datasheet for DFLS130 by Diodes Inc.
DFLS130
1.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
PowerDI®123
Mechanical Data
Features
•
•
•
•
•
•
•
•
•
Guard Ring Die Construction for Transient Protection
Low Power Loss, High Efficiency
High Surge Capability
High Current Capability and Low Forward Voltage Drop
Lead Free Finish, RoHS Compliant (Note 5)
"Green" Molding Compound (No Br, Sb)
Qualified to AEC-Q101 Standards for High Reliability
®
Case: PowerDI 123
Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020D
Terminal Connections: Cathode Band
Terminals: Finish – Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208
Marking Information: See Page 2
Ordering Information: See Page 2
Weight: 0.01 grams (approximate)
•
•
•
•
•
•
Top View
Maximum Ratings
@TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Forward Current
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave Superimposed on Rated Load
Symbol
VRRM
VRWM
VR
VR(RMS)
IF(AV)
Value
Unit
30
V
21
1.0
V
A
IFSM
35
A
Thermal Characteristics
Characteristic
Power Dissipation (Note 1)
Power Dissipation (Note 2)
Thermal Resistance Junction to Ambient (Note 1)
Thermal Resistance Junction to Ambient (Note 2)
Thermal Resistance Junction to Soldering (Note 3)
Electrical Characteristics
Characteristic
Reverse Breakdown Voltage (Note 4)
Symbol
PD
PD
RθJA
RθJA
RθJS
Symbol
V(BR)R
VF
Leakage Current (Note 4)
Total Capacitance
IR
CT
1.
2.
3.
4.
5.
Max
1.67
556
60
180
10
Unit
W
mW
°C/W
°C/W
°C/W
@TA = 25°C unless otherwise specified
Forward Voltage (Note 4)
Notes:
Typ
⎯
⎯
⎯
⎯
⎯
Min
30
⎯
⎯
⎯
⎯
⎯
Typ
⎯
0.25
0.33
0.36
0.15
40
Max
⎯
⎯
0.37
0.42
1.0
⎯
Unit
V
V
mA
pF
Test Condition
IR = 1.5mA
IF = 0.1A
IF = 0.7A
IF = 1.0A
VR = 30V, TA = 25°C
VR = 10V, f = 1.0MHz
Part mounted on 50.8mm X 50.8mm GETEK board with 25.4mm X 25.4mm copper pad, 25% anode, 75% cathode.
Part mounted on FR-4 board with 1.8mm X 2.5mm cathode and 1.8mm X 1.2mm anode, 1 oz. copper pads.
Theoretical RθJS calculated from the top center of the die straight down to the PCB cathode tab solder junction.
Short duration pulse test used to minimize self-heating effect.
EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.
PowerDI is a registered trademark of Diodes Incorporated.
DFLS130
Document number: DS30445 Rev. 4 - 2
1 of 3
www.diodes.com
June 2008
© Diodes Incorporated
IF, INSTANTANEOUS FORWARD CURRENT (A)
DFLS130
10,000
10
1,000
1
100
TA = 125°C
0.1
10
TA = 100°C
1
TA = 85°C
0.01
TA = 25°C
.1
T A = -40°C
0.001
0.2
0
0.4
0.6
0.8
1.0
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 1 Typical Forward Characteristics
IFSM, PEAK FORWARD SURGE CURRENT (A)
CT, TOTAL CAPACITANCE (pF)
1,000
100
10
1
0
25
20
15
10
5
8.3ms Single Half Sine-Wave
0
100
10
NUMBER OF CYCLES AT 60 Hz
Fig. 4 Maximum Non-Repetitive Peak Forward Surge Current
1
5
10
20
15
VR, DC REVERSE VOLTAGE (V)
Fig. 3 Total Capacitance vs. Reverse Voltage
Ordering Information
(Note 6)
Part Number
DFLS130-7
Notes:
.01
25
30
10
20
15
5
VR, INSTANTANEOUS REVERSE VOLTAGE (V)
Fig. 2 Typical Reverse Characteristics
Case
®
PowerDI 123
Packaging
3000/Tape & Reel
6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
YM
Marking Information
F01
F01 = Product Type Marking Code
YM = Date Code Marking
Y = Year (ex: T = 2006)
M = Month (ex: 9 = September)
Date Code Key
Year
2006
2007
2008
2009
2010
2011
2012
Code
T
U
V
W
X
Y
Z
Month
Code
Jan
1
Feb
2
Mar
3
Apr
4
May
5
Jun
6
Jul
7
Aug
8
Sep
9
Oct
O
Nov
N
Dec
D
PowerDI is a registered trademark of Diodes Incorporated.
DFLS130
Document number: DS30445 Rev. 4 - 2
2 of 3
www.diodes.com
June 2008
© Diodes Incorporated
DFLS130
Package Outline Dimensions
B
C
®
PowerDI 123
Dim Min Max Typ
A 3.50 3.90 3.70
B 2.60 3.00 2.80
C 1.63 1.93 1.78
D 0.93 1.00 0.98
E
0.85 1.25 1.00
H 0.15 0.25 0.20
L
0.55 0.75 0.65
L1 1.80 2.20 2.00
L2 0.95 1.25 1.10
All Dimensions in mm
E
D
H
L
L1
E
L2
A
Suggested Pad Layout
X
Y2
G
X1
Y1
Dimensions
G
X1
X2
Y1
Y2
Value (in mm)
1.0
2.2
0.9
1.4
1.4
IMPORTANT NOTICE
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product
described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall
assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website,
harmless against all damages.
LIFE SUPPORT
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written
approval of the President of Diodes Incorporated.
PowerDI is a registered trademark of Diodes Incorporated.
DFLS130
Document number: DS30445 Rev. 4 - 2
3 of 3
www.diodes.com
June 2008
© Diodes Incorporated
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement