F
Part Number Table
Description
Part Number
Wire Stripper, 0.5 to 2mm
608-369A-F
Wire Stripper, 1 to 3.2mm
608-369B-F
Wire Stripper, 8 to 22AWG
608-369C-F
Wire Stripper, 0.2 to 6mm
808-080-F
Crimp Tool/Wire Stripper
8PK-033-F
Disclaimer This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes
in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied.
The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data
sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage
resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded.
This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. DURATOOL is the registered trademark of the Group. © Premier Farnell plc 2009.
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Page <2>
18/04/09 V1.0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising