::kitchencarts.com Call 1-800-667-8721 anywhere in the US and Canada - www.kitchencarts.com STAINLESS STEEL FLAT TOP with BULL NOSE EDGE CHEF TABLES Item #: Qty #: Model #: Project #: Rolled Rim Edge on Front & Square Side Edges Rolled Rim Edges on All Four Sides Model Above Shown with Under Shelf Rear Bar Model Shown FEATURES: MATERIAL: Top is furnished with 1-5/8” sanitary rolled rim edges on four sides. To reinforce and maintain a level working surface, 24” wide tables are supplied with TWO hat channels and 30” wide tables are supplied with THREE hat channels. Rear Bar Models have front to back leg braces bolted to legs and requires assembly. Rear bar is welded to legs. Center Bar Models have front to back Leg braces welded to legs. Center bar bolts to legs and requires assembly. Under Shelf Models have aluminum die cast “leg-to-shelf” clamp to secure shelf to leg eliminating unsightly nuts & bolts. Shelf can be adjusted to desired height. Under shelf is adjustable. TOP: 16 gauge stainless steel type “304” series. MODELS WITH REAR OR CENTER CROSS BARS: 1 5/8” dia. tubular stainless steel bars. MODELS WITH UNDER SHELF: 18 gauge stainless steel under shelf. LEGS: 1 5/8” diameter tubular stainless steel. 1” adjustable stainless steel bullet feet. Stainless steel gussets. CONSTRUCTION: All TIG welded. Exposed weld areas polished to match adjacent surfaces. Entire top mechanically polished to a satin finish. Top is sound deadened. Roll formed embossed galvanized hat channels are secured to top by means of structural adhesive and weld studs. Gussets welded to support hat sections. Under Shelf Models Feature “THE PROVEN” ORIGINAL ADVANCE TABCO Adjustable Undershelf with Die Cast Leg Clamp Under Shelf Models 48” 60” 72” Rear Bar Models 24” 30” Wide Wide SN-ISW1913 SN-ISW1916 SN-ISW1914 SN-ISW1917 SN-ISW1915 SN-ISW1918 L Cross & Rear Bar Models Feature 1-5/8” Leg Brace to Ensure Stability L 48” 60” 72” 24” 30” Wide Wide SN-ISW1919RB SN-ISW1922RB SN-ISW1920RB SN-ISW1923RB SN-ISW1921RB SN-ISW1924RB CENTER BAR MODELS AVAILABLE! Accessories Model SN-ISW1961 Stainless Steel Casters SN-ISW1961 SN-ISW1962 Description Set of Four - 5” Stainless Steel Commercial Casters (2 with Brakes) 20” x 20” x 5” Stainless Steel Drawer (Table will Include Factory Installed Brackets. Drawer Installation Required) Stainless Craft at ::kitchencarts.com powered by ::kitchensource.com SN-ISW1962 Stainless Steel Drawer ::kitchencarts.com Call 1-800-667-8721 anywhere in the US and Canada - www.kitchencarts.com DIMENSIONS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL TOL ± .500” All Units Shipped Unassembled (KD) for Reduced Shipping Costs. UNDER SHELF MODELS L Rolled Rim Edge on Front & Square Side Edges 48” 60” 72” 24” Wide SN-ISW1913 SN-ISW1914 SN-ISW1915 Wt. 79 lbs. 92 lbs. 109 lbs. 30” Wide SN-ISW1916 SN-ISW1917 SN-ISW1918 Wt. 89 lbs. 107 lbs. 125 lbs. REAR BAR MODELS L 48” 60” 72” 24” Wide SN-ISW1919RB SN-ISW1920RB SN-ISW1921RB CENTER BAR MODELS AVAILABLE! Stainless Craft at ::kitchencarts.com powered by ::kitchensource.com Wt. 64 lbs. 74 lbs. 85 lbs. 30” Wide SN-ISW1922RB SN-ISW1923RB SN-ISW1924RB Wt. 72 lbs. 85 lbs. 93 lbs.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project