0709-A

0709-A
MODEL No:
441 Saw Mill River Road, Yonkers, NY 10701 (914) 476-9000
0709-A
ISSUED:
1-87
REVISED:
9-96
TOWEL SHELF
SPECIFICATION
Towel Shelf shall be triple chrome plated and rust proof with four (4) equally spaced 3/8" (10mm) dia. tubes fixed between two (2) brackets.
Concealed adjustable screw mountings & non-breakable steel plates shall be provided. Shelf shall be tamper resistant by using hardened stainless
steel screws to anchor brackets to wall plates.
Towel Shelf shall be Model No 0709-A as fabricated by American Specialties, Inc. 441 Saw Mill River Road Yonkers, New York 10701-4913.
INSTALLATION
Unit is surfaced mounted on wall or partition using No10 self tapping screws (supplied) through mounting holes in anchor brackets. Concealed
screw mountings can still be adjusted once attached to wall. Ensure that mounting configuration complies with local building codes. Recommended mounting height is 66" (1676mm) from the top of shelf to finished floor. To comply with ADA Accessibility Guidelines top of shelf should
be lower than 54" (1372mm) maximum above finished floor if clear floor side reach access is provided or 48" (1219mm) maximum above finished
floor if clear floor side reach access is provided or 48" (1219mm) max. AFF if clear floor forward reach access is provided or 46" (1168mm) max.
AFF if side reach over an obstruction is only provided (ie: vanity).
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising