#1455 User's Guide

#1455 User's Guide
Peppa Pig - #1455
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-TEC-TOYS or 1-800-832-8697
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
She loves hugs!
Activate your capability switch and Peppa oinks, giggles and says fun
phrases like “I love hugs”. Can be used with and without a capability
switch. Has on/off switch and comes with a stand for easy play. Great
for teaching cause and effect, language development and auditory
stimulation. Size: 9"L x 5"W x 11"H. Requires 3 AA Batteries.
Weight: 1 lb.
5. Actuate your external capability switch or squeeze Peppa Pig’
tummy and she will oinks, giggles and says fun phrases like “I love
hugs”. When you are finished using Pepper Pig we recommend
turning the ON/OFF switch to OFF to prevent false activation and
battery drain.
1. Peppa Pig requires 3 AA batteries (Not included) to operate. Use
alkaline batteries only (e.g. Duracell or Energizer brand). Do not
use rechargeable batteries or any other type of batteries because
they supply lower voltage and the unit will not perform properly.
Never mix old and new batteries together or different brands or
types together.
2. The battery compartment is located in the back of the plush doll.
Open the Velcro flap, then using a Phillips head screwdriver open
and remove the batter cover. Next install 3 AA batteries paying
close attention to proper battery polarity. Replace battery cover
and screw, next set the ON/OFF switch to ON.
3. We have included a Velcro attached removable stand to use with
Peppa Pig so that you can sit her up when using a switch. There is
Velcro on the back of Peppa Pig to hold her in place on the stand.
There is also a cutout at the base of the stand to put her switch
cable through.
4. Connect Peppa Pig to any external capability switch (not included)
via the jack located at the end of her cord. Pepper Pig is equipped
with a 1/8" jack for use with external capability switches with a
1/8" plug. Make sure you have pushed the switch plug all the way
in. There should be no gaps.
Problem: Peppa Pig does not function correctly.
Action #1: Replace the batteries paying close attention to proper
battery polarity.
Action #2: Make sure that the connection between the external
capability switch is pushed in all the way. There should be NO gaps.
Action #3: Try your switch with another switch operated toy/device in
an effort to rule out your switch as the source of the problems.
Care of Unit:
If you will not be using Peppa Pig for an extended amount of time, we
recommend removing the batteries.
Do not submerge the unit in water, as it will damage the electrical
components. Peppa Pig is surface washable only.
Rev 6/16/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF