Directional Controls Wet Armature, Pilot Operated Solenoid Controlled, Directional Valve Vickers

Directional Controls Wet Armature, Pilot Operated Solenoid Controlled, Directional Valve Vickers
Service Data
Vickers®
Directional Controls
Wet Armature, Pilot Operated
Solenoid Controlled, Directional Valve
DG5S4-10*A*W(3)-*-53
DG5S4-10*B*W(3)-*-53
Revised 11/01/85
DG5S4-10*C*W(3)-*-53
DG5S4-10*N*W(3)-*-53
I-3627-S
Plug Installation Table
Model
Plug A” Plug B”
30560
DG5S4-10**Does
7074
DG5S4-10**-E
Not
Out
DG5S4-10**-X
Exist
DG5S4-10**-X-E
DG5S4-10**-K/L/R/S
161809
DG5S4-10**-E-K/L/R/S
113000
7074
DG5S4-10**-X-K/L/R/S
Out
DG5S4-10**-X-E-K/L/R/S
113000
Valve Model Code
Valve
Model
Type
DG5S4-100- A/B/C/N
B/C
DG5S4-101DG5S4-102- A/B/C/N
DG5S4-103B/C
DG5S4-104DG5S4-106- A/B/C/N
DG5S4-108B/C
DG5S4-109- A/B/C/N
DG5S4-1031B/C
DG5S4-1033- A/B/C/N
Spool
364037
*331404
364038
*277479
281193
364039
364041
277563
*277479
364042
J Plug Torques (Oiled)
Plug
N.m
lb. in.
75-85
8.5-9.6
7074
180-205
20.0-23.0
7075
75-85
8.5-9.6
30560
45-52
5.0-5.9
113000
45-52
5.0-5.9
161809
90-105
10.0-11.8
343740
150-160
16.9-18.0
363889
30-35
3.4-4.0
407533
Plug C”
Out
30560
Out
30560
Out
Main Stage ID Plate
W/Circuit Diagram
A
B, C, N
400975
400976
400977
400975
400978
400979
400980
400975
400981
400980
400975
400976
580475
400975
400981
Model
Pilot Attaching Parts
Bolt
(4 req’d)
W/Out Pilot Choke
W/Pilot Choke
(See back page)
j 1034
j 10938
L’Washer
(4 req’d)
jj 68907
Torque to 11.3 - 12.65 N.m (100-112 lb. in.)
*Assemble type 1” and 3” spools with narrow center land
toward A” end of valve. A” end is defined as being closest to
cylinder port A”. The type 31” spool is installed in reverse of
type 3”, with narrow center land toward B” end.
Remove on spring
offset models only
107758 Washer
280931 Spring
Spool (See table)
Z 298168 Screw
(4 req’d)
Torque 203.4-230.5 N.m
(150-170 lb. ft.)
276948 Cover
Y 262409 O-Ring
Note
Refer to Parts Drawing I-3487-S
for models with Plug-in Features.
∆Y Included in F3 Seal Kit 920213
Z Included in Fastener Kit 941262
V Included in Bolt Kit 255633
V Included in Bolt Kit 255654
L Included in Plug Kit 941263
J Plug Torques (See table)
z Not available for sale
Used in Check Valve models only
 Eaton Hydraulics, Incorporated 2000
All Rights Reserved
Note
SAE straight thread plugs used
on exterior of valve.
Note
Parts included in serivce kits will
not be sold separately.
Seal Kit Note
The -53 design valves are manufactured as shown with F3 seals used
internally. Interface seals are standard
Nitrile material and are converted to
F3 in the seal kit. All seals in the Seal
Kit are F3.
Valve Model
Main Stage Spool
Pilot Valve Model
DG5S4-10*A-W-*-53
0, 2, 6, 9, 33
DG4S4-012A-W-*-50
0, 1, 2, 3, 6
DG4S4-016B-W-*-50
9, 31, 33
DG5S4-10*B-W-*-53
4&8
DG4S4-0168B-W-*-50
0, 1, 2, 3, 6
DG4S4-016C-W-*-50
9, 31, 33
DG5S4-10*C-W-*-53
DG4S4-0168C-W-*-50
4&8
DG4S4-012N-W-*-51
0, 2, 6, 9, 33
DG5S4-10*N-W-*-53
Nameplate
(Ref.)
Pilot Valve Exploded View Shown on:
I-3557-S
I-3558-S
I-3559-S
174638 Screw
(4 req’d) (Ref.)
Torque to 0.8-1.0 N.m
(7-9 lb. in.)
This solenoid
removed on A”
& B” models
(right hand)
Pilot Attaching Bolts (See table)
JL 7074 Plug (Remove for Internal
Pilot Drain T” in Model)
Y 263473 O-Ring
JL 407533 Plug
I.D. Plate W/Circuit
Diagram (See table)
416834 Rivet
(4 req’d)
Y 199811 O-Ring (5 req’d) (Ref.)
(Nitrile)
JL 363889 Plug
Y 263495 O-Ring
JL 407533 Plug
Y 263493 O-Ring
Y 263493 O-Ring
(2 req’d)
Z298168 Screw (4 req’d)
Torque to 203.4230.5 N.m
(150-170 lb. ft.)
JL 407533
Plug
(2 req’d)
Y 263493
O-Ring
Y 262409
O-Ring
JL
407533
Plug
280931 Spring
107758 Washer
z 400959 Body
(Std.)
Y”
X”
JL B” Plug (See table)
Y 263495 O-Ring
JL 363889 Plug
195940 Rest Pin (2 req’d)
Y154014 O-Ring (Nitrile)
s 154014 O-Ring
(Nitrile)
Y 263493 O-Ring
JL 407533
Plug
Y 263494 O-Ring
s 263493
O-Ring
JL A” Plug
(See table)
245802 Sleeve
(Press in place)
Spring (See table)
Spring
247287
247288
276428
432353
Remove on
Spring Offset
Models only
Y 263493 O-Ring (2 req’d)
JL 407533 Plug
z 435503 Body
(Check valve)
JL C” Plug
(See table)
Model
DG5S4-10**-K
DG5S4-10**-L
DG5S4-10**-R
DG5S4-10**-S
276948 Cover
JL 407533 Plug
P” Port
6422
Poppet
Y154026 ”O” Ring (3 req’d)
(Check valve models)
(4 req’d std models) (Nitrile)
(A, B, P, & T Ports)
289102 Seat
Y154078
O-Ring (Nitrile)
JL 343740 Plug
Model Code
1
1
2
3
4
Seal Material
F3 - Seals for mineral oil and fire
resistant fluids (Viton seals)
2
Electrical Feature Plug
5
7
ABCN-
6
7
8
9
10
11
8
Model Series
DG3S4 - Directional valve, subplate
or manifold mounted, solenoid
controlled, pilot operated,
sliding spool, flow
directions 4 - 4 way
Spring offset
Spring centered (one solenoid)
Spring centered
No spring detented
4
Solenoid Indicator Lights
L - Light
Omitted - None
5
Series
6
Spool Type
Spool Control Modifications
(Omit if not required)
1 - Stroke adjustments
2 - Pilot choke adjustments
3 - Pilot choke & stroke adjs.
7 - Stroke adj. A” end only
8 - Stroke adj. B” end only
14
15
16
Pilot Drain
TInternal
Omitted - External
12
Check Valve
K - 5 PSI (0.35 bar) cracking press.
L - 35 PSI (2.14 bar) cracking press.
R - 50 PSI (3.45 bar) cracking press.
S - 75 PSI (5.2 bar) cracking press.
Omitted - No check valve
13
Wet Armature Type
W - Non-serviceable core tube in pilot
W3 - Serviceable core tube in pilot
check valve
14
Coil Identification Letter
External Pilot Pressure
15
Design
Omitted - Internal pilot pressure
16
Left Hand Assembly
10
10 - 100 (1.250 inch)
Response
X” - Fast response model
Omitted - Low shock model
9
13
11
Valve Type
(See note below)
3
12
Stroke Adjustment Parts
Models with pilot choke
DGMFN-5-Y-AW-BW-20
587607 Nut (2 req’d)
591534 Adj. screw (2 req’d)
575035 Plate (2 req’d) (Bond to plug)
575025 Plug (2 req’d)
Torque 81.30-94.90 N.m (60-70 lb. ft.)
248868 Rollpin
(2 req’d)
263498 O-Ring (2 req’d)
575026 Stop (2 req’d)
262330 O-Ring (2 req’d)
575028 Throttle (2 req’d)
575031 Spring (2 req’d)
36212 Rivet (2 req’d)
630318 Diagram Plate
Body
(Not
available
for sale)
Y 262334 O-Ring (5 req’d)
407533 Plug (4 req’d)
Torque to 3.4-4.0 N.m
(30-35 lb. in.)
Y 263493 O-Ring (4 req’d)
Y Included in 920246 Seal Kit
107758 Washer
Y 262409 O-Ring
280931 Spring
Y 262332 O-Ring
333327 Piston
289451 Cover
1493 Nut
334157 Adj. Screw
Electrical Plug Feature (Omit if not required)
PA - Insta-Plug, Male Receptacle only
PA3 (3 Pin) & PA5 (5 PIN) receptacles that meet NFPA Hydraulic Valve
PB - Insta-Plug, Male & Female Receptacle
Electrical Standard T3.5.29M-1980.
For satisfactory service life of these components use full flow filtration to provide fluid which meets ISO cleanliness code
20/18/15 or cleaner. Selections from Eaton OFP, OFR, and OFRS series are recommended.
Printed in U.S.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertising