PCI-1602UP PCI-1604UP
PCI-1602UP
PCI-1604UP
2-port RS-422/485 Low-Profile Universal PCI
Communication Card with Isolation Protection
2-port RS-232 Low-Profile Universal PCI
Communication Card with Isolation Protection
Features
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCI-1602UP
PCI-1604UP
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
PCI bus 2.2 compliant
Speeds up to 921.6 kbps
2-port RS-422/485 (PCI-1602UP); 2-port RS-232 (PCI-1604UP)
I/O address automatically assigned by PCI Plug & Play
OS support: Windows 2000/XP/Vista/7, Windows CE 5.0/6.0, Linux
2,500 VDC EFT Protection
2,500 VDC Isolation protection for RS-422/485 (PCI-1602UP) or RS-232
(PCI-1604UP)
Interrupt status register for increased performance
Space reserved for termination resistors (PCI-1602UP)
Automatic RS-485 data flow control (PCI-1602UP)
Powerful and easy-to-use utility (ICOM Tools)
Universal and low-profile PCI (Supports 3.3 V or 5 V PCI bus signal)
RoHS
COMPLIANT
2002/95/EC
Introduction
These RS-232/422/485 PCI communication cards are compatible with the PCI 2.2 bus specification for universal connectivity and low-profile PCI cards. The PCI-1604UP provides
two independent RS-232 ports, while the PCI-1602UP has two RS-422/485 ports. To improve system performance, all cards allow transmission rates up to 921.6 kbps. To increase
reliability, the cards offer EFT protection, protecting your system from abrupt high voltages up to 2,500 VDC. High-performance OXuPC1952 and OXuPC1954 UARTs with 128-byte
FIFO, reduces the CPU load, making the cards especially suitable for multitasking environments.
The cards follow the Low Profile PCI MD1 standard. This standard has the same protocol and electronic definition as standard PCI, but the low-profile PCI standard is smaller. Thus,
the cards are suitable for embedded systems, and size-constrained environments. Moreover, all cards are equipped with an universal PCI connector, which allows support for traditional
systems with 5 V signaling or newer systems with 3.3 V signaling.
Specifications
General
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Bus Type
Certification
Connectors
Dimensions (L x W)
Power Consumption
Software
Universal PCI V 2.2
CE, FCC class A
1 x Female DB25
119.91 x 64.41 mm (4.7" x 2.5") (low-profile MD1)
5 V @ 400 mA (Max.)
Communications
ƒƒ Communication
Controller
ƒƒ Data Bits
ƒƒ Data Signals
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
FIFO
Flow Control
IRQ
Parity
Speed
Stop Bits
OXuPC1952
5, 6, 7, 8
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI,
GND
RS-422: Tx+, Tx-, Rx+, Rx-, RTS+, RTS-, CTS+, CTS-,
GND
RS-485: Data+, Data-, GND
128 bytes
CTS/RTS, Xon/Xoff
Assigned by Plug & Play
None, Even, Odd, Mark and Space
50 bps ~ 921.6 kbps
1, 1.5, 2
ƒƒ Bundled Software
ƒƒ OS Support
ICOM Tools
Windows 2000/XP/Vista/7, Windows CE 5.0/6.0,
Linux, and QNX
Environment
ƒƒ Operating Humidity
5 ~ 95 % RH, non-condensing
ƒƒ Operating Temperature 0 ~ 65°C (32 ~ 149°F)
ƒƒ Storage Temperature -25 ~ 85°C (-13 ~ 185°F)
Ordering Information
ƒƒ PCI-1602UP
ƒƒ PCI-1604UP
2-port RS-422/485 Low-Profile Uni PCI Comm Card
w/Iso
2-port RS-232 Low-Profile Uni PCI Comm Card w/Iso
Note: PCI-1602UP and PCI-1604UP include one DB25 to 2 x DB9 cable
Protection
ƒƒ EFT Protection
ƒƒ Isolation Protection
ƒƒ ESD Protection
1 KV
2,500 VDC
8KV (air), 4KV (contact)
Serial Communication Cards
All product specifications are subject to change without notice
Last updated : 19-Mar-2014
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising