Phonak ComPilot and Bluetooth pairing guide LG

Phonak ComPilot and Bluetooth pairing guide LG
Phonak ComPilot and LG
Bluetooth pairing guide
1. Charge and turn on the mobile phone and ComPilot.
2. Place them next to each other.
audi
au
audio
udi
ddio
io
power
au
audio
uddi
udi
dio
io
power
3. Prepare ComPilot for pairing
Press and hold the Connect
and Volume
buttons simultaneously
for 2 seconds until the Audio indicator starts to rapidly blink blue.
■ Start the pairing process on the phone as described below.
■ Please consult your phone‘s user guide if you need more information.
■
2 sec
4. Prepare the mobile phone for pairing
Find the connectivity settings of the phone. With most models, the following navigation applies.
The Bold terms might be different depending on the exact phone model.
■
■
■
■
■
■
■
Select Menu > Tools > Connectivity 
Bluetooth > Settings
Ensure Bluetooth is turned On
Select Done > Paired devices > Add
Wait until Phonak ComPilot is found
Highlight the ComPilot in the list then OK
Enter the PIN code 0000 (4 zeros)
Select OK
Pairing smartphone models
(touchscreen)
■
■
■
■
■
■
■
■
Press the Menu key
Touch Settings > Wireless controls
Ensure Bluetooth is turned On
Touch Bluetooth settings
Wait until Phonak ComPilot is found
Select the Phonak ComPilot in the list of
devices
Enter the PIN code 0000 (4 zeros)
Select OK
5. End of pairing
■ After
successful pairing, the ComPilot Audio indicator will stop rapid flashing blue.
■ Additionally a headset symbol
may appear on the main screen of your phone.
■ After 2 minutes the ComPilot will automatically exit from pairing mode. If step 4 was not
completed before, simply start the pairing mode on ComPilot again as described in step 3.
V1.00/2011-09/rz © Phonak AG All rights reserved
Pairing older models
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising