ARX605 Manual
ARX 605 User Reference Manual
Model No
cPCI Standards
Form Factor
Accessible Slots
Rear I/O
Drive bay
Power Supply
Carrying Case
5-slot 64-bit/ 66 MHz 6U cPCI CT bus backplane
PICMG 2.5H. 110CT bus
2.0 R3.0, 2.1 R2.0, 2.5 R1.0
6U CompactPCI
1 system slot & 4 Peripheral slots
P3 & P5 rear I/O
15", 1024x 768 TFT LCD Monitor with touch screen
One slim DVD-ROM
Integrated keyboard and touchpad, RJ-45 connector
Operating Life of Keys: 8 million cycles
Keyboard Layout: CH, FR, GR, KR, RU, SP, UK, US
1U, 400W, 100~240VAC Power supply, Auto switch
Rugged Aluminum Construction with shock absorbing rubber corners
422Wx 285Hx 227D mm
12 kgs
Padded carrying case with wheels
Environmental Factors
Relative Humidity
Standard Accessory Kits
ARX 605
Accessory Kit SKD
ARX605 Portable Computer Chassis
Carrying Case with wheels
User’s Manual
Power Cord
VGA to VGA cable (180mm)
DVI-D to DVI-D cable (180mm)
USB to USB cable (180mm)
Anti-Static Bag
Carrying Case with Wheels
1.0 Introduction
Version: 2015.03
ARX 605 features:
● Designed for portable instrument applications
● 6U compactPCI and PICNG 2.5 H.110 CT Bus
● PICMG 2.1 Hot Swap compliant 32-bit or 64-bit 5-slot CompactPCI backplane with
P3 & P5 rear IO
● Built-in 15” LCD display with touch screen, 1024x 768, 16.2M, 250 nits brightness
● One system slot and 4 peripheral slots
● Aluminum Alloy Housing design
● Integrated keyboard and touchpad
● 1U 400W power supply, 100~240VAC
● Built-in slim DVD-ROM device
● Carrying case to manage portable PC with ease
The ARX605 is a 6-slot 6U Compact PCI portable computer chassis. It supports one system slot
and 5 Compact PCI Peripheral slots. The ARX605 provides 15” high brightness TFT LCD display
with touch screen, allows users to fully enjoy the beauty of true colors and easy to control. ARX605
integrates 87 keys multi-languages keyboard and touchpad. It is a powerful and versatile portable
chassis that allows users develop the test and measurement applications, and capable of a wide
range of applications, such as power industry applications, military applications, and
telecommunication applications.
2.0 Getting Started
2.0 Operation
1. Releasing Keyboard from main unit by pushing up the 2 taps located on both side of the
chassis to release the locking mechanism, and then pull out the keyboard.
Lift up
Press to release
Lift up
2. You have the option of leaving the keyboard attached to the chassis or they can be release
independently from the chassis by pushing the two levers inward to release the lock.
3. Connect the RJ-45 keyboard/touchpad cable to the front bottom right corner of the chassis.
Make sure the pin direction is correct when inserting.
4. You can flip the 2 feet located underneath the chassis outward to help create an angle for the
chassis for viewing comfort.
2 feet
5. Access the available 1 system slot for 6U CompactPCI controller and 4 peripheral slots on the
right side of the chassis.
6U CompactPCI controller slot
4 peripheral slots
6. There are USB, DVI-D and VGA connectors on the right side of the system slot
VGA connector
DVI-D connector
USB connector
7. Connect the ARX605 USB connector to CPU controller USB port
Connect the ARX605 VGA or DVI-D connector to CPU controller VGA or DVI-D port
VGA to VGA cable
8. Connect the power cable into the power supply unit
Insert Power Cord
9. Press the power switch located on the front panel of the chassis to power up the unit.
There have indicator LED lights for Power and LCD OSD and DVD-ROM in the right side
Power LED light
LCD OSD manual
Press Once to Power On
10. Keyboard and touchpad surface act as input for the system.
Keyboard LED
Touchpad + Button
11. Close the left side and right side dust cover to protect the ARX605 system.
Left side dust cover
Right side dust cover
3.0 Troubleshooting
1. Installation problem:
1. Normally problem with a fail start up is due to installation problem.
2. Double check all the peripheral cards or items you have added to the ARX.
3. Are all the items seated properly?
4. Are all the cables connected back to its original or correct position?
5. Are the items you have added compatible?
6. Before you check for these, turn the computer off and unplug the power cord.
7. Check for 1 thru 5 and then re-power up the computer.
8. Remove all items that were added and re-try system power up.
9. If the system starts now, try inserting 1 new item in at a time and try powering up.
10. Repeat this step until you get the desired result.
2. System Fails to power up:
1. Check you power connection first.
2. Check the main power switch is in the ON positions (I) *If cold switch is available.
3. Press the power button located on the machine.
3. No display (LCD):
1. Check all the proper power up procedure has been taken.
2. Hook up an external LCD to the VGA port, to check if video is present.
3. If video is present on external LCD, check the internal LCD cable connection.
4. Or check your VGA setting to make sure LCD video is enabled.
5. If there is no video on external, check your system to make sure everything is seated
6. If everything is seated properly and still no video, call us for further assistance.
4. External LCD no display:
1. Check to see if you have internal LCD video.
2. Check if your LCD is functioning properly.
3. Check your VGA setting to make sure external video is enabled.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF