SeaMetrics IP80 Insertion Paddlewheel

SeaMetrics IP80 Insertion Paddlewheel
IP80 Series Flow Sensor
Specifications
Specifications
Sensor
Hall Effect Sensor
12 VDC current sinking pulse
Materials
Sensor Body
PVC, Polypro, Brass,
or 316 SS
Kynar
Nickel-bound
tungsten carbide,
ceramic optional
Ruby jewel
Rotor
Shaft
General Information
The IP80 Series are impeller-type insertion meters designed for use in pipe sizes 1/2" to 8". High-quality jewel
bearings and nickel-bound tungsten carbide shaft are used
for maximum life and extreme low friction. Bodies are machined from solid rod for maximum precision. Low-flow performance is superior. The rotation of the rotor is detected
by a non-drag Hall-effect sensor. Output is a pulse-type
square wave, which can be sent long distances (up to 2,000
feet) without a transmitter. This signal can be connected
directly to SeaMetrics controls, as well as PLC's, counters,
and computer cards.
SeaMetrics IP meters are ideal for chemical proportioning
applications. If no display is required, a simple divider such
as the PD10 provides adjustable pump pacing. For rate
and total display, as well as pump pacing, the FT415/420
flow indicator can be mounted directly on the IP80 Series,
or remotely on a wall or panel.
The IP80 Series require special fittings, since they are not
depth-adjustable as are the IP 100/200 series meters.
Installation in the fitting ensures correct depth placement
in the pipe. Fittings are available in PVC, brass, and stainless steel. Sensors are available in brass, 316 stainless
steel, PVC, and polypropylene. In plastic pipe 3"-8", use
an IP82 sensor, which is 1.00" longer than the IP81 to
accommodate the larger fittings.
Bearings
Maximum Pressure
PVC
Polypro
Brass
316 SS
Maximum Temperature
PVC,Polypro
Brass, SS
Accuracy
Flow Range (GPM)
175 PSI (12 bar) at 75° *
175 PSI (12 bar) at 75° *
200 PSI (14 bar)
250 PSI (17 bar)
130° F (55° C)*
200° F (93° C)
1-1/2% FS
1/2" 3/4"
1" 1-1/2"
2"
3"
4"
6"
8"
Min
0.28
0.5
0.8
1.9
3.1
6.9
12
27
47
Max
28
50
80
190
314
691 1200 2700 4700
Cable
#22 AWG 3-con, 18'
* (see Pressure vs. Temperature chart)
Fittings Compatability Chart
Material
IP81
IP82
Bronze
1"- 4" Tee
3"- 8" Braze fitting
PVC
1/2"- 2" Tee
3"- 8" Saddle
Polypro
N/A
3"- 8" Tee
Stainless steel
1/2"- 2" Tee
3"- 8" Weld fitting
Carbon steel
1/2"- 2" Tee
3"- 8" Weld fitting
LT-10635A
Page 1 of 2
Features
High level (12 VDC)
signal can be sent
up to 2000+ feet
without transmitter
Meter mount option
for electronics:
FT415/420 (Rate/Total)
AO55 (4-20 mA)
PD10 (Divider)
Fitting automatically
sets probe at correct
depth and orientation
Jewel bearings for
superior low-flow
performance.
Threaded housings
allow for field repair
Each fitting individually
calibrated and marked
with K-factor
(Pulses per Gallon)
MODEL
SERIAL
PVC Working Pressure vs. Temperature
60˚
200
70˚
80˚
90˚
100˚
110˚
120˚
130˚
140˚
Dimensions: PVC Fittings
Fitting Length
Size
Dim. A
1/2"
14-1/2"
150
3/4"
18-1/2"
1"
18-1/2"
100
1-1/2"
P.S.I
50
20"
2"
20"
3"
*
4"
*
6"
*
A
* Requires saddle
How To Order
Material Code: P (PVC), Y (Polypro), K (PVDF), B (Brass), S (316 SS)
Option Code: (see options at right)
Option codes:
01
Ceramic shaft
06
LMI connector
IP81 _____ - _____
07
SeaMetrics connector
IP82 _____ - _____
2 of 2
20419 80th Ave. So., Kent, WA 98032 USA
Phone: 253-872-0284 Fax: 253-872-0285
www.seametrics.com 1-800-975-8153
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising