Dwyer | Model DW-USB-1-HT | Instruction manual | Series DW-USB-1-HT High Temperature USB Data Logger Specifications and Operating Instructions DLR-DW-USB-1-HT

Series DW-USB-1-HT High Temperature USB Data Logger Specifications and Operating Instructions DLR-DW-USB-1-HT
DLR-DW-USB-1-HT
Series DW-USB-1-HT High Temperature USB Data Logger
ONLY USE SPECIFIED BATTERY
DW-USB-1-HT
4-3/8
[111.13]
HIGH TEMPERATURE DATA LOGGER
RANGE: -40 TO 125°C (-40 TO 257°F)
Specifications and Operating Instructions
Ø25/32
[19.84]
Model DW-USB-1-HT High Temperature USB Data Logger allows
users to monitor temperatures up to 257°F (125°C). The rigid, stainless
steel enclosure protects the sensor against corrosion, impact, and water
ingress. With the easy to install Windows® based software, parameters
can be configured to work in many applications. Data can be
downloaded by plugging the data logger directly into a PC’s USB port,
with no cable required. Downloaded data can then be graphed, printed,
or exported to other spreadsheet applications.
OPERATING INSTRUCTIONS
Battery Installation
Before using the data logger, you will need to insert the 3.6 V 2/3 AA high
temperature battery provided, following the instructions below:
1. Use a coin to turn the battery cover counter-clockwise.
SPECIFICATIONS
Temperature Range: -40 to 257°F (-40 to 125°C).
Temperature Accuracy: ±1°F (±0.5°C).
Temperature Resolution: 0.2°F (0.1°C).
Memory Size: 32,510 readings.
Sampling Mode: Continuous or stop on memory full.
Sampling Rate: Selectable from 1 sec to 12 hours.
Computer Requirements: Windows® 2000, Windows® XP, Windows
Vista®, and Windows® 7; 32 or 64-bit operating systems.
Power Requirements: 3.6 V 2/3 AA lithium battery (included).
Battery Life: Approximately 1 to 3 years.
Housing: 316 SS.
Enclosure Rating: IP67/NEMA 4X.
Alarms: Programmable high/low.
Interface: USB port.
Weight: 4.6 oz (130.4 g).
Agency Approvals: CE, RoHS.
2. Remove the battery cover.
3. Insert battery, taking notice of the indicated polarities.
4. Replace battery cover. Use a coin to turn the cover clockwise until
securely tightened.
Windows® and Windows Vista® are registered trademarks of Microsoft Corporation.
DWYER INSTRUMENTS, INC.
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A.
Phone: 219/879-8000
Fax: 219/872-9057
www.dwyer-inst.com
e-mail: info@dwyermail.com
NOTICE
Dispose of used batteries promptly and keep away from
children.
SOFTWARE INSTALLATION
NOTICE
Windows® 2000, Windows® XP, Windows Vista®, Windows® 7,
32/64-bit operating system is required for software installation.
Stopping Data Logger and Download data
1. When finished taking data, remove the USB cover, plug the device into
the computer, and click the “stop the USB Data Logger and download
data” button.
1. Visit our website www.dwyer-inst.com/DW-USBSoftware and click
on the download link. If the installation folder doesn’t open directly,
go to your computer’s “Downloads” folder and double-click on the
“EasyLogUSBV610_Dwyer” folder.
2. Double-click on “setup” then follow the on screen instructions to
complete software installation.
Data Logger Setup
The previously installed software can be used to setup the data logger.
Use the options tab to begin logging, download data from a running log, or
view previously saved data. The status of the attached data logger can
also be checked.
Exporting Data
1. Open the saved data by pressing “view previously saved data”.
1. Ensure the battery is correctly installed.
2. Insert the data logger into an available USB port on your computer.
3. Double click the “EasyLog USB” icon on your desktop.
2. Select the data file you wish to export.
3. After the graph of the data opens in a separate window, click export.
4. Excel will open with a tab of the graph and a tab of the data.
Setup/Starting Data Logger
1. To configure the device and begin logging, click the “set up and start the
USB Data Logger” button. Follow the on screen instructions.
MAINTENANCE/REPAIR
Upon final installation of the Series DW-USB-1-HT, no routine maintenance
is required. The Series DW-USB-1-HT, is not field serviceable and should
be returned if repair is needed. Field repair should not be attempted and
may void warranty.
WARRANTY/RETURN
Refer to “Terms and Conditions of Sales” in our catalog and on our website.
Contact customer service to receive a Return Goods Authorization number
before shipping the product back for repair. Be sure to include a brief
description of the problem plus any additional application notes.
2. Assign the data logger a name.
3. Select the appropriate input type and engineering units.
4. Set up the sampling rate.
NOTICE
Faster sampling rates will yield a shorter battery life.
5. Set up alarm values.
6. Select desired date for the date you want the logger to start logging.
7. Click finish.
8. Once the device is configured and you have started logging, remove the
device from the computer and place the USB cap back on. The device
is now ready to be used.
©Copyright 2014 Dwyer Instruments, Inc.
Printed in U.S.A. 4/14
DWYER INSTRUMENTS, INC.
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A.
Phone: 219/879-8000
Fax: 219/872-9057
FR# R7-443584-10 Rev. 2
www.dwyer-inst.com
e-mail: info@dwyermail.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising