Thermocouple Terminal blocks din rail mounTing and audiT capable DRTB-2 Series

Thermocouple Terminal blocks din rail mounTing and audiT capable DRTB-2 Series
Thermocouple
terminal blocks
din rail mounting and audit capable
DRTB-2 Series
l UL Component Recognized
l Type K, J, T, E, N, R/S
and U Calibrations
l Screw Type Terminal for
Secure and Maintenance
Free Connections
l Built-In Miniature Female
Thermocouple Connector for
Auditing and Troubleshooting
l Uses Industry Standard Marker
Strips for Labeling
l Fully Enclosed—
No End Plates Required
l DIN Rail Mountable—Narrow
10.7 mm Width
l Identified with Calibration and
“+, -” Connections
Tap Into
Advanced
Connectivity!
DRTB-RAIL-3575,
sold separately.
DRTB-K-2, thermocouple
terminal block shown with
XBMZB10-10PK white blank
marker strip (sold separately).
SMPW-K-M,
sold separately.
PATENTED
US Patent No 8,545,277
Extreme performance
20 lb
Shown with RECK1-10 cable, HH806AU data logger/thermometer, with USB interface,
and DP41 panel meter (inset), sold separately.
The new patented DRTB-2 Series
thermocouple terminal blocks are
manufactured with thermocouple-grade alloys
to guarantee accurate readings. A built-in
SMP-compatible female receptacle accepts
a miniature thermocouple connector. The
female connector allows the user to connect
to a handheld meter for applications such as
data collection, quality assurance compliance,
capability studies and trouble shooting
installation or repairs.
The plastic housing is made from gray
polyamide 6.6 thermoplastic resin with a
UL 94 V0 rating for 85°C. These
thermocouple terminal blocks are fully
enclosed and require no end plates. The
screws are stainless steel and captive and
the wire clamps are made of tin plated brass.
Together they provide an excellent vibration,
maintenance free and corrosion resistant
connection.
DRTB-2 terminal blocks mount on standard
35 mm DIN rails or 32 mm G-type rails,
and are identified with calibration type and
positive (+) and negative (-) connections.
Wire entry is funneled to allow quick wire
insertion even with stranded wire.
L-1
SPECIFICATIONS
Width: 10.7 mm (0.422")
Length/Height:
52.8 mm (2.08")/42.3 mm (1.666")
Installed Height to 35 x 7.5 mm/
35 x 15 mm DIN Rail:
43.5 mm (1.713")/52.8 mm (2.08")
Wire Gauge Ranges: 14-24 solid wire;
16-24 stranded wire
Wire Strip Length: 8 mm (0.31")
Torque in Nm (in-lb): 0.4 (3.54) ±10%
Temperature Rating: -40 to 85°C
(-40 to 185°F)
DRTB-T-2-10PK,
10 pack.
SNAP-IN MARKER
SOLD SEPARATELY
MINIATURE
Shown
actual size.
THERMOCOUPLE
CONNECTOR
(TYPE SMP)
FRONT FACE IS
CLEARLY DESIGNED
FOR EASY USE
CALIBRATION
CODE
MINIATURE
THERMOCOUPLE
CONNECTOR
(TYPE SMP)
DRTB-T-2-50PK,
50 pack.
POSITIVE
CONNECTION
POSITIVE
CONNECTION
XBMZB10-10PK,
marker strips,
package of 10
(100 markers).
NEGATIVE
CONNECTION
SNAP-IN MARKER
DRTB-(*)-UL
FULLY COMPENSATED
DIN RAIL MOUNTED
TERMINAL BLOCK
TED
ED
K
NEGATIVE
CONNECTION
POSITIVE
CONNECTION
SOLD SEPARATELY
XBMZB10-10PK
PACKAGE OF 10 WHITE
BLANK MARKER STRIPS
(100 MARKERS)
SOLDNEGATIVE
SEPARATELY
52.83
10.72
CONNECTION
MINIATURE
THERMOCOUPLE
CONNECTOR
(TYPE SMP)
FRONT FACE IS
CLEARLY DESIGNED
FOR EASY USE
CALIBRATION
CODE
42.3
MINIATURE
THERMOCOUPLE
CONNECTOR
(TYPE SMP)
POSITIVE
CONNECTION
XBMZB10-10PK
PACKAGE OF 10 WHITE
BLANK MARKER STRIPS
(100 MARKERS)
SOLD SEPARATELY
Model No.
DRTB-K-2
DRTB-T-2
DRTB-J-2
DRTB-E-2
DRTB-N-2
DRTB-U-2
DRTB-R/S-2
36
NEGATIVE
CONNECTION
Dimensions: mm (inch)
To Order
DRTB-K-2 shown with RECK1-10,
retractable extension cable, 0.3 m (1').
52.83
10.72
Compensating Alloys
Calibration
Alloy Code
+
KCHROMEGA®ALOMEGA®
T CopperConstantan
36
J
IronConstantan
42.3
ECHROMEGA®Constantan
NOMEGA-P®OMEGA-N®
U CopperCopper
R/S CopperRNX/SNX
Note: This item is available in single unit and multipack configurations.
Ordering Example: DRTB-K-2 (single); DRTB-K-2-10PK (10 pack); DRTB-K-2-50PK (50 pack).
Accessories
MODEL NO.
DRTB-RAIL-3575
DRTB-RAIL-3575-1
DRTB-RAIL-3515
DRTB-RAIL-3515-1
XBMZB10-10PK
HH806AU
REC(*)1-10
REC(*)4-10
Description
DIN rail, 35 x 7.5 mm x 2 m (1.4 x 0.30" x 6.6'), slotted
DIN rail, 35 x 7.5 mm x 1 m (1.4 x 0.30" x 3.3'), slotted
DIN rail, 35 x 15 mm x 2 m (1.4 x 0.60" x 6.6'), slotted
DIN rail, 35 x 15 mm x 1 m (1.4 x 0.60" x 3.3'), slotted
White blank marker strip, pkg of 10 (100 markers)
Thermocouple dual input meter with USB and DC power jack
Retractable extension cable with 2 SMP miniature male connectors, 0.3 m (1') (expands to 1.5 m (5')
Retractable extension cable with 2 SMP miniature male connectors, 1.2 m (4') (expands to 6.1 m (20')
(*) Specify thermocouple calibration: J, K, T or E
Ordering Example: DRTB-K-2, Type K thermocouple terminal block for DIN rail mounting with RECK1-10, Type K, 0.3 m (1') retractable
extension cable.
L-2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising