HUB7i QuickStart HUB7i
HUB7i QuickStart
HUB7i
The HUB7i is an optically isolated 7-port USB hub
that protects the host computer from voltages up
to 5500 VAC, with optional medical-grade power
supply. The hub is powered by an industrial grade
wall-mount power supply providing a full 500mA
to each attached USB peripheral. Status LEDs on
the HUB7i indicate external power, connection to
the host, and fault conditions. The hub is housed
in a rugged plastic enclosure and is USB 1.1
compliant and USB 2.0 compatible.
Installation
What’s Included
Windows 98/ME/2000/XP/Vista™ Operating Systems
The HUB7i is shipped with the following items. If any
of these items is missing or damaged please contact
Sealevel for replacement.
1. The HUB7i is fully supported as a generic USB
hub device in Windows 98/ME/2000/XP/Vista™
operating systems and requires no separate driver.
The Sealevel Software CD is included only for
distribution of the user manual and other literature.
2. Simply connect the included wall-mount power
supply to the HUB7i and connect to an AC outlet.
3. Using the included SeaLATCH USB device cable, plug
the HUB7i into an available USB port on your host
system.
4. The ‘Found New Hardware’ screen will appear and
the hub will be automatically recognized as a generic
USB hub device.
5. The hub is ready to use when you see the screen
‘Your USB hub is installed and ready to use.’
Linux Support
USB devices are supported in Linux kernel v2.4 or
better. Refer to the help files included with your Linux
distribution for specific instructions on adding generic
USB hub devices.




HUB7i – Sealevel 7-Port Isolated USB Hub
CA179 – 72” USB ‘A’ to ‘B’ Device Cable
TR124 – 5VDC @ 4A Wall-Mount Power Supply
Sealevel Software CD – Manual Only
Optional Items
 Item# TR122 – 5VDC @ 5A Wall-Mount Power
Supply. For medical and other specialized
applications, this medical grade power supply
increases the isolation to 5500 VAC, providing the
highest level of protection in the industry.
 Item# CA214 – USB Type A to USB Type A, 3
Meter Extension Cable. The CA214 has a type A
male connector on one end and a type A female
connector on the other end.
 Item# CA215 – USB Type A to USB Type B, 5 Meter
Device Cable. The CA215 connects USB peripherals
with a type B connector to the type A connector on
a host PC.
Customer Support
Sales Support: sales@sealevel.com
Technical Support: support@sealevel.com
Or call us at (864) 843-4343
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising